Web Hosting Talk : Web Hosting Main Forums : Dedicated Server : I need help

[Rick Lee]

I recenctly brought 1 100TB Servers about 2 weeks ago.

http://imgcafe.com/view/uploads/1zjz.jpg
I am getting one of the temp gauges showing an minus symbol,?

i cannot access the IMPI its gone dead and no responce from the datacenter for around 2 hours now. and its really annoying. as the server won't even function. with XEN properly. neither vmware?
i need to get the IPS changed subnets, If i do that. I will loose most my my IP'S.

the server keeps showing some internal error during an OS reload.

System Temperature -106.000 degrees C
CPU Temperature 0x1 discrete
FAN 1 7985.000 RPM
FAN 2 7985.000 RPM
FAN 3 7245.000 RPM
FAN 4 7615.000 RPM
FAN 5 na RPM
CPU Vcore 0.920 Volts
+3.3VCC 3.232 Volts
+12 V 12.084 Volts
CPU DIMM 1.552 Volts
+5 V 5.088 Volts
-12 V -12.292 Volts
VBAT 3.136 Volts
+3.3VSB 3.232 Volts
AVCC 3.232 Volts
Chassis Intru 0x1 discrete
PS Status 0x1 discrete
Even the stats here look wrong.

I have had several issues. Can only max output 11.5MBS from chacefly CDN.

[atlasnetworkseric]

I suspect you're pulling data from a register that isn't a temperature sensor. This can happen if you didn't pick the exact right board.

Originally Posted by Rick Lee

I have had several issues. Can only max output 11.5MBS from chacefly CDN.

Is it a 100Mbps port? If so, that's about right, though perhaps a touch on the low side.

[Rick Lee]

Originally Posted by atlasnetworkseric

Is it a 100Mbps port? If so, that's about right, though perhaps a touch on the low side.

You can max output from 100MBS 12.5MBS
And the server is from 100TB all Pure dedicated 1GB'S Uplinks. I asked them to re-configure the switch. they did so. it dropped from max of 50MBS to around 10MBS.

I have seen people always bragging about 85MBS+ from softlayer true gigabit uplinks.

[anon-e-mouse]

Thread closed by request.