clocker1996
11-01-2002, 06:36 PM
Hi,
I have several XP 1900+ servers at rackshack. I realize they aren't selling them anymore, but I believe they are all the same hardware and etc.
They are currently running default kernels. I wanted to compile 2.4.19 with only what's needed. As in, i want to make the kernel really small. Smallest I can go.
I've asked RackShack to tell me what motherboard the server is using, but they havent responded yet, and frankly i dont think they will give me a real answer i can work with.
So I was wondering if anyone on here could help me maybe pin point, or figure it out?
I hear if you konw certain pieces of info, you might be able to figure out waht mobo it is..?
I'm not good with kernels (i would have a friend do it for me)
but here is some info
sun:/proc# cat ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
bc00-bc7f : Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D
d400-d4ff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
d400-d4ff : sis900
d800-d8ff : Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator
ff00-ff0f : Silicon Integrated Systems [SiS] 5513 [IDE]
ff00-ff07 : ide0
ff08-ff0f : ide1
sun:/proc# cat pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 2).
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=16.
I/O at 0xff00 [0xff0f].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).
Bus 0, device 1, function 1:
Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 130).
IRQ 12.
Master Capable. Latency=64. Min Gnt=52.Max Lat=11.
I/O at 0xd400 [0xd4ff].
Non-prefetchable 32 bit memory at 0xcfff7000 [0xcfff7fff].
Bus 0, device 1, function 3:
USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).
IRQ 5.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xcfffd000 [0xcfffdfff].
Bus 0, device 1, function 2:
USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).
IRQ 5.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xcfffc000 [0xcfffcfff].
Bus 0, device 1, function 4:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 2).
IRQ 11.
Master Capable. Latency=64. Min Gnt=2.Max Lat=24.
I/O at 0xd800 [0xd8ff].
Non-prefetchable 32 bit memory at 0xcfffe000 [0xcfffefff].
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. No bursts. Min Gnt=14.
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 49).
Prefetchable 32 bit memory at 0xc0000000 [0xc7ffffff].
Non-prefetchable 32 bit memory at 0xcfee0000 [0xcfefffff].
I/O at 0xbc00 [0xbc7f].
sun:/proc# cat /var/log/dmesg
Linux version 2.4.9-31 (bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Tue Feb 26 07:11:02 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003eff0000 (usable)
BIOS-e820: 000000003eff0000 - 000000003eff8000 (ACPI data)
BIOS-e820: 000000003eff8000 - 000000003f000000 (ACPI NVS)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
111MB HIGHMEM available.
On node 0 totalpages: 258032
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 28656 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.9-31
Initializing CPU#0
Detected 1592.903 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3178.49 BogoMIPS
Memory: 1010844k/1032128k available (1725k kernel code, 20004k reserved, 91k data, 224k init, 114624k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: queued sectors max/low 670960kB/539888kB, 1984 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS730
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST360021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 321k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 224k freed
Adding Swap: 2048276k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:01.3
PCI: Sharing IRQ 5 with 00:01.2
usb-ohci.c: USB OHCI at membase 0xf892d000, IRQ 5
usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:01.2
PCI: Sharing IRQ 5 with 00:01.3
usb-ohci.c: USB OHCI at membase 0xf892f000, IRQ 5
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,3), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sun:/proc# cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 sis900
alias sound-slot-0 trident
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias usb-controller usb-ohci
sun:/proc# lsmod
Module Size Used by Not tainted
autofs 11556 0 (autoclean) (unused)
sis900 11940 1
usb-ohci 19872 0 (unused)
usbcore 51808 1 [usb-ohci]
ext3 62624 2
jbd 41092 2 [ext3]
So by looking at all this info, does anyone have any idea as to what mobo it could be? Because If i know the mobo, i can tell my friend, and i'm pretty sure we can work with that.
Any help would be greatly appreeciated!
Thanks.
I have several XP 1900+ servers at rackshack. I realize they aren't selling them anymore, but I believe they are all the same hardware and etc.
They are currently running default kernels. I wanted to compile 2.4.19 with only what's needed. As in, i want to make the kernel really small. Smallest I can go.
I've asked RackShack to tell me what motherboard the server is using, but they havent responded yet, and frankly i dont think they will give me a real answer i can work with.
So I was wondering if anyone on here could help me maybe pin point, or figure it out?
I hear if you konw certain pieces of info, you might be able to figure out waht mobo it is..?
I'm not good with kernels (i would have a friend do it for me)
but here is some info
sun:/proc# cat ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
bc00-bc7f : Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D
d400-d4ff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
d400-d4ff : sis900
d800-d8ff : Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator
ff00-ff0f : Silicon Integrated Systems [SiS] 5513 [IDE]
ff00-ff07 : ide0
ff08-ff0f : ide1
sun:/proc# cat pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 2).
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=16.
I/O at 0xff00 [0xff0f].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).
Bus 0, device 1, function 1:
Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 130).
IRQ 12.
Master Capable. Latency=64. Min Gnt=52.Max Lat=11.
I/O at 0xd400 [0xd4ff].
Non-prefetchable 32 bit memory at 0xcfff7000 [0xcfff7fff].
Bus 0, device 1, function 3:
USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).
IRQ 5.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xcfffd000 [0xcfffdfff].
Bus 0, device 1, function 2:
USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).
IRQ 5.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xcfffc000 [0xcfffcfff].
Bus 0, device 1, function 4:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 2).
IRQ 11.
Master Capable. Latency=64. Min Gnt=2.Max Lat=24.
I/O at 0xd800 [0xd8ff].
Non-prefetchable 32 bit memory at 0xcfffe000 [0xcfffefff].
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. No bursts. Min Gnt=14.
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 49).
Prefetchable 32 bit memory at 0xc0000000 [0xc7ffffff].
Non-prefetchable 32 bit memory at 0xcfee0000 [0xcfefffff].
I/O at 0xbc00 [0xbc7f].
sun:/proc# cat /var/log/dmesg
Linux version 2.4.9-31 (bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Tue Feb 26 07:11:02 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003eff0000 (usable)
BIOS-e820: 000000003eff0000 - 000000003eff8000 (ACPI data)
BIOS-e820: 000000003eff8000 - 000000003f000000 (ACPI NVS)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
111MB HIGHMEM available.
On node 0 totalpages: 258032
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 28656 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.9-31
Initializing CPU#0
Detected 1592.903 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3178.49 BogoMIPS
Memory: 1010844k/1032128k available (1725k kernel code, 20004k reserved, 91k data, 224k init, 114624k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: queued sectors max/low 670960kB/539888kB, 1984 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS730
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST360021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 321k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 224k freed
Adding Swap: 2048276k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:01.3
PCI: Sharing IRQ 5 with 00:01.2
usb-ohci.c: USB OHCI at membase 0xf892d000, IRQ 5
usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:01.2
PCI: Sharing IRQ 5 with 00:01.3
usb-ohci.c: USB OHCI at membase 0xf892f000, IRQ 5
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,3), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sun:/proc# cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 sis900
alias sound-slot-0 trident
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias usb-controller usb-ohci
sun:/proc# lsmod
Module Size Used by Not tainted
autofs 11556 0 (autoclean) (unused)
sis900 11940 1
usb-ohci 19872 0 (unused)
usbcore 51808 1 [usb-ohci]
ext3 62624 2
jbd 41092 2 [ext3]
So by looking at all this info, does anyone have any idea as to what mobo it could be? Because If i know the mobo, i can tell my friend, and i'm pretty sure we can work with that.
Any help would be greatly appreeciated!
Thanks.