Results 1 to 3 of 3
  1. #1

    How to get more info about SCSI drives installed in server

    Hello,

    How do I find out what kind of SCSI drive (like RPM, model...) is attached to the server? I just know there are 2 drives (like sda/sdb)
    Thanks

    Code:
    [email protected] [~]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/sda1             7.9G  1.6G  5.9G  22% /
    /dev/sdb1              57G  252M   54G   1% /home
    none                 1005M     0 1005M   0% /dev/shm
    /dev/sda5             487M  8.1M  454M   2% /tmp
    /dev/sda2              20G  269M   19G   2% /var
    Code:
    [email protected] [~]# dmesg|grep scsi
    scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
    (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
    (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
    scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
    scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
    Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0

  2. #2
    Join Date
    Mar 2001
    Posts
    1,434
    dmesg|grep -i vendor
    dmesg|grep -i model


    - John C.

  3. #3
    cd /proc/scsi
    and look around
    Powered by AMD & FreeBSD.
    "Documentation is like sex:
    when it is good, it is very, very good;
    and when it is bad, it is better than nothing."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •