Results 1 to 5 of 5
-
02-17-2014, 03:38 PM #1Newbie
- Join Date
- Feb 2014
- Posts
- 18
Fully Automated IPsec/L2TP VPN Setup with Libreswan
Hello guys, I have created a fully automated ("one-click") IPsec/L2TP VPN install script for Ubuntu 12.04. My script was inspired by and is based on the work of Thomas Sarlandie (original post), that I took time to improve by replacing Openswan with Libreswan, which is more actively developed with recent bug fixes. I also corrected a few errors in his script, added sysctl.conf and basic IPTables rules.
This script is designed for use as Amazon EC2 "user-data" when launching an instance. The fact that it can be run purely from user-data makes it ideal for use on low-priced "spot instances". With minor modifications, the script can also be used on KVM- or XEN-based VPS from other providers.
Main features:
- Fully automated IPsec/L2TP VPN install with no user interaction required
- Encapsulates all VPN traffic in UDP - no ESP protocol support is needed
- Can be directly used as the "user-data" when launching an Amazon EC2 instance
- Can be used in both EC2 Classic and VPC, with on-demand OR spot instances
- Automatically obtains public and private IP info from instance metadata
- Includes a basic IPTables firewall as well as sysctl.conf settings
- Tested on both Ubuntu 12.04 LTS 32-bit and 64-bit
Link to the script: https://gist.github.com/hwdsl2/9030462
Detailed instructions can also be found at my blog article here.
Instructions for use in Amazon EC2:
- Browse to my script at the link above.
- Click on the "< >" sign on top-right corner that says "View Raw". Ctrl-A to select all, Ctrl-C to copy. Then paste into your favorite editor. From there, be sure to replace the three variables "IPSEC_PSK", "VPN_USER" and "VPN_PASSWORD" with your own values.
- Launch an Amazon EC2 Ubuntu 12.04 instance (on-demand OR spot). Copy and paste the customized script into the "User data" field under "Advanced Details" in Step 3 (reference).
- Proceed to configure other details. When setting up the EC2 security group for your instance, remember to allow inbound UDP ports 500 and 4500 for the VPN, and TCP port 22 for SSH. Other ports are not required.
- Wait a few minutes after the instance finishes launching, and your fully configured IPsec/L2TP VPN server will be ready for you!
Instructions for use on other VPS (KVM- or XEN-based):
- Make sure to prepare your VPS with a fresh install of Ubuntu 12.04 LTS server.
- Save the script as "vpnsetup.sh" on your VPS. Edit it in your favorite editor. From there, change the first line to "#!/bin/bash", replace the three variables "IPSEC_PSK", "VPN_USER" and "VPN_PASSWORD" as mentioned above, and change "PRIVATE_IP=..." and "PUBLIC_IP=..." to the actual IP addresses of your VPS. In case your VPS is run on its public IP directly with no private IP, just use that public IP for both.
- Save and exit the editor. Finally, run "bash vpnsetup.sh" to install.
Use of the script on OpenVZ VPS is NOT recommended, as kernel support for IPsec may not be available on your host node. In addition, the IPTables rules in the script could give errors due to missing kernel modules.
Feel free to reply with your comments or suggestions.
Disclaimer: Although the script has been tested, there is NO guarantee and use at your own risk!Last edited by howardsl2; 02-17-2014 at 03:45 PM.
-
02-19-2014, 06:35 AM #2Web Hosting Master
- Join Date
- Feb 2010
- Posts
- 1,030
Nice sharing. I am new to it. Is it possible to integrate with WHMCS?
-
02-23-2014, 11:32 PM #3Newbie
- Join Date
- Feb 2014
- Posts
- 18
I am not sure about the integration with WHMCS part since I never used it before.
To add to my original post: For Windows users, a registry change may be required in order to be able to connect to an IPsec/L2TP VPN behind NAT. Please follow instructions in this article:
http://support.microsoft.com/kb/885407
Credit goes to vbap on LET.Last edited by howardsl2; 02-23-2014 at 11:38 PM.
-
03-25-2014, 12:47 PM #4Newbie
- Join Date
- Feb 2014
- Posts
- 18
Just want to make a correction to my previous post regarding IPsec/L2TP VPN behind NAT and Windows users. Someone reminded me yesterday that different registry changes are needed for XP users, and for those running later versions.
For XP users, see: http://support.microsoft.com/kb/885407
For Vista, 7, and Server 2008 users, see: http://support.microsoft.com/kb/926179
Alternative, see this article for combined instructions (scroll down to end of page).
https://kb.meraki.com/knowledge_base...ing-client-vpn
-
04-07-2014, 08:44 AM #5Newbie
- Join Date
- Mar 2014
- Posts
- 11
Thanks a lot, really usefull !
Similar Threads
-
Need someone to create a script for L2TP/IPSec VPN installation on VPS
By dmitriy2011 in forum Systems Management RequestsReplies: 6Last Post: 05-03-2013, 05:18 AM -
L2TP over IPSec VPN Tutorial
By codydh in forum VPS HostingReplies: 3Last Post: 06-26-2012, 03:46 PM -
L2TP/IPSec VPN
By Orien in forum Hosting Security and TechnologyReplies: 3Last Post: 04-09-2012, 05:33 PM -
L2TP-IPsec vpn 1 login per user?
By cosmicgate in forum Programming DiscussionReplies: 1Last Post: 01-10-2012, 02:57 PM -
Disconnect a user from L2TP/IPSec VPN without restarting
By klikli in forum Hosting Security and TechnologyReplies: 1Last Post: 10-07-2011, 03:59 PM