Hi there.

THe following servers must be rented out before June 20th, so we are chopping off their prices. Their configuration is the following:

P4 3ghz
512MB RAM
200GB HDD
100Mbit unmetered
$179/month
Set up: $0 One time fee
OR
$165/month
Set up: $79 One time fee

There's three of them available with this configuration. Location is the FDC data centre, Chicago.
Should you require any further information, or would like to order one of them, please do contact sales@hyperpipe.net. Discounts available for several orders.

Other available deals:

AMD64 3000 --
512MB RAM
80GB HDD
100Mbit unmetered
$179/Month
Set up: $45 One time fee


Regards

hmm sounds good..

maybe even a little to cheap + FDC ?

don't think this is 100mbit garantued dedicated port .. ?

no FDC uses cap to 10mbit if you extensively use the 100mbit port.

it is said in their TOS

Please do have a look at their Terms of service, located at http://www.fdcservers.net/tos.html

If you look at the end of the page, you will see the bandwidth related terms.


Regards

yes it says this:

Bandwidth usage abuse

FDCservers.net LLC pro-actively monitors backbone utilization in order to ensure that bandwidth resources are equally shared. FDCservers.net LLC has no objections against burstable usage of the 100Mbit port however customers that have sustained usage of 15Mbit (outbound only) or more may be asked to upgrade to a dedicated service plan or may have their port capped to 10Mbit



i just dont get why an "unmetered" service gets bandwidth usage as 'abuse'...

i think unmetered means unmetered !

if they mean unmetered, and no cap limits...

it seems like FDC plays with words, for example:

100Mbit unmetered service plan

Each server is connected via private* (non-shared*) 100Mbit port to our 6Gbit backbone which is shared* by all servers that have subscribed to unmetered service plan. The bandwidth is NOT dedicated.

they say keywords like private, and not-shared, while after this they "change subject" by mentioning that their main backbone is shared...

The 100mbit port is private, the 6gbit backbone is shared.


Regards

so If I used about 7 TB outbound would I get Bandwith abuse. Looking at doing a filehosting site.

Originally posted by kmizt
so If I used about 7 TB outbound would I get Bandwith abuse. Looking at doing a filehosting site.

Definately. However, if you were to use 15mbit+ 24/7, you will get capped to 10mbit.

I most likely will. Do you have a solution that this won't happen or where I can limit it to 14.9 mbit for certain hours of the day ;)

kmizt, depends on what your budget is :)


Regards

Other Hdds possible ??

Sure thing. Just let us know what sort of drive you require and we'll give you a quote.


Regards