Hello,

I have a growing pile of old hardware sitting in my office, and I'd like to get it cleaned out. I'm accepting best offers on all of the equipment below.

SERVERS

Server #1: Dell Poweredge 1950 II
-Single Intel E5310 (1.6GHz)
-16GB RAM (8x 2GB PC2-5300F)
-DRAC (IPMI)
-Redundant Power Supplies
-PERC 5/i (HW RAID)
-2x 500GB 7.2K SATA 3.5" Disks
-DVD ROM
-Rails

Server #2: Dell Poweredge 1950 II
-Dual Intel L5320 (1.86GHz)
-12GB RAM (4x 2GB PC2-5300F + 4x 1GB PC2-5300F)
-DRAC (IPMI)
-Redundant Power Supplies
-SAS 5/i (SW RAID)
-4x 2.5" Disks Blanks
-DVD ROM / CD-RW
-Rails

Server #3: Dell Poweredge 1950 II
-Dual Intel L5320 (1.86GHz)
-32GB RAM (8x 4GB PC2-5300F)
-DRAC (IPMI)
-Redundant Power Supplies
-PERC 6/i (HW RAID)
-4x 72GB 10K SAS 2.5" Disks
-DVD ROM / CD-RW
-Rails

Server #4: Dell Poweredge 860 II
-Single Intel Core2Duo 6420 (1.86GHz)
-8GB RAM (4x 2GB PC2-6400)
-DRAC (IPMI)
-Single Power Supplies
-SAS 5/i (SW RAID)
-2x 80GB 7.2K SATA 3.5" Disks
-DVD ROM / CD-RW
-Rails

STORAGE

4x WD RE3 500GB 7.2K SATA (WD5002ABYS)

1x Qlogic SB5200
-8 Active 2Gbps FC ports with 850nm optics
-Another 8 ports are available for use upon purchase of a license, from any Qlogic distributor.

1x HP/3PAR Branded "F Series" Drive Cage/Shelf
-3U
-Holds 16 3.5" Disks
-Rails Missing
-Drive trays & interposers not included
-Redundant Power Supplies
-Redundant Fibre Channel controllers included
-Looks like the one here: http://www.ebay.com/itm/200929988527
-Note: This will not function as a stand-alone RAID system. You *MUST* use this with a HP/3PAR management controller.

POWER

1x APC AP7901
-1U
-20A 120V
-8x NEMA 5-20R
-1x NEMA L5-20P
-Switched

1x Tripp Lite PDUMH20ATNET
-1U
-20A 120V
-16x NEMA 5-20R
-Built-in ATS
-Switched

Terms:
All hard drives have been wiped using the standard DoD 35 Pass secure erase, triggered by ATA Security.

All Equipment tests good, and was removed from a working production environment sometime in the past 12 months.

I will guarantee all equipment non-DOA. After that, it's up to you.

Shipping:
I will ship via FedEx or UPS Ground. Buyer is responsible for actual shipping costs.

Buyer can supply their own FedEx or UPS waybill. (Shipping from ZIP 19104)

If buyer is local to Philadelphia, equipment can be picked up anytime at 3701 Market Street, 5th Floor, Philadelphia PA 19104.

Thanks for looking!