Results 1 to 3 of 3
-
04-30-2005, 02:19 AM #1WHT Addict
- Join Date
- Apr 2004
- Posts
- 105
What software should I use to keep track of bandwidth usage?
I have the following scenario
Multiple webservers connected to cisco switches
Some network links connected to pc's
I have been tasked to find software that can gather bandwidth utilization statistics on all of these machines on our network.
Anybody have a nice canned solution that they can suggest?
-
04-30-2005, 09:05 AM #2WHT Addict
- Join Date
- Dec 2003
- Posts
- 134
What kind of Cisco switch do you have? If you have a semi-high end one that has the huge expansion slots, you can get something known as a "Supervisor" from Cisco. That tracks every port.
Other then that...you log in through the console of the switch and in user mode type something such as (IOS version pending):
show interface fastethernet 0/1 bandwidth
And it'll show you how much bandwidth has been used (in Bps, I believe). If you want a more precise command I can give it to you when I get to the lab on Monday, but I'll tell you right now that that probally isn't what you're looking for because it's a total count and I don't believe you can reset it..
-
04-30-2005, 02:58 PM #3Junior Guru
- Join Date
- Apr 2005
- Location
- Sweden
- Posts
- 241
I use mrtg to monitor co-location boxes on my site. Your switch needs to have its own ip-adress set up, and basic snmp support, and the workstation you run mrtg from needs access to read the snmp stuff from the switch (usually no problem)... mrtg comes with an automatic configuration tool however that can figure out mostly everything for you. Then set up mrtg to run every 5 minutes through cron and you get nice web pages with graphs of everybodys network usage based on the port they're connected to.
I even use this for billing purposes. Love it