Web Hosting Talk : Advertising Forums : Web Hosting Related Offers & Requests : Web Hosting Hardware : Selling a Cisco 2801 Router with 2 WIC T1 Cards C2801-SPSERVICESK9-M

[MikeTrike]

Selling a Cisco 2801 Router with 2 WIC T1 Cards

Was never used in a production environment, only programmed and packed away, never to be powered on again until today. I just erased the startup-config on it, so it's fresh and ready for use. This thing literally is BRAND NEW!

Items Included:
1 x Cisco 2801 Router (C2801-SPSERVICESK9-M)
2 x Cisco T1 DSU/CSU WAN Interface Card (WIC-1DSU-T1-V2)

Other Items:
Console/Serial Cables
All Power Cables and documents.
Rack Ears and other misc. accessory items.
External US Robotics Modem if you want it for remote management.

IOS Version Installed: 12.4(13r)T

How much do I want?
Make an offer, I've seen them used from $1000 to $3,000 new and used with no WIC's. Please consider this one is actually brand new and includes everything plus two T1 WIC's

How much for shipping?
$30 for anywhere in the continental U.S.

How can I pay you?
Whatever you are comfortable with, cash, business check, credit card. I'm even open to trade for newer server gear that I can use for VPS related applications.

Do you have any pictures of the router?
Yes, and I will upload them in a few hours when I get home.

To satisfy the rest of the forum rules:
Auction is WHT forum exclusive, unless it does not sell. At which time I will update this thread.

For the sake of forum rules I'll say $2,500~ and you all can work from there, make offers in USD or server related hardware.

Consider this offer active until a deal is reached or May 9th, 2010.

Transfer ownership to the winner will be handled by FedEx ground upon payment or a deal that is reached in trade.

Originally Posted by Cisco Boot Information

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
PLD version 0x10
GIO ASIC version 0x127
c2801 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled


Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80

program load complete, entry point: 0x8000f000, size: 0x1887ac4
Self decompressing the image : ###################################################################################################################################################### ################################################################################################################################# [OK]

Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0X003AA110 public buffer pools
0X00211000 public particle pools
0X00020000 Crypto module pools
0X00120000 VPM buffer pools
0X0052 0X0001A800 Card in slot 1
0X0052 0X0001A800 Card in slot 2
0X000021B8 Onboard USB

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.

Allocating additional 16607313 bytes to IO Memory.
PMem allocated: 241172480 bytes; IOMem allocated: 27262976 bytes

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(6)T7, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 29-Mar-07 05:41 by khuie
Image text-base: 0x6008BDC8, data-base: 0x62700000


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2801 (revision 7.0) with 235520K/26624K bytes of memory.
Processor board ID FTX1305Z2SS
2 FastEthernet interfaces
2 Serial interfaces
1 DSP, 8 Voice resources
WIC T1-DSU
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)


--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]:


Press RETURN to get started!


*May 5 19:09:31.203: SERVICE_MODULE(Serial0/1/0): self test finished: Passed
*May 5 19:09:33.995: SERVICE_MODULE(Serial0/2/0): self test finished: Passed
*May 5 19:09:39.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*May 5 19:09:39.715: %LINK-3-UPDOWN: Interface Serial0/1/0, changed state to down
*May 5 19:09:39.715: %LINK-3-UPDOWN: Interface Serial0/2/0, changed state to down
*May 5 19:09:40.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down
*May 5 19:09:40.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/2/0, changed state to down
*May 5 19:09:41.299: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
*May 5 19:09:41.299: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
*May 5 19:09:44.375: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(6)T7, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 29-Mar-07 05:41 by khuie
*May 5 19:09:44.383: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*May 5 19:09:44.547: %SYS-6-BOOTTIME: Time taken to reboot after reload = 96 seconds
*May 5 19:09:46.007: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
*May 5 19:09:46.007: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
*May 5 19:09:46.007: %LINK-5-CHANGED: Interface Serial0/1/0, changed state to administratively down
*May 5 19:09:46.007: %LINK-5-CHANGED: Interface Serial0/2/0, changed state to administratively down
*May 5 19:09:47.263: %DSPRM-5-UPDOWN: DSP 1 in slot 0, changed state to up
Router>enable
Router#show run
Building configuration...

Current configuration : 700 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
resource policy
!
ip cef
!
voice-card 0
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1/0
no ip address
shutdown
!
interface Serial0/2/0
no ip address
shutdown
!
ip http server
no ip http secure-server
!
control-plane
!
line con 0
line aux 0
line vty 0 4
login
!
scheduler allocate 20000 1000
end

Router#

[MikeTrike]

Still open to offers, remember I posted a number to comply with forum rules. Otherwise I would not have, so any and all serious offers will be considered.

[MyriadSupplyMike]

Hi Mike,

Can you let me know your email address so I can email you my offer?

msloan@myriadsupply.com

Thanks,
Mike

[MikeTrike]

Sold to Mike @ myraidsuply