Results 1 to 10 of 10
-
12-04-2010, 05:57 AM #1Junior Guru
- Join Date
- Apr 2006
- Posts
- 185
[URGENT] need someone to configure my server for IPv6
I've just got some portable IPv6 from 100tb.com and I've zero idea how to use them and setup. If you're VERY good with this, kindly PM me your MSN.
This is a paid request. Thx
-
12-04-2010, 06:06 AM #2VPS Like a Boss!
- Join Date
- Jul 2009
- Location
- New Zealand
- Posts
- 2,331
have you checked this? http://www.cyberciti.biz/faq/rhel-re...configuration/
QuickWeb™ -We Host Servers Like a Boss!
New Zealand - USA - UK - Germany Virtual Servers
Worldwide hosting provider with proven 24x7 and 25-Minute Support!
www.quickweb.co.nz
-
12-04-2010, 06:09 AM #3Junior Guru
- Join Date
- Apr 2006
- Posts
- 185
Yes. But I'm afarid i would do something wrongly and mess up the server This is what 100TB told me which I don't understand at all
The requested public portable IP addresses have been assigned and routed.
The assigned subnet '2607:f0d0:1003:0066:0000:0000:0000:0000/64' has a usable IP address range of: 2607:f0d0:1003:0066:0000:0000:0000:2 - 2607:f0d0:1003:0066:ffff:ffff:ffff:fffe
Detailed subnet information may be found below:
IP addresses in subnet 2607:f0d0:1003:0066:0000:0000:0000:0000/64
2607:f0d0:1003:0066:0000:0000:0000:0000 Network address
2607:f0d0:1003:0066:0000:0000:0000:0001 Gateway address
2607:f0d0:1003:0066:0000:0000:0000:0002
-
12-04-2010, 06:29 AM #4WHT Addict
- Join Date
- Feb 2007
- Posts
- 148
Hello,
Shouldn't be a problem.I sent you a PM!
Regards,Andrew Nemeth - Steady Communications LLC.
Linux/Windows VPS Hosting, Web Design
West Coast Datacenter - Los Angeles, California
-
12-04-2010, 08:26 AM #5VPS Like a Boss!
- Join Date
- Jul 2009
- Location
- New Zealand
- Posts
- 2,331
just edit your eth1 like in the link i have given and then make this your IP 2607:f0d0:1003:0066:0000:0000:0000:2 the 2607:f0d0:1003:0066:0000:0000:0000:1 is the gateway.
QuickWeb™ -We Host Servers Like a Boss!
New Zealand - USA - UK - Germany Virtual Servers
Worldwide hosting provider with proven 24x7 and 25-Minute Support!
www.quickweb.co.nz
-
12-04-2010, 08:30 AM #6Junior Guru
- Join Date
- Apr 2006
- Posts
- 185
I created a new eth1:12 (like what i did for all my new xx.xx.xx.xx IP)
DEVICE=eth1:12
BOOTPROTO=static
ONBOOT=yes
HWADDR=00:30:48:d9:da:b9
IPADDR=2607:f0d0:1003:0066:0000:0000:0000:2
NETMASK=2607:f0d0:1003:0066:0000:0000:0000:0000
GATEWAY2607:f0d0:1003:0066:0000:0000:0000:0001
But it didn't work (I tried pinging it)
-
12-04-2010, 09:02 AM #7Linux Guru
- Join Date
- Mar 2004
- Location
- Odessa, Ukraine
- Posts
- 610
Did you enabled ipv6 in network config?
-
12-04-2010, 09:36 AM #8Junior Guru
- Join Date
- Apr 2006
- Posts
- 185
This is what did for me
[root@host357690 ~]# ifconfig
eth1 Link encap:Ethernet HWaddr 00:30:489A:B9
inet addr:174.36.75.42 Bcast:174.36.75.63 Mask:255.255.255.224
inet6 addr: 2607:f0d0:1003:66:230:48ff:fed9:dab9/64 Scope:Global
inet6 addr: 2607:f0d0:1003:34:230:48ff:fed9:dab9/64 Scope:Global
inet6 addr: 2607:f0d0:1003:20:230:48ff:fed9:dab9/64 Scope:Global
inet6 addr: fe80::230:48ff:fed9:dab9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:389025697 errors:0 dropped:485 overruns:0 frame:0
TX packets:312536533 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:375954534354 (350.1 GiB) TX bytes:363922430227 (338.9 GiB)
Memory:e8100000-e8120000
[root@host357690 ~]# ping6 2607:f0d0:1003:66:230:48ff:fed9:dab9
PING 2607:f0d0:1003:66:230:48ff:fed9:dab9(2607:f0d0:1003:66:230:48ff:fed9:dab9) 56 data bytes
64 bytes from 2607:f0d0:1003:66:230:48ff:fed9:dab9: icmp_seq=0 ttl=64 time=0.021 ms
64 bytes from 2607:f0d0:1003:66:230:48ff:fed9:dab9: icmp_seq=1 ttl=64 time=0.029 ms
64 bytes from 2607:f0d0:1003:66:230:48ff:fed9:dab9: icmp_seq=2 ttl=64 time=0.027 ms
64 bytes from 2607:f0d0:1003:66:230:48ff:fed9:dab9: icmp_seq=3 ttl=64 time=0.028 ms
64 bytes from 2607:f0d0:1003:66:230:48ff:fed9:dab9: icmp_seq=4 ttl=64 time=0.028 ms
--- 2607:f0d0:1003:66:230:48ff:fed9:dab9 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.021/0.026/0.029/0.006 ms, pipe 2
============================================================
But now, how can i use 2607:f0d0:1003:0066:0000:0000:0000:2?
[root@host357690 ~]# ping6 2607:f0d0:1003:0066:0000:0000:0000:2
PING 2607:f0d0:1003:0066:0000:0000:0000:2(2607:f0d0:1003:66::2) 56 data bytes
From 2607:f0d0:1003:66:230:48ff:fed9:dab9 icmp_seq=0 Destination unreachable: Address unreachable
-
12-04-2010, 09:25 PM #9Junior Guru
- Join Date
- May 2009
- Location
- Hong Kong
- Posts
- 207
Follow this link: http://knowledgelayer.softlayer.com/...CentOS+systems.
And I meet a new problem here: http://www.webhostingtalk.com/showthread.php?t=1003287
Can you PM me your MSN and let's discuss it?
-
12-04-2010, 10:27 PM #10VPS Like a Boss!
- Join Date
- Jul 2009
- Location
- New Zealand
- Posts
- 2,331
QuickWeb™ -We Host Servers Like a Boss!
New Zealand - USA - UK - Germany Virtual Servers
Worldwide hosting provider with proven 24x7 and 25-Minute Support!
www.quickweb.co.nz
Similar Threads
-
encouraging ipv6 adoption by having ipv6 only hour for important sites
By kmching2 in forum Hosting Security and TechnologyReplies: 3Last Post: 05-12-2010, 08:12 PM -
[URGENT] Configure Dot Net Panel
By igrowyourbiz in forum Systems Management RequestsReplies: 2Last Post: 09-25-2009, 11:09 AM -
Good IPV6 brokers? Hosts that supply IPV6 IPs?
By DeltaAnime in forum Dedicated ServerReplies: 2Last Post: 03-19-2005, 06:05 PM -
URGENT - Configure Urchin to work with log rotating
By FrzzMan in forum Hosting Security and TechnologyReplies: 0Last Post: 12-26-2003, 05:46 PM -
urgent: how to configure apache to do this
By realalien in forum Hosting Security and TechnologyReplies: 16Last Post: 10-17-2002, 02:52 AM