Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2003
    Location
    UK
    Posts
    6,616

    3Ware Hardware Raid - Which disk is failing?

    I've got a box ATM where the RAID systems are failing but I'm stuck if I can work out which disk in the RAID-1 mirror is on its way out. Going from the cli I'm getting

    3ware CLI> info c0 drivestatus
    # of ports: 2
    Port 0: WDC WD2000JB-00FUA0 WD-WMAEP2595325 186.31 GB (1749f1b0 blocks): OK(unit 0)
    Port 1: WDC WD2000JB-00FUA0 WD-WMAER1149210 186.31 GB (1749f1b0 blocks): OK(unit 0)

    3ware CLI> info c0 u0 status
    OK (0xÿ)

    3ware CLI> info c0
    Controller: c0
    -------------
    Driver: 1.02.00.037
    Model: 7006-2
    FW: FE7X 1.05.00.065
    BIOS: BE7X 1.08.00.048
    Monitor: ME7X 1.01.00.038
    Serial #: F14803A4180495
    PCB: Rev4
    PCHIP: 1.30-66
    ACHIP: 3.20


    # of units: 1
    Unit 0: RAID 1 186.31 GB ( 1749e9b0 blocks): OK

    # of ports: 2
    Port 0: WDC WD2000JB-00FUA0 WD-WMAEP2595325 186.31 GB (1749f1b0 blocks): OK(unit 0)
    Port 1: WDC WD2000JB-00FUA0 WD-WMAER1149210 186.31 GB (1749f1b0 blocks): OK(unit 0)

    i.e. no obvious problems.

    Any ideas?

    Rus
    Russ Foster - Industry Curmudgeon
    Freelance Sysadmin for Hire - email vaserv@gmail.com

  2. #2
    Join Date
    Aug 2001
    Location
    Atlanta
    Posts
    1,170
    What kind of indication are you getting that one of the drives is failing?

  3. #3
    Join Date
    Oct 2004
    Posts
    305
    Yeah, check your system logs to see if there are any nasty error messages indicating the drive's failing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •