Results 1 to 5 of 5
  1. #1

    OpenVPn wif openvz

    hi,

    i install openvz on my server and now i want to install openvpn on a vps

    i got it work with iptable cuz i follow tut which very easy...

    i got error:
    Code:
    /etc/init.d/openvpn start 
    Starting virtual private network daemon: server failed! 
    server1:~# /usr/sbin/openvpn --config /etc/openvpn/server.conf 
    Mon Aug 17 12:16:49 2009 OpenVPN 2.1_rc11 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Sep 18 2008 
    Mon Aug 17 12:16:49 2009 Cannot open dh1024.pem for DH parameters: error:02001002:system library:fopen:No such file or directory: error:2006D080:BIO routines:BIO_new_file:no such file 
    Mon Aug 17 12:16:49 2009 Exiting 
    server1:~#
    i google error someone say it is my server.conf file for openvpn so i attach it please tell me if i have error

    Code:
    #################################################
    # Sample OpenVPN 2.0 config file for #
    # multi-client server. #
    # #
    # This file is for the server side #
    # of a many-clients <-> one-server #
    # OpenVPN configuration. #
    # #
    # OpenVPN also supports #
    # single-machine <-> single-machine #
    # configurations (See the Examples page #
    # on the web site for more info). #
    # #
    # This config should work on Windows #
    # or Linux/BSD systems. Remember on #
    # Windows to quote pathnames and use #
    # double backslashes, e.g.: #
    # "C:\\Program Files\\OpenVPN\\config\\foo.key" #
    # #
    # Comments are preceded with '#' or ';' #
    #################################################
    #
    # Which local IP address should OpenVPN
    # listen on? (optional)
    ;local a.b.c.d
    #
    # Which TCP/UDP port should OpenVPN listen on?
    # If you want to run multiple OpenVPN instances
    # on the same machine, use a different port
    # number for each one. You will need to
    # open up this port on your firewall.
    port 1194
    #
    # TCP or UDP server?
    #proto tcp
    proto udp
    #
    # "dev tun" will create a routed IP tunnel,
    # "dev tap" will create an ethernet tunnel.
    # Use "dev tap0" if you are ethernet bridging
    # and have precreated a tap0 virtual interface
    # and bridged it with your ethernet interface.
    # If you want to control access policies
    # over the VPN, you must create firewall
    # rules for the the TUN/TAP interface.
    # On non-Windows systems, you can give
    # an explicit unit number, such as tun0.
    # On Windows, use "dev-node" for this.
    # On most systems, the VPN will not function
    # unless you partially or fully disable
    # the firewall for the TUN/TAP interface.
    ;dev tap
    dev tun
    #
    # Windows needs the TAP-Win32 adapter name
    # from the Network Connections panel if you
    # have more than one. On XP SP2 or higher,
    # you may need to selectively disable the
    # Windows firewall for the TAP adapter.
    # Non-Windows systems usually don't need this.
    ;dev-node MyTap
    #
    # SSL/TLS root certificate (ca), certificate
    # (cert), and private key (key). Each client
    # and the server must have their own cert and
    # key file. The server and all clients will
    # use the same ca file.
    #
    # See the "easy-rsa" directory for a series
    # of scripts for generating RSA certificates
    # and private keys. Remember to use
    # a unique Common Name for the server
    # and each of the client certificates.
    #
    # Any X509 key management system can be used.
    # OpenVPN can also use a PKCS #12 formatted key file
    # (see "pkcs12" directive in man page).
    ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt
    cert /etc/openvpn/easy-rsa/2.0/keys/server.crt
    key /etc/openvpn/easy-rsa/2.0/keys/server.key # This file should be kept secret
    #
    # Diffie hellman parameters.
    # Generate your own with:
    # openssl dhparam -out dh1024.pem 1024
    # Substitute 2048 for 1024 if you are using
    # 2048 bit keys.
    dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem
    #
    # Configure server mode and supply a VPN subnet
    # for OpenVPN to draw client addresses from.
    # The server will take 10.8.0.1 for itself,
    # the rest will be made available to clients.
    # Each client will be able to reach the server
    # on 10.8.0.1. Comment this line out if you are
    # ethernet bridging. See the man page for more info.
    server 10.8.0.0 255.255.255.0
    #
    # Maintain a record of client <-> virtual IP address
    # associations in this file. If OpenVPN goes down or
    # is restarted, reconnecting clients can be assigned
    # the same virtual IP address from the pool that was
    # previously assigned.
    ifconfig-pool-persist ipp.txt
    #
    # Configure server mode for ethernet bridging.
    # You must first use your OS's bridging capability
    # to bridge the TAP interface with the ethernet
    # NIC interface. Then you must manually set the
    # IP/netmask on the bridge interface, here we
    # assume 10.8.0.4/255.255.255.0. Finally we
    # must set aside an IP range in this subnet
    # (start=10.8.0.50 end=10.8.0.100) to allocate
    # to connecting clients. Leave this line commented
    # out unless you are ethernet bridging.
    ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
    #
    # Configure server mode for ethernet bridging
    # using a DHCP-proxy, where clients talk
    # to the OpenVPN server-side DHCP server
    # to receive their IP address allocation
    # and DNS server addresses. You must first use
    # your OS's bridging capability to bridge the TAP
    # interface with the ethernet NIC interface.
    # Note: this mode only works on clients (such as
    # Windows), where the client-side TAP adapter is
    # bound to a DHCP client.
    ;server-bridge
    #
    # Push routes to the client to allow it
    # to reach other private subnets behind
    # the server. Remember that these
    # private subnets will also need
    # to know to route the OpenVPN client
    # address pool (10.8.0.0/255.255.255.0)
    # back to the OpenVPN server.
    push "route 192.168.0.0 255.255.255.0"
    ;push "route 192.168.20.0 255.255.255.0 10.8.0.9"
    #
    # To assign specific IP addresses to specific
    # clients or if a connecting client has a private
    # subnet behind it that should also have VPN access,
    # use the subdirectory "ccd" for client-specific
    # configuration files (see man page for more info).
    #
    # EXAMPLE: Suppose the client
    # having the certificate common name "Thelonious"
    # also has a small subnet behind his connecting
    # machine, such as 192.168.40.128/255.255.255.248.
    # First, uncomment out these lines:
    ;client-config-dir ccd
    ;route 192.168.40.128 255.255.255.248
    # Then create a file ccd/Thelonious with this line:
    # iroute 192.168.40.128 255.255.255.248
    # This will allow Thelonious' private subnet to
    # access the VPN. This example will only work
    # if you are routing, not bridging, i.e. you are
    # using "dev tun" and "server" directives.
    #
    # EXAMPLE: Suppose you want to give
    # Thelonious a fixed VPN IP address of 10.9.0.1.
    # First uncomment out these lines:
    ;client-config-dir ccd
    ;route 10.9.0.0 255.255.255.252
    # Then add this line to ccd/Thelonious:
    # ifconfig-push 10.9.0.1 10.9.0.2
    #
    # Suppose that you want to enable different
    # firewall access policies for different groups
    # of clients. There are two methods:
    # (1) Run multiple OpenVPN daemons, one for each
    # group, and firewall the TUN/TAP interface
    # for each group/daemon appropriately.
    # (2) (Advanced) Create a script to dynamically
    # modify the firewall in response to access
    # from different clients. See man
    # page for more info on learn-address script.
    ;learn-address ./script
    #
    # If enabled, this directive will configure
    # all clients to redirect their default
    # network gateway through the VPN, causing
    # all IP traffic such as web browsing and
    # and DNS lookups to go through the VPN
    # (The OpenVPN server machine may need to NAT
    # or bridge the TUN/TAP interface to the internet
    # in order for this to work properly).
    ;push "redirect-gateway def1 bypass-dhcp"
    push "redirect-gateway def1"
    #
    # Certain Windows-specific network settings
    # can be pushed to clients, such as DNS
    # or WINS server addresses. CAVEAT:
    # http://openvpn.net/faq.html#dhcpcaveats
    # The addresses below refer to the public
    # DNS servers provided by opendns.com.
    push "dhcp-option DNS 192.168.0.2"
    ;push "dhcp-option DNS 208.67.220.220"
    #
    # Uncomment this directive to allow different
    # clients to be able to "see" each other.
    # By default, clients will only see the server.
    # To force clients to only see the server, you
    # will also need to appropriately firewall the
    # server's TUN/TAP interface.
    ;client-to-client
    #
    # Uncomment this directive if multiple clients
    # might connect with the same certificate/key
    # files or common names. This is recommended
    # only for testing purposes. For production use,
    # each client should have its own certificate/key
    # pair.
    #
    # IF YOU HAVE NOT GENERATED INDIVIDUAL
    # CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
    # EACH HAVING ITS OWN UNIQUE "COMMON NAME",
    # UNCOMMENT THIS LINE OUT.
    ;duplicate-cn
    #
    # The keepalive directive causes ping-like
    # messages to be sent back and forth over
    # the link so that each side knows when
    # the other side has gone down.
    # Ping every 10 seconds, assume that remote
    # peer is down if no ping received during
    # a 120 second time period.
    keepalive 10 120
    #
    # For extra security beyond that provided
    # by SSL/TLS, create an "HMAC firewall"
    # to help block DoS attacks and UDP port flooding.
    #
    # Generate with:
    # openvpn --genkey --secret ta.key
    #
    # The server and each client must have
    # a copy of this key.
    # The second parameter should be '0'
    # on the server and '1' on the clients.
    ;tls-auth ta.key 0 # This file is secret
    #
    # Select a cryptographic cipher.
    # This config item must be copied to
    # the client config file as well.
    cipher BF-CBC # Blowfish (default)
    ;cipher AES-128-CBC # AES
    ;cipher DES-EDE3-CBC # Triple-DES
    #
    # Enable compression on the VPN link.
    # If you enable it here, you must also
    # enable it in the client config file.
    comp-lzo
    #
    # The maximum number of concurrently connected
    # clients we want to allow.
    ;max-clients 100
    #
    # It's a good idea to reduce the OpenVPN
    # daemon's privileges after initialization.
    #
    # You can uncomment this out on
    # non-Windows systems.
    ;user nobody
    ;group nogroup
    #
    # The persist options will try to avoid
    # accessing certain resources on restart
    # that may no longer be accessible because
    # of the privilege downgrade.
    persist-key
    persist-tun
    #
    # Output a short status file showing
    # current connections, truncated
    # and rewritten every minute.
    status openvpn-status.log
    #
    # By default, log messages will go to the syslog (or
    # on Windows, if running as a service, they will go to
    # the "\Program Files\OpenVPN\log" directory).
    # Use log or log-append to override this default.
    # "log" will truncate the log file on OpenVPN startup,
    # while "log-append" will append to it. Use one
    # or the other (but not both).
    ;log openvpn.log
    ;log-append openvpn.log
    #
    # Set the appropriate level of log
    # file verbosity.
    #
    # 0 is silent, except for fatal errors
    # 4 is reasonable for general usage
    # 5 and 6 can help to debug connection problems
    # 9 is extremely verbose
    verb 3
    #
    # Silence repeating messages. At most 20
    # sequential messages of the same message
    # category will be output to the log.
    ;mute 20
    #
    tls-auth /etc/openvpn/easy-rsa/2.0/keys/ta.key 0
    it have many ip in there do i need change? to my server ip or do i leave it defult...

    ty please help

  2. #2
    Join Date
    May 2006
    Location
    NJ, USA
    Posts
    6,456
    Next time you post configs, please follow:

    Quote Originally Posted by VPNHelper
    "configs" is (#1) please pastebin your client and server configs (with comments removed, you can use `grep -vE '^#|^;|^$' server.conf`), also include which OS and version of openvpn., or (#2) dont forget to include any ccd entries
    Also, see:

    Quote Originally Posted by VPNHelper
    "logs" is (#1) is please pastebin your logfiles from both client and server with verb set to 6, or (#2) In Tunnelblick, right-click and select copy to copy log text to clipboard.
    Once you put the comment stripped configs on here and the logs, then I will assist you.


    You also may be better over at www.ovpnforum.com
    simplywww: directadmin and cpanel hosting that will rock your socks
    Need some work done in a datacenter in the NYC area? NYC Remote Hands can do it.

    Follow my "deals" Twitter for hardware specials.. @dougysdeals

  3. #3
    Join Date
    Jul 2009
    Posts
    178

    Openvpn

    the openvpn script is probably executing /bin/modprobe or /usr/bin/modprobe

    you need to edit it, and tell it that modprobe is at sbin.

    /sbin/modprobe

  4. #4
    Join Date
    Jul 2009
    Posts
    240
    1. did you generate a dh.pem file?

    2. is the location of that file the same as in your config?

    3. check the file permission of that file.

  5. #5
    Join Date
    Aug 2009
    Location
    rules.php
    Posts
    110
    >> Mon Aug 17 12:16:49 2009 Cannot open dh1024.pem for DH parameters:

    After you build the server and client keys, you may need to execute the following command (In the openvpn folder)

    ./build-dh

    Make sure that you have the right permission,

    chmod 700 /etc/openvpn/easy-rsa/2.0/keys/
    chmod 644 /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem3

    Thanks

Similar Threads

  1. Urgent:: Need someone who is expert on openvpn and openvz/xen
    By jolly in forum Systems Management Requests
    Replies: 8
    Last Post: 08-18-2009, 03:58 AM
  2. OpenVPN
    By bdwarr6 in forum Systems Management Requests
    Replies: 8
    Last Post: 06-07-2009, 03:36 PM
  3. Replies: 4
    Last Post: 12-10-2008, 05:31 PM
  4. Replies: 0
    Last Post: 08-31-2008, 12:24 AM
  5. openvz port and openvpn
    By robocap in forum Hosting Security and Technology
    Replies: 14
    Last Post: 05-17-2008, 02:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •