Results 1 to 13 of 13
  1. #1
    Join Date
    May 2004
    Corona, CA USA

    Having Trouble Getting Apache to Use PHP 5.2.x

    I'm working on setting up a new server I just acquired with CentOS 5.5 and Webmin/Virtualmin.

    The default setup included PHP version 5.1.6 and Apache 2.2.x but several software packages I want to use require 5.2.6+.

    I managed in my sexagenarian feebleness to download and compile PHP 5.2.17 and now when I type php -v in a shell it shows

    PHP 5.2.17 (cli) (built: Mar 17 2011 19:27:01) 
    Copyright (c) 1997-2010 The PHP Group
    Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies
    Of course I restarted Apache.

    However Apache is still using 5.1.6. I know that Apache can be configured to use a module or a something else (wrapper?) to run PHP, I do not know how to tell if it is one or the other, or how to change that, or how to get Apache to use 5.2.17.

    Can somebody help please?
    Skeptic Hosting
    Promoting a reality-based lifestyle choice
    Hosting by invitation only, nothing for sale

  2. #2
    Join Date
    Nov 2010
    Could you please paste your httpd.conf file?

  3. #3
    Join Date
    May 2004
    Corona, CA USA
    I removed some virtual host details from the end of the file for brevity, here is the rest, thanks!
    this is /etc/httpd/conf/httpd.conf

    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:> for detailed information.
    # In particular, see
    # <URL:>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/etc/httpd" will be interpreted by the
    # server as "/etc/httpd/logs/foo.log".

    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.

    # Don't give away too much information about all the subcomponents
    # we are running. Comment out this line if you don't mind remote sites
    # finding out what major optional modules you are running
    ServerTokens ProductOnly

    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:>);
    # you will save yourself a lot of trouble.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "/etc/httpd"

    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile run/

    # Timeout: The number of seconds before receives and sends time out.
    Timeout 120

    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On

    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 200

    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15

    ## Server-Pool Size Regulation (MPM specific)

    # prefork MPM
    # StartServers: number of server processes to start
    # MinSpareServers: minimum number of server processes which are kept spare
    # MaxSpareServers: maximum number of server processes which are kept spare
    # ServerLimit: maximum value for MaxClients for the lifetime of the server
    # MaxClients: maximum number of server processes allowed to start
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule prefork.c>
    StartServers 10
    MinSpareServers 6
    MaxSpareServers 25
    ServerLimit 400
    MaxClients 400
    MaxRequestsPerChild 4000

    # worker MPM
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule worker.c>
    StartServers 2
    MaxClients 150
    MinSpareThreads 25
    MaxSpareThreads 75
    ThreadsPerChild 25
    MaxRequestsPerChild 0

    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses (
    Listen 80

    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/
    LoadModule auth_basic_module modules/
    LoadModule auth_digest_module modules/
    LoadModule authn_file_module modules/
    LoadModule authn_alias_module modules/
    LoadModule authn_anon_module modules/
    LoadModule authn_dbm_module modules/
    LoadModule authn_default_module modules/
    LoadModule authz_host_module modules/
    LoadModule authz_user_module modules/
    LoadModule authz_owner_module modules/
    LoadModule authz_groupfile_module modules/
    LoadModule authz_dbm_module modules/
    LoadModule authz_default_module modules/
    LoadModule ldap_module modules/
    LoadModule authnz_ldap_module modules/
    LoadModule include_module modules/
    LoadModule log_config_module modules/
    LoadModule logio_module modules/
    LoadModule env_module modules/
    LoadModule ext_filter_module modules/
    LoadModule mime_magic_module modules/
    LoadModule expires_module modules/
    LoadModule deflate_module modules/
    LoadModule headers_module modules/
    LoadModule usertrack_module modules/
    LoadModule setenvif_module modules/
    LoadModule mime_module modules/
    LoadModule dav_module modules/
    LoadModule status_module modules/
    LoadModule autoindex_module modules/
    LoadModule info_module modules/
    LoadModule dav_fs_module modules/
    LoadModule vhost_alias_module modules/
    LoadModule negotiation_module modules/
    LoadModule dir_module modules/
    LoadModule actions_module modules/
    LoadModule speling_module modules/
    LoadModule userdir_module modules/
    LoadModule alias_module modules/
    LoadModule rewrite_module modules/
    LoadModule proxy_module modules/
    LoadModule proxy_balancer_module modules/
    LoadModule proxy_ftp_module modules/
    LoadModule proxy_http_module modules/
    LoadModule proxy_connect_module modules/
    LoadModule cache_module modules/
    LoadModule suexec_module modules/
    LoadModule disk_cache_module modules/
    LoadModule file_cache_module modules/
    LoadModule mem_cache_module modules/
    LoadModule cgi_module modules/
    LoadModule version_module modules/

    # The following modules are not loaded by default:
    #LoadModule cern_meta_module modules/
    #LoadModule asis_module modules/

    # Load config files from the config directory "/etc/httpd/conf.d".
    Include conf.d/*.conf

    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #ExtendedStatus On

    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group #-1 on these systems!
    User apache
    Group apache

    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.

    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]

    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If this is not set to valid DNS name for your host, server-generated
    # redirections will not work. See also the UseCanonicalName directive.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address anyway, and this will make
    # redirections work in a sensible way.

    # UseCanonicalName: Determines how Apache constructs self-referencing
    # URLs and the SERVER_NAME and SERVER_PORT variables.
    # When set "Off", Apache will use the Hostname and Port supplied
    # by the client. When set "On", Apache will use the value of the
    # ServerName directive.
    UseCanonicalName Off

    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/var/www/html"

    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None

    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.

    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/var/www/html">

    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # for more information.
    Options Indexes FollowSymLinks

    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None

    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all


    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received.
    # The path to the end user account 'public_html' directory must be
    # accessible to the webserver userid. This usually means that ~userid
    # must have permissions of 711, ~userid/public_html must have permissions
    # of 755, and documents contained therein must be world-readable.
    # Otherwise, the client will only receive a "403 Forbidden" message.
    # See also:
    <IfModule mod_userdir.c>
    # UserDir is disabled by default since it can confirm the presence
    # of a username on the system (depending on home directory
    # permissions).
    UserDir disable

    # To enable requests to /~user/ to serve the user's public_html
    # directory, remove the "UserDir disable" line above, and uncomment
    # the following line instead:
    #UserDir public_html


    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>

    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    # The index.html.var file (a type-map) is used to deliver content-
    # negotiated documents. The MultiViews Option can be used for the
    # same purpose, but it is much slower.
    DirectoryIndex index.html index.html.var

    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives. See also the AllowOverride
    # directive.
    AccessFileName .htaccess

    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all

    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    TypesConfig /etc/mime.types

    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain

    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    <IfModule mod_mime_magic.c>
    # MIMEMagicFile /usr/share/magic.mime
    MIMEMagicFile conf/magic

    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., (on) or (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off

    # EnableMMAP: Control whether memory-mapping is used to deliver
    # files (assuming that the underlying OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. On some systems, turning it off (regardless of
    # filesystem) can improve performance; for details, please see
    #EnableMMAP off

    # EnableSendfile: Control whether the sendfile kernel support is
    # used to deliver files (assuming that the OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. Please see
    #EnableSendfile off

    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog logs/error_log

    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn

    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent

    # "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
    # requires the mod_logio module to be loaded.
    #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #CustomLog logs/access_log common

    # If you would like to have separate agent and referer logfiles, uncomment
    # the following directives.
    #CustomLog logs/referer_log referer
    #CustomLog logs/agent_log agent

    # For a single logfile with access, agent, and referer information
    # (Combined Logfile Format), use the following directive:
    CustomLog logs/access_log combined

    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (internal error documents, FTP directory
    # listings, mod_status and mod_info output etc., but not CGI generated
    # documents or custom error documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On

    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    # We include the /icons/ alias for FancyIndexed directory listings. If you
    # do not use FancyIndexing, you may comment this out.
    Alias /icons/ "/var/www/icons/"

    <Directory "/var/www/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all

    # WebDAV module configuration section.
    <IfModule mod_dav_fs.c>
    # Location of the WebDAV lock database.
    DAVLockDB /var/lib/dav/lockdb

    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

    # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all

    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Example:
    # Redirect permanent /foo

    # Directives controlling the display of server-generated directory listings.

    # IndexOptions: Controls the appearance of server-generated directory
    # listings.
    IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable

    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif

    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz

    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html

    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

    # DefaultLanguage and AddLanguage allows you to specify the language of
    # a document. You can then use content negotiation to give a browser a
    # file in a language the user can understand.
    # Specify a default language. This means that all data
    # going out without a specific language tag (see below) will
    # be marked with this one. You probably do NOT want to set
    # this unless you are sure it is correct for all cases.
    # * It is generally better to not mark a page as
    # * being a certain language than marking it with the wrong
    # * language!
    # DefaultLanguage nl
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in some cases
    # the two character 'Language' abbreviation is not identical to
    # the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. There is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
    # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
    # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
    # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
    # Norwegian (no) - Polish (pl) - Portugese (pt)
    # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
    # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
    AddLanguage ca .ca
    AddLanguage cs .cz .cs
    AddLanguage da .dk
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage en .en
    AddLanguage eo .eo
    AddLanguage es .es
    AddLanguage et .et
    AddLanguage fr .fr
    AddLanguage he .he
    AddLanguage hr .hr
    AddLanguage it .it
    AddLanguage ja .ja
    AddLanguage ko .ko
    AddLanguage ltz .ltz
    AddLanguage nl .nl
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddLanguage pt .pt
    AddLanguage pt-BR .pt-br
    AddLanguage ru .ru
    AddLanguage sv .sv
    AddLanguage zh-CN .zh-cn
    AddLanguage zh-TW .zh-tw

    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

    # ForceLanguagePriority allows you to serve a result page rather than
    # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
    # [in case no accepted languages matched the available variants]
    ForceLanguagePriority Prefer Fallback

    # Specify a default charset for all content served; this enables
    # interpretation of all content as UTF-8 by default. To use the
    # default browser choice (ISO-8859-1), or to allow the META tags
    # in HTML content to override this choice, comment out this
    # directive:
    AddDefaultCharset UTF-8

    # AddType allows you to add to or override the MIME configuration
    # file mime.types for specific file types.
    #AddType application/x-tar .tgz

    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz

    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For type maps (negotiated resources):
    # (This is enabled by default to allow the Apache "It Worked" page
    # to be distributed in multiple languages.)
    AddHandler type-map var

    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml

    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location

    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/"
    #ErrorDocument 402

    # Putting this all together, we can internationalize error responses.
    # We use Alias to redirect any /error/HTTP_<error>.html.var response to
    # our collection of by-error message multi-language collections. We use
    # includes to substitute the appropriate text.
    # You can modify the messages' appearance without changing any of the
    # default HTTP_<error>.html.var files by adding the line:
    # Alias /error/include/ "/your/include/path/"
    # which allows you to create your own set of files by starting with the
    # /var/www/error/include/ files and
    # copying them to /your/include/path/, even on a per-VirtualHost basis.

    Alias /error/ "/var/www/error/"

    <IfModule mod_negotiation.c>
    <IfModule mod_include.c>
    <Directory "/var/www/error">
    AllowOverride None
    Options IncludesNoExec
    AddOutputFilter Includes html
    AddHandler type-map var
    Order allow,deny
    Allow from all
    LanguagePriority en es de fr
    ForceLanguagePriority Prefer Fallback

    # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    # ErrorDocument 410 /error/HTTP_GONE.html.var
    # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
    # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var


    # The following directives modify normal HTTP response behavior to
    # handle known problems with browser implementations.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0

    # The following directive disables redirects on non-GET requests for
    # a directory that does not include the trailing slash. This fixes a
    # problem with Microsoft WebFolders which does not appropriately handle
    # redirects for folders with DAV methods.
    # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
    BrowserMatch "MS FrontPage" redirect-carefully
    BrowserMatch "^WebDrive" redirect-carefully
    BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
    BrowserMatch "^gnome-vfs/1.0" redirect-carefully
    BrowserMatch "^XML Spy" redirect-carefully
    BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
    NameVirtualHost [IP Redacted]:80

    # Allow server status reports generated by mod_status,
    # with the URL of http://servername/server-status
    # Change the "" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from

    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the "" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from

    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    #ProxyRequests On
    #<Proxy *>
    # Order deny,allow
    # Deny from all
    # Allow from

    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #ProxyVia On

    # To enable a cache of proxied content, uncomment the following lines.
    # See for more details.
    #<IfModule mod_disk_cache.c>
    # CacheEnable disk /
    # CacheRoot "/var/cache/mod_proxy"

    # End of proxy directives.

    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at
    # <URL:>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.

    # Use name-based virtual hosting.
    #NameVirtualHost *:80
    # NOTE: NameVirtualHost cannot be used without a port specifier
    # (e.g. :80) if mod_ssl is being used, due to the nature of the
    # SSL protocol.

    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *:80>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/
    # ServerName
    # ErrorLog logs/
    # CustomLog logs/ common
    Last edited by srider; 03-18-2011 at 12:48 PM. Reason: remove IP address
    Skeptic Hosting
    Promoting a reality-based lifestyle choice
    Hosting by invitation only, nothing for sale

  4. #4
    Join Date
    Nov 2010
    What does phpinfo() show?

    echo "<?php phpinfo(); ?>" | php > phpinfo.txt

    then open phpinfo.txt or just cat it.

  5. #5
    Join Date
    May 2004
    Corona, CA USA
    PHP Version => 5.2.17

    System => Linux [REDACTED].com 2.6.18-194.32.1.el5 #1 SMP Wed Jan 5 17:52:25 EST 2011 x86_64
    Build Date => Mar 17 2011 19:26:14
    Configure Command => './configure'
    Server API => Command Line Interface
    Virtual Directory Support => disabled
    Configuration File (php.ini) Path => /usr/local/lib
    Loaded Configuration File => (none)
    Scan this dir for additional .ini files => (none)
    additional .ini files parsed => (none)
    PHP API => 20041225
    PHP Extension => 20060613
    Zend Extension => 220060519
    Debug Build => no
    Thread Safety => disabled
    Zend Memory Manager => enabled
    IPv6 Support => enabled
    Registered PHP Streams => php, file, data, http, ftp
    Registered Stream Socket Transports => tcp, udp, unix, udg
    Registered Stream Filters => convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed

    This program makes use of the Zend Scripting Language Engine:
    Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies



    PHP Core

    Directive => Local Value => Master Value
    allow_call_time_pass_reference => On => On
    allow_url_fopen => On => On
    allow_url_include => Off => Off
    always_populate_raw_post_data => Off => Off
    arg_separator.input => & => &
    arg_separator.output => & => &
    asp_tags => Off => Off
    auto_append_file => no value => no value
    auto_globals_jit => On => On
    auto_prepend_file => no value => no value
    browscap => no value => no value
    default_charset => no value => no value
    default_mimetype => text/html => text/html
    define_syslog_variables => Off => Off
    disable_classes => no value => no value
    disable_functions => no value => no value
    display_errors => STDOUT => STDOUT
    display_startup_errors => Off => Off
    doc_root => no value => no value
    docref_ext => no value => no value
    docref_root => no value => no value
    enable_dl => On => On
    error_append_string => no value => no value
    error_log => no value => no value
    error_prepend_string => no value => no value
    error_reporting => no value => no value
    expose_php => On => On
    extension_dir => /usr/local/lib/php/extensions/no-debug-non-zts-20060613 => /usr/local/lib/php/extensions/no-debug-non-zts-20060613
    file_uploads => On => On => <font style="color: #FFFFFF">#FFFFFF</font> => <font style="color: #FFFFFF">#FFFFFF</font>
    highlight.comment => <font style="color: #FF8000">#FF8000</font> => <font style="color: #FF8000">#FF8000</font>
    highlight.default => <font style="color: #0000BB">#0000BB</font> => <font style="color: #0000BB">#0000BB</font>
    highlight.html => <font style="color: #000000">#000000</font> => <font style="color: #000000">#000000</font>
    highlight.keyword => <font style="color: #007700">#007700</font> => <font style="color: #007700">#007700</font>
    highlight.string => <font style="color: #DD0000">#DD0000</font> => <font style="color: #DD0000">#DD0000</font>
    html_errors => Off => Off
    ignore_repeated_errors => Off => Off
    ignore_repeated_source => Off => Off
    ignore_user_abort => Off => Off
    implicit_flush => On => On
    include_path => .:/usr/local/lib/php => .:/usr/local/lib/php
    log_errors => Off => Off
    log_errors_max_len => 1024 => 1024
    magic_quotes_gpc => On => On
    magic_quotes_runtime => Off => Off
    magic_quotes_sybase => Off => Off
    mail.force_extra_parameters => no value => no value
    max_execution_time => 0 => 0
    max_file_uploads => 20 => 20
    max_input_nesting_level => 64 => 64
    max_input_time => -1 => -1
    memory_limit => 128M => 128M
    open_basedir => no value => no value
    output_buffering => 0 => 0
    output_handler => no value => no value
    post_max_size => 8M => 8M
    precision => 14 => 14
    realpath_cache_size => 16K => 16K
    realpath_cache_ttl => 120 => 120
    register_argc_argv => On => On
    register_globals => Off => Off
    register_long_arrays => On => On
    report_memleaks => On => On
    report_zend_debug => Off => Off
    safe_mode => Off => Off
    safe_mode_exec_dir => /usr/local/php/bin => /usr/local/php/bin
    safe_mode_gid => Off => Off
    safe_mode_include_dir => no value => no value
    sendmail_from => no value => no value
    sendmail_path => /usr/sbin/sendmail -t -i => /usr/sbin/sendmail -t -i
    serialize_precision => 100 => 100
    short_open_tag => On => On
    SMTP => localhost => localhost
    smtp_port => 25 => 25
    sql.safe_mode => Off => Off
    track_errors => Off => Off
    unserialize_callback_func => no value => no value
    upload_max_filesize => 2M => 2M
    upload_tmp_dir => no value => no value
    user_dir => no value => no value
    variables_order => EGPCS => EGPCS
    xmlrpc_error_number => 0 => 0
    xmlrpc_errors => Off => Off
    y2k_compliance => On => On
    zend.ze1_compatibility_mode => Off => Off


    ctype functions => enabled


    date/time support => enabled
    "Olson" Timezone Database Version => 2010.9
    Timezone Database => internal
    Default timezone => America/Denver

    Directive => Local Value => Master Value
    date.default_latitude => 31.7667 => 31.7667
    date.default_longitude => 35.2333 => 35.2333
    date.sunrise_zenith => 90.583333 => 90.583333
    date.sunset_zenith => 90.583333 => 90.583333
    date.timezone => no value => no value


    DOM/XML => enabled
    DOM/XML API Version => 20031129
    libxml Version => 2.6.26
    HTML Support => enabled
    XPath Support => enabled
    XPointer Support => enabled
    Schema Support => enabled
    RelaxNG Support => enabled


    Input Validation and Filtering => enabled
    Revision => $Revision: 298196 $

    Directive => Local Value => Master Value
    filter.default => unsafe_raw => unsafe_raw
    filter.default_flags => no value => no value


    hash support => enabled
    Hashing Engines => md2 md4 md5 sha1 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru gost adler32 crc32 crc32b haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5


    iconv support => enabled
    iconv implementation => glibc
    iconv library version => 2.5

    Directive => Local Value => Master Value
    iconv.input_encoding => ISO-8859-1 => ISO-8859-1
    iconv.internal_encoding => ISO-8859-1 => ISO-8859-1
    iconv.output_encoding => ISO-8859-1 => ISO-8859-1


    json support => enabled
    json version => 1.2.1


    libXML support => active
    libXML Version => 2.6.26
    libXML streams => enabled


    PCRE (Perl Compatible Regular Expressions) Support => enabled
    PCRE Library Version => 8.02 2010-03-19

    Directive => Local Value => Master Value
    pcre.backtrack_limit => 100000 => 100000
    pcre.recursion_limit => 100000 => 100000


    PDO support => enabled
    PDO drivers => sqlite, sqlite2


    PDO Driver for SQLite 3.x => enabled
    PECL Module version => (bundled) 1.0.1 $Id: pdo_sqlite.c 293036 2010-01-03 09:23:27Z sebastian $
    SQLite Library => 3.3.7


    Revision => $Revision: 293036 $


    Reflection => enabled
    Version => $Id: php_reflection.c 300129 2010-06-03 00:43:37Z felipe $


    Session Support => enabled
    Registered save handlers => files user sqlite
    Registered serializer handlers => php php_binary

    Directive => Local Value => Master Value
    session.auto_start => Off => Off
    session.bug_compat_42 => On => On
    session.bug_compat_warn => On => On
    session.cache_expire => 180 => 180
    session.cache_limiter => nocache => nocache
    session.cookie_domain => no value => no value
    session.cookie_httponly => Off => Off
    session.cookie_lifetime => 0 => 0
    session.cookie_path => / => /
    session.cookie_secure => Off => Off
    session.entropy_file => no value => no value
    session.entropy_length => 0 => 0
    session.gc_divisor => 100 => 100
    session.gc_maxlifetime => 1440 => 1440
    session.gc_probability => 1 => 1
    session.hash_bits_per_character => 4 => 4
    session.hash_function => 0 => 0 => PHPSESSID => PHPSESSID
    session.referer_check => no value => no value
    session.save_handler => files => files
    session.save_path => no value => no value
    session.serialize_handler => php => php
    session.use_cookies => On => On
    session.use_only_cookies => Off => Off
    session.use_trans_sid => 0 => 0


    Simplexml support => enabled
    Revision => $Revision: 299016 $
    Schema support => enabled


    SPL support => enabled
    Interfaces => Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
    Classes => AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilterIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RegexIterator, RuntimeException, SimpleXMLIterator, SplFileInfo, SplFileObject, SplObjectStorage, SplTempFileObject, UnderflowException, UnexpectedValueException


    SQLite support => enabled
    PECL Module version => 2.0-dev $Id: sqlite.c 298697 2010-04-28 12:10:10Z iliaa $
    SQLite Library => 2.8.17
    SQLite Encoding => iso8859

    Directive => Local Value => Master Value
    sqlite.assoc_case => 0 => 0


    Regex Library => Bundled library enabled
    Dynamic Library Support => enabled
    Path to sendmail => /usr/sbin/sendmail -t -i

    Directive => Local Value => Master Value => 1 => 1
    assert.bail => 0 => 0
    assert.callback => no value => no value
    assert.quiet_eval => 0 => 0
    assert.warning => 1 => 1
    auto_detect_line_endings => 0 => 0
    default_socket_timeout => 60 => 60
    safe_mode_allowed_env_vars => PHP_ => PHP_
    safe_mode_protected_env_vars => LD_LIBRARY_PATH => LD_LIBRARY_PATH
    url_rewriter.tags => a=href,area=href,frame=src,form=,fieldset= => a=href,area=href,frame=src,form=,fieldset=
    user_agent => no value => no value


    Tokenizer Support => enabled


    XML Support => active
    XML Namespace Support => active
    libxml2 Version => 2.6.26


    XMLReader => enabled


    XMLWriter => enabled

    Additional Modules

    Module Name


    Variable => Value
    TERM => xterm-color
    SHELL => /bin/bash
    HISTSIZE => 1000
    SSH_CLIENT => [REDACTED] 63260 22
    SSH_TTY => /dev/pts/1
    USER => root
    LS_COLORS => no=00:fi=00:di=01;34:ln=01;36:pi=40;33o=01;35:bd=40;33;01:cd=40;33;01r=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj =01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif =01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
    MAIL => /var/spool/mail/root
    PATH => /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
    INPUTRC => /etc/inputrc
    PWD => /root
    LANG => en_US.UTF-8
    SHLVL => 1
    HOME => /root
    LOGNAME => root
    LESSOPEN => |/usr/bin/ %s
    _ => /usr/local/bin/php

    PHP Variables

    Variable => Value
    _SERVER["TERM"] => xterm-color
    _SERVER["SHELL"] => /bin/bash
    _SERVER["HISTSIZE"] => 1000
    _SERVER["SSH_CLIENT"] => [REDACTED] 63260 22
    _SERVER["SSH_TTY"] => /dev/pts/1
    _SERVER["USER"] => root
    _SERVER["LS_COLORS"] => no=00:fi=00:di=01;34:ln=01;36:pi=40;33o=01;35:bd=40;33;01:cd=40;33;01r=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj =01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif =01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
    _SERVER["MAIL"] => /var/spool/mail/root
    _SERVER["PATH"] => /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
    _SERVER["INPUTRC"] => /etc/inputrc
    _SERVER["PWD"] => /root
    _SERVER["LANG"] => en_US.UTF-8
    _SERVER["SHLVL"] => 1
    _SERVER["HOME"] => /root
    _SERVER["LOGNAME"] => root
    _SERVER["LESSOPEN"] => |/usr/bin/ %s
    _SERVER["_"] => /usr/local/bin/php
    _SERVER["PHP_SELF"] => -
    _SERVER["REQUEST_TIME"] => 1300495940
    _SERVER["argv"] => Array
    [0] => -

    _SERVER["argc"] => 1
    _ENV["TERM"] => xterm-color
    _ENV["SHELL"] => /bin/bash
    _ENV["HISTSIZE"] => 1000
    _ENV["SSH_CLIENT"] => [REDACTED] 63260 22
    _ENV["SSH_TTY"] => /dev/pts/1
    _ENV["USER"] => root
    _ENV["LS_COLORS"] => no=00:fi=00:di=01;34:ln=01;36:pi=40;33o=01;35:bd=40;33;01:cd=40;33;01r=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj =01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif =01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
    _ENV["MAIL"] => /var/spool/mail/root
    _ENV["PATH"] => /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
    _ENV["INPUTRC"] => /etc/inputrc
    _ENV["PWD"] => /root
    _ENV["LANG"] => en_US.UTF-8
    _ENV["SHLVL"] => 1
    _ENV["HOME"] => /root
    _ENV["LOGNAME"] => root
    _ENV["LESSOPEN"] => |/usr/bin/ %s
    _ENV["_"] => /usr/local/bin/php

    PHP License
    This program is free software; you can redistribute it and/or modify
    it under the terms of the PHP License as published by the PHP Group
    and included in the distribution in the file: LICENSE

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of

    If you did not receive a copy of the PHP license, or have any
    questions about PHP licensing, please contact [email protected].
    Last edited by srider; 03-18-2011 at 01:00 PM. Reason: obfuscate personal details
    Skeptic Hosting
    Promoting a reality-based lifestyle choice
    Hosting by invitation only, nothing for sale

  6. #6
    Join Date
    Nov 2010
    Everything shows you are running php 5.2.17. You are running php version 5.2.17. What's the problem?

  7. #7
    Join Date
    May 2004
    Corona, CA USA
    The installer for Clip Bucket insists that I'm still running 5.1.6

    Skeptic Hosting
    Promoting a reality-based lifestyle choice
    Hosting by invitation only, nothing for sale

  8. #8
    Join Date
    May 2004
    Corona, CA USA
    In the virtual hosts section of httpd.conf for the domain complaining about PHP version I see this:

    Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI
    allow from all
    AllowOverride All
    AddHandler fcgid-script .php
    AddHandler fcgid-script .php5
    FCGIWrapper /home/username/fcgi-bin/php5.fcgi .php
    FCGIWrapper /home/username/fcgi-bin/php5.fcgi .php5
    Skeptic Hosting
    Promoting a reality-based lifestyle choice
    Hosting by invitation only, nothing for sale

  9. #9
    Join Date
    May 2004
    Corona, CA USA
    Once again, the problem is that although PHP version 5.2.17 is installed the instance of Apache that is serving files is using PHP 5.1.6

    After restarting Apache did not produce the desired result I even rebooted the server. Still Apache is using PHP 5.1.6

    That is the problem that I do not know how to address.
    Skeptic Hosting
    Promoting a reality-based lifestyle choice
    Hosting by invitation only, nothing for sale

  10. #10
    Join Date
    Nov 2010
    Instead of building and installing PHP from source, you could try using rpms instead.

  11. #11
    Join Date
    Mar 2011
    Have you checked the .htaccess files? might have some values which overrides the setting in apache configuration files

  12. #12
    Join Date
    May 2004
    Corona, CA USA
    Quote Originally Posted by asciiDigital View Post
    Instead of building and installing PHP from source, you could try using rpms instead.
    Very scary! But it worked. I used php-common-5.2.17-1.el5.vmbleed.x86_64.rpm which of course had dependencies, which of course whined about replacing files, which prompted me to use the JFDI switch (--replacefiles)

    My site now says it is using PHP 5.2.17.

    Thank you for your help
    Skeptic Hosting
    Promoting a reality-based lifestyle choice
    Hosting by invitation only, nothing for sale

  13. #13
    Join Date
    Nov 2010
    Happy to help

Similar Threads

  1. Trouble with Apache log's movement
    By crambo in forum Hosting Security and Technology
    Replies: 5
    Last Post: 09-21-2009, 08:48 AM
  2. trouble compiling apache 1.3.37 with mod_ssl
    By cywkevin in forum Hosting Security and Technology
    Replies: 3
    Last Post: 08-04-2006, 07:16 PM
  3. apache load trouble
    By lizaanddel in forum Hosting Security and Technology
    Replies: 5
    Last Post: 10-12-2005, 01:42 PM
  4. Having trouble running apache startssl
    By voxio in forum Hosting Security and Technology
    Replies: 6
    Last Post: 06-26-2004, 08:49 AM
  5. Would Apache trouble affect ping times?
    By Lancia in forum Hosting Security and Technology
    Replies: 26
    Last Post: 06-14-2004, 06:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts