Hello,

i have a server , and it get down when i make a reboot to the server ,

before the reboot , i was installing Hypervm to make vpss .

and i did this command :

1-
cd /etcyum.repos.d

2-
wget http://download.openvz.org/openvz.repo

3-
rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ


4-
yum install ovzkernel

5-
then i add this line to /etc/modprobe.conf
options ip_conntrack ip_conntrack_enable_ve0=1



6-
and i add this lines to /etc/sysctl.conf
# On Hardware Node we generally need
# packet forwarding enabled and proxy arp disabled
net.ipv4.ip_forward = 1
net.ipv6.conf.default.forwarding = 1
net.ipv6.conf.all.forwarding = 1
net.ipv4.conf.default.proxy_arp = 0

# Enables source route verification
net.ipv4.conf.all.rp_filter = 1

# Enables the magic-sysrq key
kernel.sysrq = 1

# We do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0

#net.ipv4.ip_conntrack_max=32760


and after reboot , the server did not relod and get down , and i contacted with the datacnter and they give me a remote console to the server , but i dont know how to use it !!

the qouestin is there any error in the command which i did ?

Regards.