Page 7 of 7 FirstFirst ... 4567
Results 151 to 169 of 169
  1. #151
    Join Date
    Oct 2006
    Posts
    57
    Quote Originally Posted by duskom
    Depends on amount of Memory you have installed on your server
    Are they fine for a:

    1.7 Ghz P4
    Min Ram: 384 MB
    Bandwidth: 1.5 Mbps Dedicated
    Thanks themidge for your generous Joost invite

  2. #152
    Join Date
    Apr 2005
    Location
    Montenegro
    Posts
    5
    It could be fine, but again if you have a few websites that are MySQL intensive and with a lot of visitors it could be to high. Best way is to put it like that and monitor how your server performs. If it is not too loaded, than it is OK. If you have load problems and poor MySQL performnce try to lower key_buffer and see what is happening. Generaly it could be fine.

  3. #153
    Join Date
    Jan 2006
    Location
    Cheshire, UK
    Posts
    12
    I got alot of errors with the sysctl.conf additions. Will this be a problem?

    net.ipv4.ip_forward = 0
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.lo.accept_source_route = 0
    error: 'net.ipv4.conf.eth0.accept_source_route' is an unknown key
    net.ipv4.conf.default.accept_source_route = 0
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.lo.rp_filter = 1
    error: 'net.ipv4.conf.eth0.rp_filter' is an unknown key
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.accept_redirects = 0
    net.ipv4.conf.lo.accept_redirects = 0
    error: 'net.ipv4.conf.eth0.accept_redirects' is an unknown key
    net.ipv4.conf.default.accept_redirects = 0
    net.ipv4.conf.all.log_martians = 0
    net.ipv4.conf.lo.log_martians = 0
    error: 'net.ipv4.conf.eth0.log_martians' is an unknown key
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.lo.accept_source_route = 0
    error: 'net.ipv4.conf.eth0.accept_source_route' is an unknown key
    net.ipv4.conf.default.accept_source_route = 0
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.lo.rp_filter = 1
    error: 'net.ipv4.conf.eth0.rp_filter' is an unknown key
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.accept_redirects = 0
    net.ipv4.conf.lo.accept_redirects = 0
    error: 'net.ipv4.conf.eth0.accept_redirects' is an unknown key
    net.ipv4.conf.default.accept_redirects = 0
    error: permission denied on key 'kernel.sysrq'
    error: permission denied on key 'net.ipv4.tcp_fin_timeout'
    error: permission denied on key 'net.ipv4.tcp_keepalive_time'
    error: permission denied on key 'net.ipv4.tcp_window_scaling'
    error: permission denied on key 'net.ipv4.tcp_sack'
    error: permission denied on key 'net.ipv4.tcp_timestamps'
    error: permission denied on key 'net.ipv4.tcp_syncookies'
    error: permission denied on key 'net.ipv4.icmp_echo_ignore_broadcasts'
    error: permission denied on key 'net.ipv4.icmp_ignore_bogus_error_responses'
    net.ipv4.conf.all.log_martians = 1
    error: permission denied on key 'net.ipv4.tcp_max_syn_backlog'
    error: permission denied on key 'net.ipv4.tcp_max_tw_buckets'
    error: permission denied on key 'net.ipv4.ip_local_port_range'

  4. #154
    Join Date
    Sep 2003
    Location
    Washington, USA
    Posts
    3,262
    A new section on mod_throttle will be added shortly (waiting for the adds to edit my post). I am also working on adding a section for eAccelerator to replace MMCache.
    ‹‹SHAW NETWORKS›› Simple. Professional. Reliable. Web Hosting Done Right.
    Low Cost & Award-Winning: cPanel Reseller Plans ›› 24/7/365 Live Technical Support ‹‹
    Website: www.shawnetworks.com Fast Response E-mail: sales @ shawnetworks.com
    Sick of downtime? Fed up with excuses? Drop your host! Switch to Shaw Networks.

  5. #155
    Join Date
    Apr 2004
    Location
    Australia
    Posts
    456
    Quote Originally Posted by Shaw Networks
    A new section on mod_throttle will be added shortly (waiting for the adds to edit my post). I am also working on adding a section for eAccelerator to replace MMCache.
    Oh I didn't think this thread was going to be updated so I've created a new one with updated info and how to install eAccelerator etc.. http://www.webhostingtalk.com/showthread.php?p=4329285

    Hope you don't mind, this thread really helped me back when I was first starting out, just wanted to give something back to the community

  6. #156

    Errors & Question about Turck MMCache

    We are getting the following errors after updating sysctl.conf:

    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_source_route'
    error: 'net.ipv4.conf.eth0.accept_source_route' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.all.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.rp_filter'
    error: 'net.ipv4.conf.eth0.rp_filter' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_redirects'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_redirects'
    error: 'net.ipv4.conf.eth0.accept_redirects' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_redirects'
    error: unknown error 1 setting key 'net.ipv4.conf.all.log_martians'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.log_martians'
    error: 'net.ipv4.conf.eth0.log_martians' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_source_route'
    error: 'net.ipv4.conf.eth0.accept_source_route' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.all.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.rp_filter'
    error: 'net.ipv4.conf.eth0.rp_filter' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_redirects'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_redirects'
    error: 'net.ipv4.conf.eth0.accept_redirects' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_redirects'
    error: unknown error 1 setting key 'kernel.sysrq'
    error: unknown error 1 setting key 'net.ipv4.tcp_fin_timeout'
    error: unknown error 1 setting key 'net.ipv4.tcp_keepalive_time'
    error: unknown error 1 setting key 'net.ipv4.tcp_window_scaling'
    error: unknown error 1 setting key 'net.ipv4.tcp_sack'
    error: unknown error 1 setting key 'net.ipv4.tcp_timestamps'
    error: unknown error 1 setting key 'net.ipv4.tcp_syncookies'
    error: unknown error 1 setting key 'net.ipv4.icmp_echo_ignore_broadcasts'
    error: unknown error 1 setting key 'net.ipv4.icmp_ignore_bogus_error_responses'
    error: unknown error 1 setting key 'net.ipv4.conf.all.log_martians'
    error: unknown error 1 setting key 'net.ipv4.tcp_max_syn_backlog'
    error: unknown error 1 setting key 'net.ipv4.tcp_max_tw_buckets'
    error: unknown error 1 setting key 'net.ipv4.ip_local_port_range'

    Addititonally, we installed Turck MMCache for PHP but think we will switch to eaccelerator... How do we remove Turck MMCache ?

    Thanks for your help!!!

  7. #157
    Join Date
    Apr 2004
    Location
    Australia
    Posts
    456
    Quote Originally Posted by mwep
    We are getting the following errors after updating sysctl.conf:

    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_source_route'
    error: 'net.ipv4.conf.eth0.accept_source_route' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.all.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.rp_filter'
    error: 'net.ipv4.conf.eth0.rp_filter' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_redirects'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_redirects'
    error: 'net.ipv4.conf.eth0.accept_redirects' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_redirects'
    error: unknown error 1 setting key 'net.ipv4.conf.all.log_martians'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.log_martians'
    error: 'net.ipv4.conf.eth0.log_martians' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_source_route'
    error: 'net.ipv4.conf.eth0.accept_source_route' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_source_route'
    error: unknown error 1 setting key 'net.ipv4.conf.all.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.rp_filter'
    error: 'net.ipv4.conf.eth0.rp_filter' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.rp_filter'
    error: unknown error 1 setting key 'net.ipv4.conf.all.accept_redirects'
    error: unknown error 1 setting key 'net.ipv4.conf.lo.accept_redirects'
    error: 'net.ipv4.conf.eth0.accept_redirects' is an unknown key
    error: unknown error 1 setting key 'net.ipv4.conf.default.accept_redirects'
    error: unknown error 1 setting key 'kernel.sysrq'
    error: unknown error 1 setting key 'net.ipv4.tcp_fin_timeout'
    error: unknown error 1 setting key 'net.ipv4.tcp_keepalive_time'
    error: unknown error 1 setting key 'net.ipv4.tcp_window_scaling'
    error: unknown error 1 setting key 'net.ipv4.tcp_sack'
    error: unknown error 1 setting key 'net.ipv4.tcp_timestamps'
    error: unknown error 1 setting key 'net.ipv4.tcp_syncookies'
    error: unknown error 1 setting key 'net.ipv4.icmp_echo_ignore_broadcasts'
    error: unknown error 1 setting key 'net.ipv4.icmp_ignore_bogus_error_responses'
    error: unknown error 1 setting key 'net.ipv4.conf.all.log_martians'
    error: unknown error 1 setting key 'net.ipv4.tcp_max_syn_backlog'
    error: unknown error 1 setting key 'net.ipv4.tcp_max_tw_buckets'
    error: unknown error 1 setting key 'net.ipv4.ip_local_port_range'

    Addititonally, we installed Turck MMCache for PHP but think we will switch to eaccelerator... How do we remove Turck MMCache ?

    Thanks for your help!!!
    If your on a VPS thats why your getting those errors.

  8. #158
    Yes, I am using a VPS. Does that mean I need to fix sysctl.conf or is it ok as is ? If so, what needs to be added or removed ?

    Also, how do we remove Turck MMCache for PHP so we can replace it with eAccelerator ?

    Thanks for your quick response!!!

    I just wanted to add our experience thus far with this optimzation...

    We are running a heavily modded version of Joomla, before optimization if we had 50 users online our CPU Utlization was over 10% (ouch). SQL would barf with over 50 users.

    After optimization, with 50 users our CPU Utilization is now 0.51% (wow) and this morning we had over 65 users online with no SQL problems!!!

    Thank you sooooo much for this awesome guide!
    Last edited by mwep; 01-31-2007 at 12:02 PM.

  9. #159
    Join Date
    Dec 2006
    Posts
    480
    Personally I use xcache rather then eaccelerator for caching. However, if I was to recommend which PHP accelerator to put in a guide, I would say APC as that will be shipped as an official part of PHP 6, so using it now will give you a smoother future migration path.

  10. #160
    Join Date
    Sep 2002
    Location
    Croatia
    Posts
    231
    eAccelerator don't work with PHPsuexec and for some other reasons i want PHPsuexec on my server. So what is my options to use instead of eAccelerator. is it Turck MM cache ?

    thanks

  11. #161
    Join Date
    Dec 2004
    Location
    New York, NY
    Posts
    10,710
    Quote Originally Posted by dxer
    eAccelerator don't work with PHPsuexec and for some other reasons i want PHPsuexec on my server. So what is my options to use instead of eAccelerator. is it Turck MM cache ?

    thanks
    No. eAccelerator is basically a fork of Turck MM Cache, so if eAccelerator doesn't work for you, Turck shouldn't be any better.

  12. #162
    Join Date
    Sep 2003
    Location
    Washington, USA
    Posts
    3,262
    Quote Originally Posted by layer0
    No. eAccelerator is basically a fork of Turck MM Cache, so if eAccelerator doesn't work for you, Turck shouldn't be any better.
    Very true, and I have tried to get the mods to update my tutorial with a bit on eaccelerator, but it seems that I have run over the post length limit.
    ‹‹SHAW NETWORKS›› Simple. Professional. Reliable. Web Hosting Done Right.
    Low Cost & Award-Winning: cPanel Reseller Plans ›› 24/7/365 Live Technical Support ‹‹
    Website: www.shawnetworks.com Fast Response E-mail: sales @ shawnetworks.com
    Sick of downtime? Fed up with excuses? Drop your host! Switch to Shaw Networks.

  13. Yes i agree thanks alot helped me squeeze that last bit out!!

  14. #164
    Im now moving from reseller account to an VPS and this will surely help a lot ( im planning to take it without control panel/managment ).

  15. #165
    Join Date
    May 2008
    Posts
    31
    this doesn't look like a good advise esp about sysctl.conf
    After altering sysctl.conf according to this post I am missing 50% of emails sent through website php fucntion. And subjectively overall slower performance.

  16. #166
    Thx, will come in handy

  17. #167

    * 2 errores

    Hi, people i have 2 errors,

    1. By installing Turck MMCache all goes well until the passage of "make" this command makes this error:

    Code:
    root@srv3 [~/turck-mmcache-2.4.6]# make
    
    
    /bin/sh /root/turck-mmcache-2.4.6/libtool --mode=compile gcc  -I. -I/root/turck-mmcache-2.4.6 -DPHP_ATOM_INC -I/root/turck-mmcache-2.4.6/include -I/root/turck-mmcache-2.4.6/main -I/root/turck-mmcache-2.4.6 -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -I/usr/local/include/php/ext/date/lib  -DHAVE_CONFIG_H  -g -O2   -c /root/turck-mmcache-2.4.6/mmcache.c -o mmcache.lo 
    mkdir .libs
     gcc -I. -I/root/turck-mmcache-2.4.6 -DPHP_ATOM_INC -I/root/turck-mmcache-2.4.6/include -I/root/turck-mmcache-2.4.6/main -I/root/turck-mmcache-2.4.6 -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -I/usr/local/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/turck-mmcache-2.4.6/mmcache.c  -fPIC -DPIC -o .libs/mmcache.o
    /root/turck-mmcache-2.4.6/mmcache.c:389: error: conflicting types for 'php_get_uname'
    /root/turck-mmcache-2.4.6/mmcache.c:389: note: an argument type that has a default promotion can't match an empty parameter name list declaration
    /usr/local/include/php/ext/standard/info.h:87: error: previous declaration of 'php_get_uname' was here
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'fixup_zval':
    /root/turck-mmcache-2.4.6/mmcache.c:705: error: 'empty_string' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c:705: error: (Each undeclared identifier is reported only once
    /root/turck-mmcache-2.4.6/mmcache.c:705: error: for each function it appears in.)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_string':
    /root/turck-mmcache-2.4.6/mmcache.c:1229: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_zval_ptr':
    /root/turck-mmcache-2.4.6/mmcache.c:1253: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_property_info':
    /root/turck-mmcache-2.4.6/mmcache.c:1260: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_hash_int':
    /root/turck-mmcache-2.4.6/mmcache.c:1275: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_zval':
    /root/turck-mmcache-2.4.6/mmcache.c:1293: error: 'empty_string' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c:1303: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_op_array':
    /root/turck-mmcache-2.4.6/mmcache.c:1345: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_class_entry':
    /root/turck-mmcache-2.4.6/mmcache.c:1439: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'calc_size':
    /root/turck-mmcache-2.4.6/mmcache.c:1484: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'store_string':
    /root/turck-mmcache-2.4.6/mmcache.c:1521: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'store_zval_ptr':
    /root/turck-mmcache-2.4.6/mmcache.c:1556: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'store_property_info':
    /root/turck-mmcache-2.4.6/mmcache.c:1567: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'store_hash_int':
    /root/turck-mmcache-2.4.6/mmcache.c:1587: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'store_zval':
    /root/turck-mmcache-2.4.6/mmcache.c:1652: error: 'empty_string' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c:1665: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'store_op_array':
    /root/turck-mmcache-2.4.6/mmcache.c:1709: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'store_class_entry':
    /root/turck-mmcache-2.4.6/mmcache.c:1849: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'mmcache_store_int':
    /root/turck-mmcache-2.4.6/mmcache.c:1941: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'restore_zval':
    /root/turck-mmcache-2.4.6/mmcache.c:2159: error: 'empty_string' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'mmcache_put':
    /root/turck-mmcache-2.4.6/mmcache.c:3416: error: 'align_test' undeclared (first use in this function)
    /root/turck-mmcache-2.4.6/mmcache.c: In function 'ps_create_sid_mmcache':
    /root/turck-mmcache-2.4.6/mmcache.c:4004: error: 'empty_string' undeclared (first use in this function)
    make: *** [mmcache.lo] Error 1


    (BIG ERROR)



    2. The next mistake is to modify the file "sysctl.conf" I delete everything and put everything you the full text. And at the time the command "/ sbin / sysctl-w" gives me this error:

    Code:
    root@srv3 [~]# /sbin/sysctl -p
    
    
    net.ipv4.ip_forward = 0
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.lo.accept_source_route = 0
    error: "net.ipv4.conf.eth0.accept_source_route" is an unknown key
    net.ipv4.conf.default.accept_source_route = 0
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.lo.rp_filter = 1
    error: "net.ipv4.conf.eth0.rp_filter" is an unknown key
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.accept_redirects = 0
    net.ipv4.conf.lo.accept_redirects = 0
    error: "net.ipv4.conf.eth0.accept_redirects" is an unknown key
    net.ipv4.conf.default.accept_redirects = 0
    net.ipv4.conf.all.log_martians = 0
    net.ipv4.conf.lo.log_martians = 0
    error: "net.ipv4.conf.eth0.log_martians" is an unknown key
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.lo.accept_source_route = 0
    error: "net.ipv4.conf.eth0.accept_source_route" is an unknown key
    net.ipv4.conf.default.accept_source_route = 0
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.lo.rp_filter = 1
    error: "net.ipv4.conf.eth0.rp_filter" is an unknown key
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.accept_redirects = 0
    net.ipv4.conf.lo.accept_redirects = 0
    error: "net.ipv4.conf.eth0.accept_redirects" is an unknown key
    net.ipv4.conf.default.accept_redirects = 0
    error: "Operation not permitted" setting key "kernel.sysrq"
    error: "Operation not permitted" setting key "net.ipv4.tcp_fin_timeout"
    error: "Operation not permitted" setting key "net.ipv4.tcp_keepalive_time"
    error: "Operation not permitted" setting key "net.ipv4.tcp_window_scaling"
    error: "Operation not permitted" setting key "net.ipv4.tcp_sack"
    error: "Operation not permitted" setting key "net.ipv4.tcp_timestamps"
    error: "Operation not permitted" setting key "net.ipv4.tcp_syncookies"
    error: "Operation not permitted" setting key "net.ipv4.icmp_echo_ignore_broadcasts"
    error: "Operation not permitted" setting key "net.ipv4.icmp_ignore_bogus_error_responses"
    net.ipv4.conf.all.log_martians = 1
    error: "Operation not permitted" setting key "net.ipv4.tcp_max_syn_backlog"
    error: "Operation not permitted" setting key "net.ipv4.tcp_max_tw_buckets"
    error: "Operation not permitted" setting key "net.ipv4.ip_local_port_range"

    Please helpme!!!

  18. #168
    Join Date
    Apr 2010
    Location
    Rotterdam,The Netherlands
    Posts
    9
    oh wow, that's some very bad sysctl config, no window scaling and sack turned off. What did you try to do? Slowdown your up/download speeds?

    <<snipped>>
    Last edited by bear; 04-27-2010 at 04:37 PM.

  19. #169
    Join Date
    Jan 2010
    Location
    SL
    Posts
    163
    i was wondering that if these same mysql settings can be used for a vps of following specifications?

    1.5ghz processor speed
    1gb ram
    50gb harddisk
    cpanel
    centos

Page 7 of 7 FirstFirst ... 4567

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •