Results 1 to 16 of 16
-
06-21-2001, 04:00 AM #1Web Hosting Guru
- Join Date
- May 2001
- Posts
- 283
Can Somebody help me with DNS please?
Hi,
First, thanks to everyone here at WHT for their great help. I have revently gotten a RaQ 4i server from rackshack.net and their service seems alright.
One of the problems I'm facing is relaying emails from my Virtual Sites. I've tried setting up the Email Parameters and allowed relaying for the domains as well as IP addresses but I still can't get it to work. The tech people at Rack Shack told me that I have to use my local ISP but they dont allow relaying either unless your email address is at their domain.
I asked one of the tech guys at Rack Shack if setting up my own DNS on my server would solve the problem ans they said that it would. So I'm off to venture into the brave world of setting DNS server on my RaQ and would greatly appreciate all the help I can get.
I have a VERY small idea of what to do and how to start. Please let me know if what I'm doing is right and how I should progress. For example, I'll use domain.com as my parent domain and virtual.com as my virtual site
1) Request Additional IPs for my RaQ server from Rack Shack- Already done- I now have 5 IP Addresses
2) Ask Rackshack to setup ns1.domain.com and ns2.domain.com as give them one of the IP addresses I've reveived (No point in giving two coz if the server is down, both the IPs wont work)
3) Umm....that's all I know! Any help from here on would be greatly appreciated!
Thanks
Abbas
-
06-21-2001, 04:11 AM #2Web Hosting Master
- Join Date
- May 2001
- Location
- Maui, HI
- Posts
- 1,239
Aloha
just so ya know some people might flame ya for not using the search
try starting here
http://www.webhostingtalk.com/showth...ht=RaQ+AND+DNS
I put some links in they might help ya out
you could also use a 3rd party dns service
do a search you will find all kinds of answersAloha, Chad
www.happyfish.com
To do a move in such a way that no one suspects let alone detects !!!
-
06-21-2001, 04:21 AM #3Web Hosting Guru
- Join Date
- May 2001
- Posts
- 283
Honu,
I tried a search but everything was in bits and peices. It would be great if we can create a step-by-step guide for all the newbies like me!
-Abbas
-
06-21-2001, 10:28 AM #4Web Hosting Master
- Join Date
- Jun 2000
- Location
- Southern California
- Posts
- 12,136
Couple of things. First, #2, as I said in another post, is flawed because you need *two* IP addresses to set this up. Doesn't matter about the same machine thing...
Second, I don't see how this would solve your problem. What you want to do is enable the ability to send outbound mail correct? Have you installed the POP Auth before SMTP script? If no, I'd try that first, as even with what you are planning to do, sending mail without it still won't work.
-
06-21-2001, 10:40 AM #5Web Hosting Guru
- Join Date
- May 2001
- Posts
- 283
Originally posted by Chicken
as even with what you are planning to do, sending mail without it still won't work.
I tried to open up relaying from the IPs from where the mail was gonna be sent but that still didn't help. Would POP before SMTP help in that case? Anybody else having the same problem?
Thanks for your constant help Chicken- I really appreciate it.
-Abbas
-
06-21-2001, 11:11 AM #6Web Hosting Master
- Join Date
- Jun 2000
- Location
- Southern California
- Posts
- 12,136
No problem... I'd try installing the POP before SMTP first before doing any of this and after that, check your mail, and try to send. There are reasons why this *still* wouldn't work. Your ISP might prevent you from relaying mail (some do), and if that is the case, then you will have to use your ISP's SMTP servers (but this is not difficult to do, some quick settings in Outlook Express and no one will be able to tell the difference).
-
06-21-2001, 04:16 PM #7Web Hosting Master
- Join Date
- May 2001
- Location
- Maui, HI
- Posts
- 1,239
Originally posted by AbbasJaffarali
Honu,
I tried a search but everything was in bits and peices. It would be great if we can create a step-by-step guide for all the newbies like me!
-Abbas
I know the links in the other post have some good info
one of my friends who was helping me test an account could not send mail out at all which may have been his isp not allowing as Chicken says
Chicken knows his way around a Raq very well it seems so def here what he says should help ya out
in your email alias settings did you put in more than just your mail
panotoools.com, mail.panotools.com, ww.panotools.com
I noticed when I first got my raq I had to do this to get mail out
as when I first got it I only put in the mail.panotools.com and not the others
the other thing to do is to get a couple accounts set up and send to a few friends and have them try it out see if they can get mail in and out
keep us postedAloha, Chad
www.happyfish.com
To do a move in such a way that no one suspects let alone detects !!!
-
06-24-2001, 03:19 AM #8Web Hosting Guru
- Join Date
- Jun 2001
- Location
- San Diego, CA
- Posts
- 283
Re: Can Somebody help me with DNS please?
Originally posted by AbbasJaffarali
Hi,
First, thanks to everyone here at WHT for their great help. I have revently gotten a RaQ 4i server from rackshack.net and their service seems alright.
One of the problems I'm facing is relaying emails from my Virtual Sites. I've tried setting up the Email Parameters and allowed relaying for the domains as well as IP addresses but I still can't get it to work. The tech people at Rack Shack told me that I have to use my local ISP but they dont allow relaying either unless your email address is at their domain.
I asked one of the tech guys at Rack Shack if setting up my own DNS on my server would solve the problem ans they said that it would. So I'm off to venture into the brave world of setting DNS server on my RaQ and would greatly appreciate all the help I can get.
I have a VERY small idea of what to do and how to start. Please let me know if what I'm doing is right and how I should progress. For example, I'll use domain.com as my parent domain and virtual.com as my virtual site
1) Request Additional IPs for my RaQ server from Rack Shack- Already done- I now have 5 IP Addresses
2) Ask Rackshack to setup ns1.domain.com and ns2.domain.com as give them one of the IP addresses I've reveived (No point in giving two coz if the server is down, both the IPs wont work)
3) Umm....that's all I know! Any help from here on would be greatly appreciated!
-daviduEveryDNS.NET :: FreeDNS and more.
-
06-24-2001, 04:20 AM #9Web Hosting Guru
- Join Date
- May 2001
- Posts
- 283
This is what I've done so far:
1) Created two sub domains called ns1.domain.com and ns2.domain.com (However, I haven't registered these domains with Rack Shack's Name Servers- Is this necessary?)
2) Assigned the IP given to me during server setup (Primary IP) to ns1.domain.com and another IP that was given to me later on for ns2.domain.com (Secondary IP)
3) Created Address "A" record for both ns1.domain.com and ns2.domain.com pointing them to the relevant IPs. Also checked the "Create Reverse" automatically so PTR was also created automatically in this step
4) Under Network Settings, changed the Primary DNS to the Primary IP and the Secondary DNS to the secondary IP- Is the IP address ok, or do I need to type "ns1.domain.com" and ns2.domain.com here.
5) Registered the name servers with Dotster as ns1.domain.com with the primary IP and ns2.domain.com as the secondary IP. It's been three days since I've done this and they still dont show up in the WHOIS at Network Solutions website. Any idea how long this procedure takes?
Thanks
Abbas
-
06-24-2001, 05:14 AM #10Web Hosting Evangelist
- Join Date
- Dec 2000
- Posts
- 542
1) Created two sub domains called ns1.domain.com and ns2.domain.com (However, I haven't registered these domains with Rack Shack's Name Servers- Is this necessary?)
3) Created Address "A" record for both ns1.domain.com and ns2.domain.com pointing them to the relevant IPs. Also checked the "Create Reverse" automatically so PTR was also created automatically in this step
-
06-24-2001, 05:27 AM #11Web Hosting Guru
- Join Date
- May 2001
- Posts
- 283
Originally posted by Donovan
Did you set up two virtual sites for your subdomains? If I am not wrong, it's necessary to do so before everything start working.
Thanks
-Abbas
-
07-05-2001, 06:36 AM #12Junior Guru
- Join Date
- May 2001
- Posts
- 185
Abbas, have you got it to work?
If yes would you be kind enough tp post the results so that others in need like me can look at the results!Thank you,
ML
-
07-05-2001, 08:36 AM #13I Squash Server Problems
- Join Date
- Apr 2001
- Location
- FL, USA
- Posts
- 949
Abbass
I too have a machine at rackshack.net and have no problems with email. I installed the POP before AUTH package. I use rackshacks DNS. Make sure you have the DNS configured properly and the email aliases setup properly as well.
A major newbie mistake is not putting domain.com into the email alias field. Be default (at rackshack at least), your email address is user@www.domain.com. Trying to send mail to user@domain.com will not work. Make sure your email aliases are set to include domain.com and that the DNS points to your server for these domains.
If this still does not work, put your local machines IP address into the relay field and try again. I have seen some set ups that still do not relay mail with POP before SMTP installed.
(P.S. This info is for a Raq4i).
We save you time, money, and frustration by handling the server management tasks required to run an online business successfully.
No prodding required. We just do it right the first time. Red Hat, MySQL, Plesk, and cPanel certified staff.
-
07-05-2001, 12:36 PM #14Junior Guru
- Join Date
- May 2001
- Posts
- 185
Make sure you have the DNS configured properly
and the email aliases setup properly as well.
What is the proper DNS for the SMTP server?
If this still does not work, put your local machines IP address into the relay field and try again. I have seen some set ups that still do not relay mail with POP before SMTP installed.
I have a Raq3 with POP before SMTP installed and it still does not work. I travel all over the world and need to use my server's SMTP. Lookings for IP's all over the place makes it very inconviniente. Do I also need reverse DNS for it to work with POP before SMTP ?Thank you,
ML
-
07-05-2001, 12:58 PM #15I Squash Server Problems
- Join Date
- Apr 2001
- Location
- FL, USA
- Posts
- 949
DNS Setup
Make sure both domain.com and www.domain.com point to your server's IP address.
Also make sure you have entered domain.com in the email alias section of the control panel. (I am assuming Raq 3's support this option).
Using your IP
Using your IP is just for testing. Afterwards, you can open up the relay to other areas using wildcards, e.g. *.com to allow all .com's.
You should take a look at your maillogs for any details or error codes -- perhaps post a snippet of a denied session here -- maybe somebody can help.
We save you time, money, and frustration by handling the server management tasks required to run an online business successfully.
No prodding required. We just do it right the first time. Red Hat, MySQL, Plesk, and cPanel certified staff.
-
07-05-2001, 02:02 PM #16Junior Guru
- Join Date
- May 2001
- Posts
- 185
POP before SMTP
This is exactly what POP before SMTP does -- it allows you to relay
through your own server IF you remember to actually POP mail on the server before trying to send something?
That's what I was doing wrong for the last few days......finallyThank you,
ML