Tracking down an error... Seagate drive which isnt in the database for smartctl
=== START OF INFORMATION SECTION ===
Device Model: ST380011A
Serial Number: 5JV05DB8
Firmware Version: 3.06
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Wed Jul 12 11:19:23 2006 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Off-line data collection status: (0x82) Offline data collection activity
completed without error.
Auto Off-line Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete off-line
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Automatic timer ON/OFF support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 054 054 006 Pre-fail - 9031193
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age - 88
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail - 0
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail - 731884839
9 Power_On_Hours 0x0032 076 076 000 Old_age - 21606
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age - 74
194 Temperature_Celsius 0x0022 027 053 000 Old_age - 27
195 Hardware_ECC_Recovered 0x001a 054 054 000 Old_age - 9031193
197 Current_Pending_Sector 0x0012 100 100 000 Old_age - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age - 0
202 Unknown_Attribute 0x0032 100 253 000 Old_age - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log, version number 1
No self-tests have been logged
There is a lot of seek_error_rate and it gets higher each time I look at it. Ive heard that seagate drives are not unknown to have false errors but what are your opinions?
Linear Mode
