Results 1 to 5 of 5
-
11-25-2010, 02:09 PM #1Junior Guru Wannabe
- Join Date
- Oct 2010
- Posts
- 56
VOiP Setup - Outgoing Ok, No Incoming
Hi,
I have setup Elastix on my own VPS. I have setup all the configuration alright as per my knowledge. I can make Outgoing calls fine but I cannot receive Incoming calls. I am using a softphone.
Let me know if anyone of you can resolve this Incoming calls issue or guide me through the process.
Looking forward.
Thanks!
-
11-25-2010, 07:32 PM #2Web Hosting Master
- Join Date
- Oct 2007
- Location
- Northampton, UK
- Posts
- 553
Some if it may depend on what provider you are using. I wrote a guide that may help - http://sysadminman.net/blog/2009/get...did-number-386
SysAdminMan - Asterisk PBX hosting - FreePBX, A2Billing and Elastix
-
12-16-2010, 01:38 PM #3WHT Addict
- Join Date
- Nov 2004
- Location
- Marietta PA
- Posts
- 138
First with out seeing your configuration I would suggest that you make sure you setup the inbound route correctly.
Next I would do a tail -f 10 /var/log/asterisk/full and watch the logs for a bit to make sure that the trunk is fully registered.
If you are running a firewall I would verify that you have the correct ports open.
At a min ports 5060 - 6000 for registration of SIP UDP
10000-20000 UDP for SIP communication. That is inbound and outbound.
Finally do a asterisk -r and place a inbound call and see if your asterisk system even sees the call and if so watch the call flow to see where it is failing.
We provide VoIP Consulting if there is still a problem.Digital Offensive
http://www.digitaloffensive.com
Take an offensive approach to Security know what your foes know!
-
01-03-2011, 07:30 AM #4WHT Addict
- Join Date
- Oct 2002
- Posts
- 121
You are behind a NAT firewall? (your home or office router) it is probably that Network Address Translation is the issue
You need to use some form of NAT Traversal, such as STUN, Mediaproxy, rtpproxy, ICE, SER/Kamailio/Opensips depending on your softphone support
Kamailio and OpenSIPS are forks of OpenSER (which is no longer developed)
They are used at production environments in conjunction with mediaproxy or rtpproxy to deal with NAT Traversal
it is also possible to use Client Side NAT Traversal solutions such as STUN and ICE (depending on your softphone support)
-
04-06-2011, 03:46 AM #5Junior Guru Wannabe
- Join Date
- Jan 2004
- Location
- Lakewood, NJ
- Posts
- 93
Just use STUN in Asterisk. Also make sure you register pretty frequent, use qualify=2000 and forward UDP ports 5060, 10000-20000 to your device.
Also look at the Asterisk logs to see if it is a config issue.
Similar Threads
-
Incoming/outgoing SMS
By serverFFS in forum VOIP etcReplies: 10Last Post: 05-31-2010, 09:32 PM -
VoIP,IVR link with incoming and outgoing lines
By kumagh in forum Hosting Security and TechnologyReplies: 9Last Post: 08-13-2009, 03:36 AM -
Looking for VOIP with Incoming Number. Incoming calls only
By TheHostingHeroes in forum VOIP etcReplies: 5Last Post: 08-18-2008, 09:58 AM -
How do I keep an archive of incoming and outgoing e-mails?
By lifegauge in forum Web HostingReplies: 10Last Post: 03-27-2005, 09:51 AM -
MRTG - Incoming > Outgoing
By M0NkEY in forum Hosting Security and TechnologyReplies: 3Last Post: 01-13-2003, 08:01 PM