Results 1 to 5 of 5
  1. #1

    Webserver crashes when starting httpd

    Hi!

    My server ran out of disk space yesterday because of mysql bin-logging. I have now cleared the logs so I have space on my disk.

    When I reboot my server it stops responding after a couple of minutes because it runs low on memory. If I stop httpd directly it seems to work fine.

    I had no problems with this before the disk became full. Any ideas what may have caused this issue?

    I use CentOS and Apache on a dedicated server from Leaseweb.

    Best Regards
    Linus

  2. #2
    Join Date
    Sep 2010
    Location
    Behind you...
    Posts
    355
    Could be a couple of things:
    - the disk is running full again
    - services cannot recreate the logfiles that you removed

    Also, check the output of "dmesg" and check /var/log/...
    file1.info :: 50GB secure cloudstorage with filemanager

  3. #3
    Quote Originally Posted by File1eu View Post
    Could be a couple of things:
    - the disk is running full again
    - services cannot recreate the logfiles that you removed

    Also, check the output of "dmesg" and check /var/log/...
    Thank you for your answer. The disk space is not running full again.

    I'm not familiar with "debugging" the dmesg. This is what it says, see anything odd?
    Code:
    Linux version 2.6.18-128.2.1.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Tue Jul 14 06:39:56 EDT 2009
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
     BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
     BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
     BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
     BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved)
     BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
     BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    1142MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f51a0
    Memory for crash kernel (0x0 to 0x0) notwithin permissible range
    disabling kdump
    Using x86 segment limits to approximate NX protection
    On node 0 totalpages: 521952
      DMA zone: 4096 pages, LIFO batch:0
      Normal zone: 225280 pages, LIFO batch:31
      HighMem zone: 292576 pages, LIFO batch:31
    DMI 2.3 present.
    Using APIC driver default
    ACPI: RSDP (v000 IntelR                                ) @ 0x000f9370
    ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e3040
    ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e30c0
    ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e79c0
    ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e7900
    ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20050624) @ 0x7f6e7a40
    ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6e7ed0
    ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:14 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 6:14 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000)
    Detected 1995.110 MHz processor.
    Built 1 zonelists.  Total pages: 521952
    Kernel command line: ro root=LABEL=/
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c0754000 soft=c0734000
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2062816k/2087808k available (2123k kernel code, 23768k reserved, 883k data, 228k init, 1170304k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3991.91 BogoMIPS (lpj=1995955)
    Security Framework v1.0.0 initialized
    SELinux:  Initializing.
    SELinux:  Starting in permissive mode
    selinux_register_security:  Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
    CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c189 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    ACPI: Core revision 20060707
    CPU0: Intel(R) Core(TM) Duo CPU      T2450  @ 2.00GHz stepping 0c
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    CPU 1 irqstacks, hard=c0755000 soft=c0735000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3989.48 BogoMIPS (lpj=1994744)
    CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
    CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c189 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM) Duo CPU      T2450  @ 2.00GHz stepping 0c
    Total of 2 processors activated (7981.39 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    sizeof(vma)=84 bytes
    sizeof(page)=32 bytes
    sizeof(inode)=340 bytes
    sizeof(dentry)=136 bytes
    sizeof(ext3inode)=492 bytes
    sizeof(buffer_head)=52 bytes
    sizeof(skbuff)=172 bytes
    migration_cost=82
    checking if image is initramfs... it is
    Freeing initrd memory: 2461k freed
    NET: Registered protocol family 16
    No dock devices found.
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    Boot video device is 0000:00:02.0
    PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 10 devices
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    pnp: 00:06: ioport range 0x400-0x4bf could not be reserved
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1c.0
      IO window: b000-bfff
      MEM window: fda00000-fdafffff
      PREFETCH window: fd700000-fd7fffff
    PCI: Bridge: 0000:00:1c.4
      IO window: d000-dfff
    debug2: channel 0: window 998679 sent adjust 49897
      MEM window: fde00000-fdefffff
      PREFETCH window: fdd00000-fddfffff
    PCI: Bridge: 0000:00:1c.5
      IO window: c000-cfff
      MEM window: fdc00000-fdcfffff
      PREFETCH window: fdb00000-fdbfffff
    PCI: Bridge: 0000:00:1e.0
      IO window: e000-efff
      MEM window: fd900000-fd9fffff
      PREFETCH window: fd800000-fd8fffff
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[C] -> GSI 18 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    ACPI: PCI Interrupt 0000:00:1c.5[D] -> GSI 19 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    audit: initializing netlink socket (disabled)
    type=2000 audit(1297095866.945:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux:  Registering netfilter hooks
    Initializing Cryptographic API
    alg: No test for crc32c (crc32c-generic)
    ksign: Installing public key data
    Loading keyring
    - Added public key 296070D98CC762AE
    - User ID: CentOS (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    Allocate Port Service[0000:00:1c.4:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.5:pcie00]
    Allocate Port Service[0000:00:1c.5:pcie02]
    Allocate Port Service[0000:00:1c.5:pcie03]
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI: Fan [FAN] (on)
    ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
    ACPI: Thermal Zone [THRM] (40 C)
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel 945GM Chipset.
    agpgart: Detected 7932K stolen memory.
    agpgart: AGP aperture is 256M @ 0xd0000000
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH7: IDE controller at PCI slot 0000:00:1f.1
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
    ICH7: chipset revision 1
    ICH7: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:pio, hdb:pio
    Probing IDE interface ide0...
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    TCP bic registered
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Time: tsc clocksource has been installed.
    ACPI: (supports S0 S1 S4 S5)
    Freeing unused kernel memory: 228k freed
    Write protecting the kernel read-only data: 397k
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 225, io mem 0xfdfff000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 10 ports detected
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000fe00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.2: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 185
    ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 185
    ata2.00: ATA-7: TOSHIBA MK1637GSX, DL030G, max UDMA/100
    ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata2.00: configured for UDMA/100
      Vendor: ATA       Model: TOSHIBA MK1637GS  Rev: DL03
      Type:   Direct-Access                      ANSI SCSI revision: 05
    SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
     sda: sda1 sda2 sda3 sda4 < sda5 >
    sd 1:0:0:0: Attached scsi disk sda
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected]
    device-mapper: dm-raid45: initialized v0.2429
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: sda2: orphan cleanup on readonly fs
    ext3_orphan_cleanup: deleting unreferenced inode 11403786
    EXT3-fs: sda2: 1 orphan inode deleted
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux:  Disabled at runtime.
    SELinux:  Unregistering netfilter hooks
    type=1404 audit(1297095891.819:2): selinux=0 auid=4294967295 ses=4294967295
    intel_rng: FWH not detected
    input: PC Speaker as /class/input/input0
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185
    e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:92:46:fc:ba
    eth0: Intel(R) PRO/1000 Network Connection
    eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 50
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    eth1: (PCI Express:2.5GB/s:Width x1) 00:1d:92:46:fc:bb
    eth1: Intel(R) PRO/1000 Network Connection
    eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
    floppy0: no floppy controllers found
    lp: driver loaded but no devices found
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on sda2, internal journal
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 4128664k swap on /dev/sda5.  Priority:-1 extents:1 across:4128664k
    IA-32 Microcode Update Driver: v1.14a <[email protected]>
    microcode: CPU1 updated from revision 0x0 to 0x54, date = 05012006 
    ip_tables: (C) 2000-2006 Netfilter Core Team
    eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
    eth0: 10/100 speed: disabling TSO
    Bluetooth: Core ver 2.10
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    eth0: no IPv6 routers present
    Best Regards
    Linus

  4. #4
    Join Date
    Sep 2010
    Location
    Behind you...
    Posts
    355
    Seems fine, can you run these commands? First one shows the harddisk space, second on the available memory.

    df -h
    free -m
    file1.info :: 50GB secure cloudstorage with filemanager

  5. #5
    Quote Originally Posted by File1eu View Post
    Seems fine, can you run these commands? First one shows the harddisk space, second on the available memory.

    df -h
    free -m
    Thank you but I think I solved it now.

    When my disk was filled up a table in my database got corrupt and I also had some _very_ big /httpd/error_log files.

    Repaired the table and cleared the log files. Let's hope it runs smooth now

    Regards
    Linus

Similar Threads

  1. Stopping httpd: [ OK ] Starting httpd: (HELP)
    By awaisuk in forum Hosting Security and Technology
    Replies: 7
    Last Post: 08-22-2009, 05:56 PM
  2. httpd crashes at night
    By kaon in forum Hosting Security and Technology
    Replies: 11
    Last Post: 10-24-2008, 04:18 PM
  3. Cpanel crashes after /hsphere/shared/apache/bin/httpd -DSSL...
    By TimmiT.nl in forum Hosting Software and Control Panels
    Replies: 7
    Last Post: 09-03-2005, 09:55 AM
  4. httpd crashes out of the blue
    By EvlRoc in forum Hosting Security and Technology
    Replies: 6
    Last Post: 08-13-2004, 01:36 AM
  5. Clients adding subdomains crashes httpd?
    By Vox Hosting in forum Hosting Software and Control Panels
    Replies: 0
    Last Post: 12-07-2003, 04:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •