Centmin Mod (http://centminmod.com/) is a modified version of BTCentral's original Centmin Project (http://centmin.com/) (WHT thread (http://www.webhostingtalk.com/showthread.php?t=981088)).

Started it's own thread separate from original Centmin thread (http://www.webhostingtalk.com/showthread.php?t=981088), as some end users are confusing the two versions.

What is Centmin Mod ?

I started modifying Ben's awesome original Centmin script (http://www.webhostingtalk.com/showthread.php?t=981088) for my own needs specifically for vBulletin/wordpress usage with MariaDB MySQL performance fork alternative to MySQL community release versions and slowly it grew to what it is now, Centmin Mod project (http://centminmod.com/) with a full on shell menu based installer. You can see it in action on live site Centminmod.com (http://centminmod.com/) which runs on 5x LEB CentOS 6.0 32bit OpenVZ VPSes.

It auto installs Nginx web server with log rotation along with various software: PHP-FPM with log rotation, better performing MySQL fork, MariaDB 5.2.x MySQL server, Memcached v1.4.10, Memcache v3.0.5, choice of PHP opcode cachers like Xcache v1.3.2 and APC Cache v3.1.9, CSF Firewall, Siege benchmark as well as CentOS updated version of Python v2.7.2. Also included is a custom ioping.sh disk i/o benchmark script which is a wrapper script to use ioping to test disk's random and sequential disk speeds.

FAQ: http://centminmod.com/faq.html
CHANGE LOG: http://centminmod.com/changelog.html
DOWNLOAD: http://vbtechsupport.com/920/

The install menu
--------------------------------------------------------
Centmin 1.2.2-eva2000.10 - http://centminmod.com
Menu/Mods Author: eva2000 (vbtechsupport.com)
Centmin Original Author: BTCentral (btcentral.org.uk)
--------------------------------------------------------
Centmin Menu
--------------------------------------------------------
1). Centmin Install
2). Add Nginx vhost domain
3). NSD setup domain name DNS
4). Nginx Upgrade
5). PHP Upgrade
6). XCache Re-install
7). APC Cache Re-install
8). XCache Install
9). APC Cache Install
10). Memcached Server Re-install
11). MariaDB 5.2 Upgrade
12). Install ioping.sh vbtechsupport.com/1239/
13). SELinux disable
14). Setup Logrotate for Nginx
15). Setup Logrotate for PHP-FPM
16). Change SSHD Port Number
17). Multi-thread compression: pigz,pbzip2,lbzip2,p7zip etc
18). Exit
--------------------------------------------------------
Enter option [ 1 - 18 ]
--------------------------------------------------------

Nginx
nginx version: nginx/1.1.12
built by gcc 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC)
TLS SNI support enabled
configure arguments: --sbin-path=/usr/local/sbin --conf-path=/usr/local/nginx/conf/nginx.conf
--with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module
--with-http_sub_module
--with-http_addition_module --with-http_secure_link_module --with-http_flv_module --with-http_realip_module
--add-module=../ngx-fancyindex-ngx-fancyindex --add-module=../ngx_cache_purge-1.4
--add-module=../nginx-accesskey-2.0.3
--with-openssl=../openssl-1.0.0e --with-openssl-opt=enable-tlsext
PHP 5.3.9 (cli) (built: Jan 15 2012 16:53:40)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies
Configure Command => '../configure' '--enable-cgi' '--enable-fpm' '--with-mcrypt' '--with-mhash'
'--with-zlib' '--with-gettext' '--enable-exif' '--enable-zip' '--with-bz2' '--enable-soap'
'--enable-sockets' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--enable-shmop'
'--with-pear' '--enable-mbstring' '--with-openssl' '--with-mysql=/usr/bin/'
'--with-libdir=lib64' '--with-mysqli=/usr/bin/mysql_config' '--with-mysql-sock' '--with-curl'
'--with-gd' '--with-xmlrpc' '--enable-bcmath' '--enable-calendar' '--enable-ftp' '--enable-gd-native-ttf'
'--with-freetype-dir=lib64' '--with-jpeg-dir=lib64' '--with-png-dir=lib64' '--with-xpm-dir=lib64' '--enable-pdo' '--with-pdo-sqlite' '--with-pdo-mysql'
'--enable-inline-optimization' '--with-imap' '--with-imap-ssl' '--with-kerberos'
'--with-fpm-user=nginx' '--with-fpm-group=nginx'

MariaDB 5.2.10 MySQL
Server version 5.2.10-MariaDB-mariadb107
Protocol version 10
Connection Localhost via UNIX socket
UNIX socket /var/lib/mysql/mysql.sock
Uptime: 10 hours 32 min 44 sec

Threads: 1 Questions: 1 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.0

Memcached v1.4.10 server with Libevent 2.0.16 stable
STAT pid 1692
STAT uptime 38520
STAT time 1326649059
STAT version 1.4.10
STAT libevent 2.0.16-stable
STAT pointer_size 64
STAT rusage_user 0.008998
STAT rusage_system 1.184819
STAT curr_connections 5
STAT total_connections 7
STAT connection_structures 6
STAT reserved_fds 20
STAT cmd_get 0
STAT cmd_set 0
STAT cmd_flush 0
STAT cmd_touch 0
STAT get_hits 0
STAT get_misses 0
STAT delete_misses 0
STAT delete_hits 0
STAT incr_misses 0
STAT incr_hits 0
STAT decr_misses 0
STAT decr_hits 0
STAT cas_misses 0
STAT cas_hits 0
STAT cas_badval 0
STAT touch_hits 0
STAT touch_misses 0
STAT auth_cmds 0
STAT auth_errors 0
STAT bytes_read 11
STAT bytes_written 7
STAT limit_maxbytes 8388608
STAT accepting_conns 1
STAT listen_disabled_num 0
STAT threads 4
STAT conn_yields 0
STAT hash_power_level 16
STAT hash_bytes 524288
STAT hash_is_expanding 0
STAT expired_unfetched 0
STAT evicted_unfetched 0
STAT bytes 0
STAT curr_items 0
STAT total_items 0
STAT evictions 0
STAT reclaimed 0
END

Tips:


SSH2 Telnet client tip
If your SSH2 Telnet client options allow for it you can increase the size of your scroll back buffer size to allow larger amounts of outputted text to be shown via scrolling back and forth. This is the option in VanDyke SecureCRT SSH2 telnet client I use. I set my scrollback buffer to maximum size of 128,000 lines (http://vbtechsupport.com/centminmenu/screenshots/scrollbackbuffer.png).

Centmin Mod upgrade tip
If you are upgrading a server which already previously had Centmin Mod installed, you DO NOT need to run option #1, instead run option #4 and then option #5 for upgrading Nginx web server and upgrading PHP.
Centmin Mod FAQ (http://centminmod.com/faq.html)
Best to first test install on a local CentOS server i.e. install VMWARE, VirtualBOX etc to create a test server if you can to get a feel for the script.

PHP upgrade is failing for me - not sure if this is a non-mod problem


Initializing download: http://us.php.net/get/php-5.3.9.tar.gz/from/this/mirror
File size: 15390277 bytes
Opening output file php-.tar.gz
Starting download

Connection 1 finished ]
Connection 2 finished ]
Connection 0 finished ]
[100%] [..................................................] [ 1.2MB/s] [00:00]

Downloaded 14.7 megabytes in 12 seconds. (1186.58 KB/s)
tar (child): php-5.3.9.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
./centmin.sh: line 1956: cd: php-5.3.9: No such file or directory

*************************************************
* Updating php.ini...
*************************************************
old php.ini will be saved at /usr/local/lib/php.ini-oldversion
if you have modified your old php.ini i.e. installed and loaded
APC, Xcache, or Memcache - please re-install them after php upgrade
...
cp: cannot stat `php.ini-production': No such file or directory

make: *** No rule to make target `clean'. Stop.
./centmin.sh: line 1999: ./buildconf: No such file or directory
make: *** No rule to make target `clean'. Stop.
inc/php_configure.inc: line 10: ../configure: No such file or directory
*************************************************

Tue Jan 17 06:04:09 EST 2012
Error: 127, PHP configure failed

*************************************************
[root@localhost centmin-v1.2.2mod]#

Looks like php upgrade error detection aborted at configure stage as php version number for the tar.gz file wasn't found. I've updated v0.10 centmin zip file, so redownload it and use the updated centmin.sh file to run php upgrade menu option.

I did the upgrade, it was flawless.

Any plans to add subversion installation to the script?

I see there is another Nginx installer here that supports more software installs - http://www.webhostingtalk.com/showthread.php?t=1117043

Might be nice to add a few of those to yours?

I did the upgrade, it was flawless.

Any plans to add subversion installation to the script?Great to hear, unfortunately no plans right now.

I see there is another Nginx installer here that supports more software installs - http://www.webhostingtalk.com/showthread.php?t=1117043

Might be nice to add a few of those to yours? No plans to add some of those items as they aren't needed, i.e. eaccelerator and ftp app (use something like winscp instead on your end)

Could you run a low traffic wordpress installation with this script on half a meg of RAM?

Thanks for posting this - you rock!

Hello everyone! I just installed centmin mod in my vmware and it was successful. I am a newbie here and I want to learn more about nginx.
Since there's no control panel here like cPanel or Plesk(which I was used to), I am wondering how to setup/add/edit ftp accounts for domains(vhosts) added?
And also, what is the default username/password for memcache.php?

Thank you and I am very much excited to play with this and eventually use it in my existing website. My site is currently running nginx as proxy + apache2 + Plesk and I want to get rid of Plesk because it costs so much.

I also forgot to ask. I know this sounds crazy but I really need to use like .htaccess in apache (because of the software I bought). I have successfuly converted the htaccess properly for nginx using this tool: http://www.anilcetin.com/convert-apache-htaccess-to-nginx/

Now what's next? Will still use .htaccess file but with nginx rewrite rule inside? or does nginx uses different filename for htaccess? Sorry for this newbie questions. I'vee been searching the net for weeks to successfully migrate to nginx.

Could you run a low traffic wordpress installation with this script on half a meg of RAM?

Thanks for posting this - you rock!You could but depends on traffic and database concurrency load levels and you may need to further tune nginx, php-fpm and mariadb mysql settings based on those concurrency load levels.

Hello everyone! I just installed centmin mod in my vmware and it was successful. I am a newbie here and I want to learn more about nginx.
Since there's no control panel here like cPanel or Plesk(which I was used to), I am wondering how to setup/add/edit ftp accounts for domains(vhosts) added?
And also, what is the default username/password for memcache.php?

Thank you and I am very much excited to play with this and eventually use it in my existing website. My site is currently running nginx as proxy + apache2 + Plesk and I want to get rid of Plesk because it costs so much.there is no default password for memcache.php, you set the password at install time when it prompts you for memcache admin username and password. You can change in in the memcache.php file itself though.

As to learning about nginx 2 best sources on the internet are


http://wiki.nginx.org/
http://forum.nginx.org/


Adding vhosts http://centminmod.com/faq.html#setupvhostdns as to ftp, you'll have to add that yourself. Google.com is your friend or ask on this forum.

I also forgot to ask. I know this sounds crazy but I really need to use like .htaccess in apache (because of the software I bought). I have successfuly converted the htaccess properly for nginx using this tool: http://www.anilcetin.com/convert-apache-htaccess-to-nginx/

Now what's next? Will still use .htaccess file but with nginx rewrite rule inside? or does nginx uses different filename for htaccess? Sorry for this newbie questions. I'vee been searching the net for weeks to successfully migrate to nginx.

No nginx doesn't support htaccess so accessing .htaccess won't work, so you need nginx's own rewrite rule format/syntax to be added to virtual host record for your nginx added vhost. Again best sources to look at are


http://wiki.nginx.org/
http://forum.nginx.org/

heads up if you updated to PHP 5.3.9, there's a security flaw and needs running update to PHP 5.3.10 http://www.webhostingtalk.com/showthread.php?t=1123125

for centmin mod users, run menu option #5 and when prompted for version number = 5.3.10

v0.11 is being tested - I've added Suhosin PHP Extension menu option as well

--------------------------------------------------------
Centmin 1.2.2-eva2000.11 - http://centminmod.com
--------------------------------------------------------
Centmin Menu
--------------------------------------------------------
1). Centmin Install
2). Add Nginx vhost domain
3). NSD setup domain name DNS
4). Nginx Upgrade
5). PHP Upgrade
6). XCache Re-install
7). APC Cache Re-install
8). XCache Install
9). APC Cache Install
10). Memcached Server Re-install
11). MariaDB 5.2 Upgrade
12). Install ioping.sh vbtechsupport.com/1239/
13). SELinux disable
14). Setup Logrotate for Nginx
15). Setup Logrotate for PHP-FPM
16). Change SSHD Port Number
17). Multi-thread compression: pigz,pbzip2,lbzip2,p7zip etc
18). Suhosin php-fpm install
19). Exit
--------------------------------------------------------
Enter option [ 1 - 19 ]
--------------------------------------------------------

can this script be used just for installing optional components like only pigz, xcache etc ?

menu option #8 and #17 but it's for centmin mod based installs only NOT any other nginx setups done with other scripts

hi there,

i try to update php 5.3.10 and got this.

*************************************************
Automatically continuing upgrade in 30 seconds...
*************************************************

make: *** No rule to make target `clean'. Stop.
Forcing buildconf
buildconf: checking installation...
buildconf: autoconf not found.
You need autoconf version 2.13 or newer installed
to build PHP from SVN.
make: *** [buildmk.stamp] Error 1
make: *** No rule to make target `clean'. Stop.
creating cache ./config.cache
checking for Cygwin environment... no
checking for mingw32 environment... no
checking for egrep... grep -E
checking for a sed that does not truncate output... /bin/sed
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... no
checking for cc... no
configure: error: no acceptable cc found in $PATH
*************************************************

Mon Feb 6 08:08:56 EST 2012
Error: 1, PHP configure failed

*************************************************

centos 5.x ? what version ?

CentOs 5.7 / Centmin v1.2.2-eva2000.10

Hi,

After try 2-3 times, it's working now.. im not sure what i do. :D
time to configure.. thanks :D

weird

what's output of this command

ls -lh /usr/bin | grep autoconf*

Centmin Mod v1.2.2-eva2000.11 released with quite a few updates. Tested on CentOS 5.7, 6.0 and 6.2 64bit.

v1.2.2-eva2000.11 – 06/02/2012

Updated PHP from v5.3.9 to v5.3.10 http://www.php.net/archive/2012.php#id2012-02-02-1
Updated Nginx from v1.1.11 to v1.1.14 http://nginx.org/en/CHANGES
Updated Memcached server from v1.4.10 to v1.4.13
Updated MariaDB my.cnf templates adding skip-pbxt_statistics & skip-archive
Updated Pigz v2.2.2 to v2.2.3
Updated Nginx upgrade routine with NGINXUPGRADESLEEP=’20′ variable to customise how long between Nginx stop command and when source upgrade’s make command is run. On some systems Nginx service shutdown doesn’t immediately or cleanly shutdown Nginx processes, causing Nginx upgrade to fail. The upgrade routine for Nginx will now have a NGINXUPGRADESLEEP =20 second initial delay after Nginx service is shutdown before make is run. The upgrade routine then will check if Nginx processes are still running and if so, trigger a 2nd NGINXUPGRADESLEEP = 20 second delay before running make. You can adjust the delay via NGINXUPGRADESLEEP=’20′.
Fixed plzip download url
Fixed lzip download url
Fixed autoconf/autoconf-2.1.3 PHP-FPM compile on CentOS 5.7
Increased nginx.conf gzip level from default 1 to 7
Added ImageMagicK via YUM install
Added Suhosin PHP Extension Menu Install option for php-fpm
Added FFMPEG via YUM install + FFMPEG PHP extension for php-fpm


Full change log at:
http://centminmod.com/changelog.html

Download at:
http://vbtechsupport.com/920/ (for now until transition to centminmod.com domain).

When I first saw what you were doing I thought "Cool but, what good would it be for me?" I tested it out, then reinstalled and tried to do virtualmin with nginx support. I have to say, I'm back to looking at this script. Why? Because it just makes sense.

Kudos to you for all the hard work. This is quite amazing.

Hi,

Just a quick question;

Is it safe to delete /svr-setup folder, or is it required once everythings running?

Only got a 2.5GB VPS and no disk space left :(

When I first saw what you were doing I thought "Cool but, what good would it be for me?" I tested it out, then reinstalled and tried to do virtualmin with nginx support. I have to say, I'm back to looking at this script. Why? Because it just makes sense.

Kudos to you for all the hard work. This is quite amazing.Thanks glad you like :)

Hi,

Just a quick question;

Is it safe to delete /svr-setup folder, or is it required once everythings running?

Only got a 2.5GB VPS and no disk space left :(

Deleting it should be safe, it just means when you reinstall stuff like memcached, xcache, apc, you have to redownload all of them again so use up bandwidth. Upgrading disk space would better in the long term :)

Is centmin mod using sockets or TCP connections for FPM Pools as i have read that using sockets are faster.

default TCP but php config files have setup option for sockets too just need to comment out TCP settings and uncomment socket version in php-fpm.conf

i.e.

listen = 127.0.0.1:9000
listen.allowed_clients = 127.0.0.1
;listen.backlog = -1

;listen = /tmp/php5-fpm.sock

and the php.conf include in file /usr/local/nginx/conf/php.conf

location ~ \.php$ {
try_files $uri =404;
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass 127.0.0.1:9000;
#fastcgi_pass unix:/tmp/php5-fpm.sock;

^^^^Thanks! This is a great tip.

Thanks alot

hello friends WHT

Csf firewall after reboot displays

*WARNING* LF_PARSE sanity check. LF_PARSE = 600. Recommended range: 5-20 (Default: 5)

hello friends WHT

Csf firewall after reboot displays

edit /etc/csf/conf.conf and change

LF_PARSE=600

to

LF_PARSE=20

restart csf

csf -r

or

service csf restart

I can not add a rule because it does not have this file
/ etc / sysconfig / iptables


memcached faq

Command for iptables to allow port 11211

iptables -A INPUT -p tcp --dport 11211 -j ACCEPT

or edit /etc/sysconfig/iptables and add after the default port 22 line

-A INPUT -m state --state NEW -m tcp -p tcp --dport 11211 -j ACCEPT

------------------------------------------------
main settings xcache

XCache Support => enabled
Version => 1.3.2
Modules Built => cacher
Readonly Protection => N/A
Cache Init Time => 1970-01-01 10:00:00
Cache Instance Id => 0
Opcode Cache => disabled
Variable Cache => disabled
Shared Memory Schemes => mmap

whether it is well set whether to enable XCache ( Opcode Cache & Variable Cache ) ?

Opcode Cache => enabled
Variable Cache => enabled

Don't need iptable rule for memcached 11211 as csf preset custom settings in /etc/csf/conf.conf has it. I already set csf to allow memcached 11211 and 11212 by default.

xcache check /usr/local/lib/php.ini xcache settings and phpinfo.php page

correctly for a better optimization vps this Centmin is supposed to be enabled or disabled Opcode Cache & Variable Cache ?

APC not installed in my server only XCache

I already have the problem XCache and it works :)

Another problem is...

The problem is even with the csf firewall sometimes blocks IP vps ?

I already have the problem XCache and it works :)

Another problem is...

The problem is even with the csf firewall sometimes blocks IP vps ?

check your /etc/csf/csf.allow and deny files making sure vps IP isn't in block list it should do that and never have that happen before

xcache both should be enabled i.e.

XCache Support enabled
Version 1.3.2
Modules Built cacher
Readonly Protection N/A
Cache Init Time 2012-02-26 12:11:38
Cache Instance Id 9593
Opcode Cache enabled, 134,217,728 bytes, 2 split(s), with 8192 slots each
Variable Cache enabled, 8,388,608 bytes, 2 split(s), with 8192 slots each
Shared Memory Schemes mmap

/usr/sbin/csf -a 91.121.xxx.xx

add failed: 91.121.xxx.xx is one of this servers addresses!

the problem is that the CSF enabled the blocks-long connection to the VPS.
Also blocks the IP will add to the list csf.allow
91.121.235.XX

/usr/sbin/cs -e
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:67
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:67
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:67
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:67
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:68
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:68
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:68
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:68
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:111
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:111
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:111
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:111
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:113
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:113
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:113
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:113
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpts:135:139
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpts:135:139
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpts:135:139
DROP udp opt in * out * ::/0 -> ::/0 udp dpts:135:139
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:445
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:445
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:445
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:445
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:500
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:500
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:500
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:500
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:513
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:513
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:513
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:513
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:520
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:520
DROP tcp opt in * out * ::/0 -> ::/0 tcp dpt:520
DROP udp opt in * out * ::/0 -> ::/0 udp dpt:520
iptables: No chain/target/match by that name.
LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP_IN Blocked* '
iptables: No chain/target/match by that name.
LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP_OUT Blocked* '
iptables: No chain/target/match by that name.
LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP_IN Blocked* '
iptables: No chain/target/match by that name.
LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP_OUT Blocked* '
iptables: No chain/target/match by that name.
LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP_IN Blocked* '
iptables: No chain/target/match by that name.
LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP_OUT Blocked* '
ip6tables: No chain/target/match by that name.
LOG tcp opt in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP6IN Blocked* '
ip6tables: No chain/target/match by that name.
LOG tcp opt in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP6OUT Blocked* '
ip6tables: No chain/target/match by that name.
LOG udp opt in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP6IN Blocked* '
ip6tables: No chain/target/match by that name.
LOG udp opt in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP6OUT Blocked* '
ip6tables: No chain/target/match by that name.
LOG icmpv6 opt in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP6IN Blocked* '
ip6tables: No chain/target/match by that name.
LOG icmpv6 opt in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP6OUT Blocked* '
DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0
DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0
DROP all opt in * out * ::/0 -> ::/0
DROP all opt in * out * ::/0 -> ::/0
iptables: No chain/target/match by that name.
INVDROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 state INVALID
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x3F/0x00
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x3F/0x3F
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x03/0x03
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x06/0x06
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x05/0x05
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x11/0x01
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x18/0x08
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x30/0x20
iptables: No chain/target/match by that name.
INVDROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW
DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0
INVALID tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0
INVALID tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0
ACCEPT all opt -- in !lo out * 91.121.235.98 -> 0.0.0.0/0
ACCEPT all opt -- in * out !lo 0.0.0.0/0 -> 91.121.235.98
DSHIELD all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0
DROP all opt -- in * out * 103.10.188.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 109.196.140.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 109.94.212.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 110.232.160.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 110.44.128.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 113.20.160.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 114.112.224.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 116.199.128.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 121.46.64.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 122.202.96.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 128.168.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 128.199.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 129.76.64.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 130.201.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 130.222.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 132.145.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 132.232.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 134.127.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 134.172.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 134.175.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 134.209.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 134.23.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 134.33.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 136.228.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 138.43.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 139.167.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 14.192.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 140.170.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 141.136.17.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 141.136.27.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 143.135.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 143.49.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 146.185.212.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 146.185.245.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 146.185.249.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 148.105.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 148.178.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 148.248.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 150.141.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 151.123.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 152.147.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 155.190.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 157.226.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 157.232.0.0/17 -> 0.0.0.0/0
DROP all opt -- in * out * 159.223.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 162.125.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 167.224.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 167.28.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 167.97.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 170.106.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 170.120.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 170.197.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 170.67.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 170.75.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 174.138.144.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 178.218.128.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 186.190.224.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 188.170.192.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 188.212.0.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 188.247.135.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 188.247.232.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.101.200.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 192.101.240.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 192.101.248.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 192.112.112.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 192.160.44.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.171.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 192.197.87.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.219.120.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 192.219.128.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 192.219.192.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 192.219.208.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 192.223.64.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 192.229.32.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 192.26.25.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.31.212.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 192.43.153.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.43.154.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 192.43.156.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 192.43.160.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.43.175.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.43.176.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 192.43.184.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.67.16.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 192.86.85.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.104.110.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.104.12.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.104.153.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.104.176.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.104.34.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.104.41.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.104.94.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.105.121.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.105.132.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.105.141.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.105.154.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.105.184.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.105.207.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.105.245.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.106.172.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 193.106.32.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 193.107.16.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 193.110.136.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.111.235.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.142.244.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.148.47.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.16.100.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.16.213.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.169.250.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 193.178.172.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.186.9.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.201.192.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 193.228.145.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.23.126.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.238.0.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 193.243.166.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.27.232.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 193.27.246.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 193.39.78.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.41.38.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.43.134.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 193.46.211.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.0.221.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.0.245.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.1.220.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 194.110.160.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 194.116.146.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 194.126.193.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.126.251.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.140.229.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.146.204.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 194.165.4.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 194.242.2.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 194.247.48.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.247.58.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.28.112.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 194.28.44.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 194.54.156.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 194.60.205.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 194.63.144.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 194.8.74.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.114.8.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.14.112.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.149.88.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.162.6.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.182.57.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.184.86.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.190.157.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.191.102.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.2.212.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.225.176.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 195.226.197.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.226.220.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.238.242.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.28.10.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.5.161.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.54.170.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.74.88.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.78.108.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.85.204.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.88.190.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.88.226.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.93.184.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.93.208.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 195.95.151.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 195.95.155.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 196.32.216.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 198.13.0.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 198.151.152.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 198.162.208.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 198.181.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 198.183.32.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 198.186.25.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 198.20.16.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 198.204.0.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 198.205.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 198.23.32.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 198.45.32.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 198.57.64.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 198.96.224.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 199.120.163.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 199.165.32.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 199.166.200.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 199.196.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 199.198.160.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 199.198.176.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 199.198.184.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 199.198.188.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 199.200.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 199.230.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 199.230.96.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 199.245.138.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 199.246.137.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 199.246.213.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 199.246.215.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 199.248.64.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 199.33.145.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 199.34.128.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 199.46.32.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 199.5.152.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 199.60.102.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 199.84.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 199.88.32.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 199.88.48.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 2.56.0.0/14 -> 0.0.0.0/0
DROP all opt -- in * out * 200.106.128.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 200.115.112.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 200.125.168.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 200.22.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 200.3.128.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 200.50.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 201.7.208.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 201.71.0.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 202.61.108.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 203.31.88.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 203.34.70.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 203.34.71.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.106.128.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 204.106.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 204.107.208.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.126.244.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 204.130.167.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.155.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.156.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.160.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.224.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.240.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.248.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.252.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 204.187.254.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.194.184.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 204.225.159.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.225.210.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.236.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 204.44.192.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 204.52.255.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 204.57.16.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 204.89.224.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 205.137.0.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 205.142.104.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 205.144.0.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 205.144.176.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 205.159.180.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 205.172.244.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 205.175.160.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 205.189.71.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 205.189.72.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 205.203.224.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 205.214.128.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 205.235.64.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 205.236.189.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 206.197.175.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 206.197.176.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 206.197.177.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 206.197.28.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 206.197.29.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 206.201.48.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 206.203.64.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 206.224.160.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 206.227.64.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 206.81.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 207.183.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 207.189.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 207.22.192.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 208.81.136.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 208.85.32.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 208.90.0.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 209.145.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 209.148.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 209.182.64.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 209.198.176.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 209.205.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 209.205.224.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 209.213.48.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 209.51.32.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 209.95.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 213.109.208.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 213.109.96.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 213.247.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 216.151.192.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 216.212.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 31.11.43.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 31.184.226.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 31.184.227.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 31.184.236.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 31.184.237.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 31.184.242.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 31.222.200.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 41.221.112.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 46.161.29.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 58.83.8.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 62.122.32.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 62.122.72.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 62.182.152.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 64.112.0.0/17 -> 0.0.0.0/0
DROP all opt -- in * out * 64.112.128.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 64.15.0.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 64.21.192.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 64.21.212.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 64.21.216.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 64.44.0.0/16 -> 0.0.0.0/0
DROP all opt -- in * out * 66.231.64.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 67.211.208.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 67.213.128.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 67.218.208.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 69.6.80.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 72.13.16.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 72.2.176.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 72.50.192.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 78.155.220.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 78.31.184.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 79.110.16.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 79.110.160.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 79.110.176.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 79.110.48.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 79.174.0.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 81.22.152.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 84.22.96.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 85.120.94.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 85.121.39.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 85.202.160.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 85.202.192.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 85.255.112.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 86.55.210.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 86.55.96.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 88.135.64.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 88.214.211.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 89.114.9.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 89.114.97.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 89.45.14.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.193.192.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.193.72.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.194.0.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 91.194.214.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 91.195.10.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 91.196.216.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.196.232.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.198.109.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.198.125.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.198.127.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.199.112.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.199.123.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.199.230.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.200.164.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.200.176.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.200.188.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.200.240.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.200.248.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.201.124.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.201.212.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.201.236.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.201.4.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.203.92.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.204.40.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 91.204.48.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.205.40.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.207.116.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 91.208.162.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.208.228.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.14.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.183.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.184.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.186.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.238.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.48.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.58.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.209.63.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.210.172.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.211.64.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.211.88.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.107.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.123.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.135.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.163.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.198.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.201.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.220.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.41.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.45.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.212.65.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.121.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.157.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.174.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.175.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.217.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.29.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.72.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.75.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.93.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.213.94.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.216.11.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.216.122.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.216.141.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.216.190.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.216.3.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.216.73.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.217.153.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.217.162.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.217.178.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.217.249.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.220.0.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.220.62.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.220.90.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.226.212.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 91.226.78.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.226.97.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.228.132.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.229.46.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 91.229.90.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 91.230.143.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 91.232.235.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 93.120.32.0/19 -> 0.0.0.0/0
DROP all opt -- in * out * 93.168.18.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 93.168.20.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 93.168.22.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 93.168.24.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 93.174.164.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 93.175.240.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 94.126.176.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 94.130.0.0/15 -> 0.0.0.0/0
DROP all opt -- in * out * 94.154.128.0/18 -> 0.0.0.0/0
DROP all opt -- in * out * 94.158.240.0/20 -> 0.0.0.0/0
DROP all opt -- in * out * 94.232.248.0/21 -> 0.0.0.0/0
DROP all opt -- in * out * 94.60.121.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.60.122.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 94.61.247.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.146.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.147.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.149.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.150.0/23 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.240.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.241.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.243.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.244.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.245.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.246.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 94.63.247.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 95.215.140.0/22 -> 0.0.0.0/0
DROP all opt -- in * out * 95.216.0.0/15 -> 0.0.0.0/0
DROP all opt -- in * out * 95.64.11.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 95.64.13.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 95.64.37.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 95.64.38.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 95.64.39.0/24 -> 0.0.0.0/0
DROP all opt -- in * out * 95.64.98.0/23 -> 0.0.0.0/0
SPAMHAUS all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0
iptables: No chain/target/match by that name.
ACCEPT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state RELATED,ESTABLISHED
iptables: No chain/target/match by that name.
ACCEPT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state RELATED,ESTABLISHED
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:20
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:21
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:25
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:53
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:80
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:110
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:111
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:143
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:161
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:443
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:465
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:587
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:993
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:995
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:1110
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:1186
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:2202
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:11211
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:11212
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:11213
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:11214
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:2049
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:2112
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22000
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22001
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:2222
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:3334
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:8080
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:8888
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:81
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:9000
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:9001
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:9312
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:10000
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:10500
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:10501
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:6081
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:6082
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:30865
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpts:3000:3050
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:22
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:25
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:53
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:80
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:110
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:143
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:443
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:465
ACCEPT tcp opt in !lo out * ::/0 -> ::/0 tcp dpt:587
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:111
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:2049
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:1110
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:20
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:21
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:25
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:53
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:80
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:110
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:113
iptables: No chain/target/match by that name.
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:443
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:22
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:25
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:53
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:80
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:110
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:113
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:443
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:587
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:111
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:2049
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:1110
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:20
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:21
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:53
ACCEPT udp opt in !lo out * ::/0 -> ::/0 udp dpt:53
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:111
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:2049
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:1110
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:20
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:21
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:53
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:113
iptables: No chain/target/match by that name.
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state NEW udp dpt:123
ACCEPT udp opt in * out !lo ::/0 -> ::/0 udp dpt:53
ACCEPT udp opt in * out !lo ::/0 -> ::/0 udp dpt:113
ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmp type 8 limit: avg 1/sec burst 5
ACCEPT icmp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 icmp type 0
ACCEPT icmp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 icmp type 8
ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmp type 0 limit: avg 1/sec burst 5
ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmp type 11
ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmp type 3
ACCEPT icmp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 icmp type 11
ACCEPT icmp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 icmp type 3
ACCEPT icmpv6 opt in !lo out * ::/0 -> ::/0
ACCEPT icmpv6 opt in * out !lo ::/0 -> ::/0
ACCEPT udp opt -- in !lo out * 8.8.8.8 -> 0.0.0.0/0 udp spt:53 dpt:53
ACCEPT tcp opt -- in !lo out * 8.8.8.8 -> 0.0.0.0/0 tcp spt:53 dpts:1024:65535
ACCEPT udp opt -- in !lo out * 8.8.8.8 -> 0.0.0.0/0 udp spt:53 dpts:1024:65535
ACCEPT tcp opt -- in !lo out * 8.8.8.8 -> 0.0.0.0/0 tcp spts:1024:65535 dpt:53
ACCEPT udp opt -- in !lo out * 8.8.8.8 -> 0.0.0.0/0 udp spts:1024:65535 dpt:53
ACCEPT udp opt -- in !lo out * 8.8.4.4 -> 0.0.0.0/0 udp spt:53 dpt:53
ACCEPT tcp opt -- in !lo out * 8.8.4.4 -> 0.0.0.0/0 tcp spt:53 dpts:1024:65535
ACCEPT udp opt -- in !lo out * 8.8.4.4 -> 0.0.0.0/0 udp spt:53 dpts:1024:65535
ACCEPT tcp opt -- in !lo out * 8.8.4.4 -> 0.0.0.0/0 tcp spts:1024:65535 dpt:53
ACCEPT udp opt -- in !lo out * 8.8.4.4 -> 0.0.0.0/0 udp spts:1024:65535 dpt:53
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 udp spt:53
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 tcp spt:53
ACCEPT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:53
ACCEPT tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:53
ACCEPT udp opt in * out !lo ::/0 -> ::/0 udp spt:53
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp spt:53
ACCEPT udp opt in * out !lo ::/0 -> ::/0 udp dpt:53
ACCEPT tcp opt in * out !lo ::/0 -> ::/0 tcp dpt:53
ACCEPT all opt -- in lo out * 0.0.0.0/0 -> 0.0.0.0/0
ACCEPT all opt -- in * out lo 0.0.0.0/0 -> 0.0.0.0/0
LOGDROPOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0
LOGDROPIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0
ACCEPT all opt in lo out * ::/0 -> ::/0
ACCEPT all opt in * out lo ::/0 -> ::/0
LOGDROPOUT all opt in * out !lo ::/0 -> ::/0
LOGDROPIN all opt in !lo out * ::/0 -> ::/0
LOCALOUTPUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0
LOCALINPUT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0
LOCALOUTPUT all opt in * out !lo ::/0 -> ::/0
LOCALINPUT all opt in !lo out * ::/0 -> ::/0
Starting lfd:[ OK ]
csf and lfd have been enabled


/ sbin / chkconfig - list | grep iptables
iptables 0: off 1: off 2: off 3: off 4: off 5: on 6: off

works after disabling csf

/usr/sbin/csf -x

/sbin/iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination


ask for your help in the location repro


written translator :rolleyes:

the problem is that the CSF enabled the blocks-long connection to the VPS.not sure i understand what you're saying ? blocks wrong ips or long connections as in ?

What type of VPS is this ? XEN, KVM, OpenVZ, Virtuozzo ? Does VPS use eth0/1 network adaptors or venet0 labeled ones ?

Not sure if this still applies for Virtuozzo / venet0 based VPS http://forum.configserver.com/viewtopic.php?f=6&t=4095

/etc /sysconfig / network
NETWORKING="yes"
GATEWAYDEV="venet0"
NETWORKING_IPV6="yes"
IPV6_DEFAULTDEV="venet0"

venet0 , OpenVZ

Strange then as http://centminmod.com/ site itself runs on 3x OpenVZ based VPS with CSF enabled and no problems at all with CentOS 6.x 32bit.

Are you running any reverse proxies in front of nginx which may not pass along the correct visitor ip address without some changes i.e. cloudflare http://support.cloudflare.com/kb/troubleshooting/does-cloudflare-have-an-ip-module-for-nginx.

It does not vps only blocks the user's ip

sorry , Now I saw it

It does not vps only blocks the user's ip

sorry , Now I saw it


ACCEPT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state RELATED,ESTABLISHED


iptables: No chain/target/match by that name.

CSF Fix: iptables: OpenVZ

OpenVZ iptables configuration in /etc/vz/vz.conf as follows:

IPTABLES=”ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp”

Once this line is added, they will restart your vps or all vps nodes on the hardware node will be restarted to make iptables modules available.

Thanks for your help eva2000

configure: error: Cannot find MySQL header files under /usr/bin/.
Note that the MySQL client library is not bundled anymore!



centmin.sh upgrade php 5.3.10 to 5.4.0

CSF Fix: iptables: OpenVZ

OpenVZ iptables configuration in /etc/vz/vz.conf as follows:



Once this line is added, they will restart your vps or all vps nodes on the hardware node will be restarted to make iptables modules available.

Thanks for your help eva2000so fixed ?

configure: error: Cannot find MySQL header files under /usr/bin/.
Note that the MySQL client library is not bundled anymore!



centmin.sh upgrade php 5.3.10 to 5.4.0

PHP 5.4 has not been tested with centmin so downgrade back to 5.3.10 for now. Also be sure all your scripts work with PHP 5.4 changes and migration guide http://php.net/migration54

Also there's a few bugs in 5.4.0 so wait for 5.4.1

Ok, i have fixed the problem for v0.12 release of centmin mod, if you want to fix it before then edit centmin-v1.2.2mod/inc/php_configure.inc and change

-with-mysql=/usr/bin

to

--with-mysql=/usr

no idea why it was incorrectly set before as it should be /usr

But still no guarantee of compatibility with your php scripts if using PHP 5.4.0 so use at your own risk.

next release will be v1.2.2-eva2000.12 later on

# php -v
PHP 5.4.0 (cli) (built: Mar 3 2012 05:20:25)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2012 Zend Technologies

# nginx -V
nginx version: nginx/1.1.16
built by gcc 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC)
TLS SNI support enabled


# mysqladmin ver
mysqladmin Ver 9.0 Distrib 5.2.10-MariaDB, for unknown-linux-gnu on x86_64
Copyright 2000-2008 MySQL AB, 2008 Sun Microsystems, Inc,
2009 Monty Program Ab
This software comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to modify and redistribute it under the GPL license

Server version 5.2.10-MariaDB-mariadb107
Protocol version 10
Connection Localhost via UNIX socket
UNIX socket /var/lib/mysql/mysql.sock
Uptime: 23 hours 36 min 12 sec

Threads: 1 Questions: 2 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.0

thanks

We look to MariaDB 5.3.5 Stable centmin mod :)

nginx which version you recommend as an expert
nginx 1.1.14
nginx 1.1.16 ?

nginx which version you recommend as an expert
nginx 1.1.14
nginx 1.1.16 ?

both dev releases so use at own discretion

new release out

--------------------------------------------------------
Centmin 1.2.2-eva2000.12 - http://centminmod.com
--------------------------------------------------------
Centmin Menu
--------------------------------------------------------
1). Centmin Install
2). Add Nginx vhost domain
3). NSD setup domain name DNS
4). Nginx Upgrade
5). PHP Upgrade
6). XCache Re-install
7). APC Cache Re-install
8). XCache Install
9). APC Cache Install
10). Memcached Server Re-install
11). MariaDB 5.2 Upgrade
12). Install ioping.sh vbtechsupport.com/1239/
13). SELinux disable
14). Setup Logrotate for Nginx
15). Setup Logrotate for PHP-FPM
16). Change SSHD Port Number
17). Multi-thread compression: pigz,pbzip2,lbzip2,p7zip etc
18). Suhosin PHP Extension install
19). Install FFMPEG and FFMPEG PHP Extension
20). NSD Re-install
21). Exit
--------------------------------------------------------
Enter option [ 1 - 21 ]
--------------------------------------------------------

v1.2.2-eva2000.12 – 12/03/2012

Updated Nginx from v1.1.14 to v1.1.16 http://nginx.org/en/CHANGES
Updated libevent from v2.0.16 to v2.0.17 https://raw.github.com/libevent/libevent/release-2.0.17-stable/ChangeLog
Updated NSD from v3.2.8 to v3.2.10
Fixed PHP 5.4.0 upgrade error however PHP 5.4.0 seems to be currently incompatible with APC, Suhosin and FFMPEG extensions right now, so please stick with PHP 5.3.10
Fixed Memcache PHP extension reinstall routine
Added NSD re-install routine
Revised csftweaks.inc settings


Full change log at:
http://centminmod.com/changelog.html

Download at:
http://vbtechsupport.com/920/ (for now until transition to centminmod.com domain).

In behalf of all of us who are using Centmin Mod. Thanks once again George.

how to full upgrading ( update & fixed and Revised ) a server which already previously had Centmin Mod installed , run option #1 ?

In behalf of all of us who are using Centmin Mod. Thanks once again George.

you're welcome :)

how to full upgrading ( update & fixed and Revised ) a server which already previously had Centmin Mod installed , run option #1 ?

no, from faq #1 http://centminmod.com/faq.html#howtoinstall

If you are upgrading a server which already previously had Centmin Mod installed, you DO NOT need to run option #1, instead run option #4 and then #5 for upgrading Nginx web server and upgrading PHP.

no way currently to upgrade everything.. #6 or #7 (not both), #10 and #20 can be run for apc or xcache, memcached and NSD updates though

thanks eva2000

I read the faq I wanted to make sure only

New release for Nginx v1.1.17 update to fix security flaw http://nginx.org/en/security_advisories.html

v1.2.2-eva2000.13 - 16/03/2012

Updated Nginx from v1.1.16 to v1.1.17 http://nginx.org/en/CHANGES
Updated Nginx upgrade routine, it automatically backs up CONF/ directory before running upgrade and is controlled via 3 variables in centmin.sh NGINXBACKUP='y', NGINXCONFDIR='/usr/local/nginx/conf', NGINXBACKUPDIR='/usr/local/nginxbackup'


Auto backup Nginx install and conf directories

ls -lh /usr/local/nginxbackup/
total 8.0K
drwxr-xr-x 3 root root 4.0K Mar 16 06:44 confbackup
drwxr-xr-x 3 root root 4.0K Mar 16 06:44 nginxdirbackup

ls -lh /usr/local/nginxbackup/confbackup/
total 4.0K
drwxr-xr-x 3 root root 4.0K Mar 16 06:42 conf_160312-064337

ls -lh /usr/local/nginxbackup/nginxdirbackup/
total 4.0K
drwxr-xr-x 9 root root 4.0K Mar 16 05:38 nginx_160312-064337

Full change log at:
http://centminmod.com/changelog.html

Download at:
http://vbtechsupport.com/920/ (for now until transition to centminmod.com domain).

anyone knows if this is better in php-fpm.conf

pm = ondemand

instead of

pm = dynamic

ondemand was introduced in 5.3.9

Implemented FR #52569 (Add the "ondemand" process-manager to allow zero children)

in theory ondemand is better, but i haven't compared them to be honest

Regarding this line in /usr/local/nginx/conf/php.conf

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;

Is this the same as cgi.force_redirect having a value of 1? So if there's cgi.force_redirect 1 1 then we should not delete that line (fastcgi_param REDIRECT_STATUS 200; )?

Is that right?

Thanks in advance.

Regarding this line in /usr/local/nginx/conf/php.conf

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;

Is this the same as cgi.force_redirect having a value of 1? So if there's cgi.force_redirect 1 1 then we should not delete that line (fastcgi_param REDIRECT_STATUS 200; )?

Is that right?

Thanks in advance.Not entirely sure, AFAIK cgi.force_redirect (http://www.php.net/manual/en/ini.core.php#ini.cgi.force-redirect) php.ini value only works if web server - usually apache or in this case nginx supports it. For Nginx to support it, it needs

fastcgi_param REDIRECT_STATUS 200;

In other words, if you remove this line, cgi.force_redirect (http://www.php.net/manual/en/ini.core.php#ini.cgi.force-redirect) in php.ini won't work.

Don't get php running on vps with vswap (Error while installation):

fpmstart
Starting php-fpm /etc/init.d/php-fpm: line 68: /usr/local/sbin/php-fpm: No such file or directory
failed

anyone knows if this is better in php-fpm.conf

pm = ondemand

instead of

pm = dynamic

ondemand was introduced in 5.3.9

I've found it to work well. It helps to reduce memory usage during periods of light traffic.

Don't get php running on vps with vswap (Error while installation):

fpmstart
Starting php-fpm /etc/init.d/php-fpm: line 68: /usr/local/sbin/php-fpm: No such file or directory
failedphp-fpm wasn't properly installed for some reason, run menu option #5 to reinstall php

I've found it to work well. It helps to reduce memory usage during periods of light traffic. yes for lite and predominantly idle traffic periods it's good :)

php-fpm wasn't properly installed for some reason, run menu option #5 to reinstall php


Don't work for me:

Error: 2, PHP make failed (1.2.2-eva2000.13)

which version of php do you enter when prompted during upgrade ? 5.3.10 ?

what type of VPS used ? openvz, xen, kvm, vmware ??

looks like you passed configure stage of upgrade but error'd out on make stage.

what version of centos used ? 5.7 32bit or 64bit or centos 6.0, 6.1, 6.2 ? only version of centos I have yet to test is 5.8. Centmin Mod has been tested on centos 5.5, 5.6, 5.7, 6.0, 6.1, and 6.2 64bit.

Dear eva2000, first, my compliments on the professional manner in which this installer has been designed. It is the best auto-installer today. Many thanks for it.

I installed it on a test site and was so impressed that I am planning to move my main site (~5000 + visitors per day) onto it.

I have three questions.

First, why is NSD DNS Sever not included given that (i) it is a part of Centmin and (ii) relies on it for setting up the domains? Also, the script does not indicate that NSD is not installed and instead give a message that the domain zone is created.

So, I installed it separately with the command yum install nsd.

After that I ran the centmin script and chose option 3: This is the error I get:

“Creating zone file at /etc/nsd/master/domain.net.zone
---------------------------------------------
cat: /etc/nsd/master/domain.net.zone: No such file or directory

---------------------------------------------
Current zone files listing at: /etc/nsd/master/
ls: cannot access /etc/nsd/master/: No such file or directory
---------------------------------------------

---------------------------------------------
NSD entry for domain.net created successfully in /etc/nsd/nsd.conf
NSD zone created at /etc/nsd/master/domain.net.zone


The messages are contradictory. Also, a look at the etc/nsd folder shows that no /master/ folder is created.

Can you pl help to solve this problem.

Second, isn't this title (in the FAQ) somewhat misleading (to a novice) "How to setup domain / subdomain to use NSD DNS so I can host DNS on my own server instead of using my web host, registrar or DNS service provider's name servers?" To me, it suggested that this was an option to what one had to do at the registrar. However, it appears not to be an option at all. At the registrar's, one has to set the IP address for the nameservers. At the localhost, one has to setup the nameservers using the NSD DNS server. So, both have to be done simultaneously. Pl correct me if I am wrong.

Third, what does this mean?

ns1/ns2 assigned ip addresses can not be used to host other domain names

What I have been doing so far (with Webmin & Kloxo control panels) is to set up nameservers for each domain at the registrar (namecheap) and point them to the same IP address. In Webmin/Kloxo, one can set up multiple domain master zones with the same IP. Is that not possible with Centminmod?

which version of php do you enter when prompted during upgrade ? 5.3.10 ?


Used 5.3.10 and tried older.

Weird,tested on 3 Openvz vps now

Worked: CentOS release 6.2 (Final) - Linux 2.6.32-042stab049.6 #1 SMP Mon Feb 6 19:17:43 MSK 2012 i686 i686 i386 GNU/Linux
Failed: CentOS release 6.2 (Final) - Linux 2.6.32-042stab044.11 #1 SMP Wed Dec 14 16:02:00 MSK 2011 i686 athlon i386 GNU/Linux
Failed: CentOS release 6.2 (Final) - Linux 2.6.32-042stab049.6 #1 SMP Mon Feb 6 19:17:43 MSK 2012 i686 i686 i386 GNU/Linux

investorz, NSD is usually installed for centmin mod by default but via source compile and not YUM/RPM so if you didn't find the install, it could be NSD failed to install for some reason. NSD 3.2.8 had some issues, so v0.13 installs NSD 3.2.10 from changelog http://centminmod.com/changelog.html, so make sure you have NSD_VERSION='3.2.10' listed in centmin.sh script and then run menu option #20, for NSD Re-install.

Might want to remove YUM installed NSD first though to prevent conflicts.

As to NSD setup FAQ page, I've updated the latter part to clarify things including the statement regarding ip address usage for nameservers/domain names. http://centminmod.com/nginx_domain_dns_setup.html

Used 5.3.10 and tried older.

Weird,tested on 3 Openvz vps now

Worked: CentOS release 6.2 (Final) - Linux 2.6.32-042stab049.6 #1 SMP Mon Feb 6 19:17:43 MSK 2012 i686 i686 i386 GNU/Linux
Failed: CentOS release 6.2 (Final) - Linux 2.6.32-042stab044.11 #1 SMP Wed Dec 14 16:02:00 MSK 2011 i686 athlon i386 GNU/Linux
Failed: CentOS release 6.2 (Final) - Linux 2.6.32-042stab049.6 #1 SMP Mon Feb 6 19:17:43 MSK 2012 i686 i686 i386 GNU/Linux
Weird indeed. If you have option to reload your OS i.e. solusVM control panel to start fresh. You can attempt a fresh centmin mod install but this time log the entire process as outlined from FAQ at http://centminmod.com/faq.html#loginstall

When you hit php-fpm make failure. End the centmin.sh script and exit and look at the log file to see what's going on. Or you can let the entire centmin.sh script complete, then exit menu and then exit logging and view that log file. Don't post entire contents of log file here though, would be too long to read heh.

Dear eva2000, uninstalling and reinstalling NSD as suggested by you solved the problem. It was smooth sailing thereafter.

Memcache is working as shown by phpinfo. But I get the error "Cant connect to:mymemcache-server1:11211" when I access memcache.php. Is is a firewall problem? Would you have a ready solution?

investorz, NSD is usually installed for centmin mod by default but via source compile and not YUM/RPM so if you didn't find the install, it could be NSD failed to install for some reason. NSD 3.2.8 had some issues, so v0.13 installs NSD 3.2.10 from changelog http://centminmod.com/changelog.html, so make sure you have NSD_VERSION='3.2.10' listed in centmin.sh script and then run menu option #20, for NSD Re-install.

Might want to remove YUM installed NSD first though to prevent conflicts.

As to NSD setup FAQ page, I've updated the latter part to clarify things including the statement regarding ip address usage for nameservers/domain names. http://centminmod.com/nginx_domain_dns_setup.html

Now I've got stuck with permalinks. Suppose I have one domain with two WP installations in folders called WP1 & WP2. What changes do I make to the domain.conf file?

I seem to have stumbled on a solution to the problem of enabling permalinks for multiple Wordpress folders in one domain.

In the domain.conf file (which you will find at /usr/local/nginx/conf/conf.d) add a "location block" for each folder. My sample is as follows:

server {
server_name mydomain.com www.mydomain.com;

# limit_conn

limit_per_ip 16;
# ssi on;

access_log

/home/nginx/domains/mydomain.com/log/access.log;
error_log

/home/nginx/domains/mydomain.com/log/error.log;

root

/home/nginx/domains/mydomain.com/public;

location / {



# Enables directory listings when index file not found
#autoindex on;

# Shows

file listing times as local time
#autoindex_localtime on;

# Enable for

vBulletin usage WITHOUT vbSEO installed
#try_files / /index.php;

}

location /WP1 {
try_files $uri $uri/ /WP1/index.php?q=$uri$is_args$args;

}

location /WP2 {

try_files $uri $uri/ /WP2/index.php?q=$uri$is_args$args;

}

location /WP3 {

try_files $uri $uri/ /WP3/index.php?q=$uri$is_args$args;

}

location /WP4 {

try_files $uri $uri/ /WP4/index.php?q=$uri$is_args$args;

}

include /usr/local/nginx/conf/staticfiles.conf;
include

/usr/local/nginx/conf/php.conf;
include /usr/local/nginx/conf/drop.conf;


#include /usr/local/nginx/conf/errorpage.conf;
}

This has got me a bit perplexed. I moved all my files over from the Plesk site to the centminmod site and here are the results:

From the Plesk site:

[root@ind ~]# free -m
total used free shared buffers cached
Mem: 768 205 562 0 0 0
-/+ buffers/cache: 205 562
Swap: 0 0 0

[root@ind ~]# top
top - 15:12:21 up 2 days, 3:52, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 41 total, 1 running, 40 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 0.3%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 786432k total, 211196k used, 575236k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 18 0 10364 736 620 S 0.0 0.1 0:09.42 init
1136 root 21 -4 12632 684 356 S 0.0 0.1 0:00.00 udevd
1426 root 15 0 5924 620 500 S 0.0 0.1 0:01.63 syslogd
1466 sw-cp-se 15 0 60224 3312 1408 S 0.0 0.4 0:00.50 sw-cp-serverd
1468 root 15 0 62676 1188 620 S 0.0 0.2 0:00.97 sshd
1476 root 15 0 21660 964 740 S 0.0 0.1 0:00.01 xinetd
1489 root 17 0 13184 612 476 S 0.0 0.1 0:00.00 couriertcpd
1491 root 18 0 3804 560 472 S 0.0 0.1 0:00.00 courierlogger
1499 root 20 0 13184 608 472 S 0.0 0.1 0:00.00 couriertcpd
1501 root 20 0 3672 380 312 S 0.0 0.0 0:00.00 courierlogger
1507 root 15 0 13184 612 476 S 0.0 0.1 0:00.00 couriertcpd
1509 root 18 0 3804 560 472 S 0.0 0.1 0:00.00 courierlogger
1516 root 15 0 13184 612 476 S 0.0 0.1 0:00.13 couriertcpd
1518 root 18 0 3804 560 472 S 0.0 0.1 0:00.09 courierlogger
1600 root 15 0 49828 2240 1728 S 0.0 0.3 0:03.33 master
1601 postfix 15 0 50156 2516 1824 S 0.0 0.3 0:02.00 qmgr
1614 postfix 18 0 104m 1608 1112 S 0.0 0.2 0:04.70 psa-pc-remote
1737 named 25 0 88688 4152 1984 S 0.0 0.5 0:15.10 named
1798 root 25 0 10780 1332 1064 S 0.0 0.2 0:00.02 mysqld_safe
1808 postfix 15 0 50780 2424 1780 S 0.0 0.3 0:00.43 tlsmgr
3095 mysql 15 0 404m 88m 7716 S 0.0 11.6 6:38.81 mysqld
3195 root 18 0 155m 58m 3092 S 0.0 7.6 0:03.04 spamd
3481 root 15 0 304m 21m 8976 S 0.0 2.8 0:00.18 httpd
3483 apache 15 0 230m 9556 476 S 0.0 1.2 0:00.00 httpd
3484 apache 15 0 304m 14m 1668 S 0.0 1.9 0:00.03 httpd
3485 apache 15 0 304m 14m 1660 S 0.0 1.9 0:00.02 httpd
3486 apache 15 0 304m 14m 1668 S 0.0 1.9 0:00.03 httpd
3487 apache 15 0 304m 14m 1644 S 0.0 1.9 0:00.03 httpd
3488 apache 18 0 304m 14m 1660 S 0.0 1.9 0:00.02 httpd
3489 apache 18 0 304m 14m 1636 S 0.0 1.9 0:00.01 httpd
3490 apache 15 0 304m 14m 1652 S 0.0 1.9 0:00.02 httpd
3491 apache 15 0 304m 14m 1660 S 0.0 1.9 0:00.03 httpd
3591 popuser 15 0 155m 56m 984 S 0.0 7.3 0:00.01 spamd
3732 postfix 15 0 49888 2160 1672 S 0.0 0.3 0:00.00 pickup
3753 root 15 0 20888 1184 588 S 0.0 0.2 0:00.79 crond
3761 root 18 0 18748 464 316 S 0.0 0.1 0:00.00 atd
3767 root 15 0 96616 4080 3204 S 0.0 0.5 0:00.05 sshd
3769 root 18 0 46756 816 412 S 0.0 0.1 0:00.00 saslauthd
3770 root 18 0 46756 560 156 S 0.0 0.1 0:00.00 saslauthd
3771 root 16 0 12080 1736 1324 S 0.0 0.2 0:00.04 bash
3796 root 16 0 12624 1236 956 R 0.0 0.2 0:00.20 top


From the centminmod site:


[root@30007831 ~]# free -m
total used free shared buffers cached
Mem: 1024 610 413 0 0 0
-/+ buffers/cache: 610 413
Swap: 0 0 0
[root@30007831 ~]# top

top - 19:43:56 up 1 day, 15 min, 1 user, load average: 0.01, 0.03, 0.00
Tasks: 47 total, 1 running, 46 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1048800k total, 626224k used, 422576k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 15 0 2824 1384 1224 S 0.0 0.1 0:00.43 init
1707 root 14 -4 2456 548 320 S 0.0 0.1 0:00.00 udevd
1784 root 15 0 8464 952 476 S 0.0 0.1 0:00.02 sshd
1821 root 18 0 8672 716 292 S 0.0 0.1 0:00.00 saslauthd
1822 root 18 0 8672 488 64 S 0.0 0.0 0:00.00 saslauthd
1854 root 20 0 3164 860 668 S 0.0 0.1 0:00.00 xinetd
1901 root 15 0 7060 1220 624 S 0.0 0.1 0:00.17 crond
7333 root 15 0 12272 2200 960 S 0.0 0.2 0:00.90 sendmail
7341 smmsp 18 0 12060 1748 720 S 0.0 0.2 0:00.00 sendmail
13438 nsd 18 0 4348 848 592 S 0.0 0.1 0:00.00 nsd
13439 nsd 23 0 11212 768 292 S 0.0 0.1 0:00.00 nsd
13441 nsd 15 0 4396 576 256 S 0.0 0.1 0:00.30 nsd
14084 root 17 0 5680 2048 1020 S 0.0 0.2 0:00.03 nginx
15936 root 15 0 11356 3316 2620 S 0.0 0.3 0:00.06 sshd
15938 root 15 0 7784 1660 1252 S 0.0 0.2 0:00.00 sftp-server
17461 root 18 0 11492 3688 2948 S 0.0 0.4 0:00.47 sshd
17465 root 15 0 6240 1676 1428 S 0.0 0.2 0:00.02 bash
18181 root 15 0 11492 3360 2616 S 0.0 0.3 0:00.21 sshd
18183 root 15 0 7784 1704 1248 S 0.0 0.2 0:00.05 sftp-server
18391 nginx 10 -10 12716 8644 920 S 0.0 0.8 0:00.92 nginx
19490 root 15 0 2536 1084 872 R 0.0 0.1 0:00.23 top
23816 root 18 0 6180 1360 1164 S 0.0 0.1 0:00.04 mysqld_safe
24105 mysql 15 0 101m 46m 5928 S 0.0 4.5 0:36.06 mysqld
24162 root 17 0 7372 1348 1008 S 0.0 0.1 0:00.15 rsyslogd
26013 root 18 0 21432 14m 1696 S 0.0 1.5 0:05.00 lfd
26478 nobody 18 0 7300 892 552 S 0.0 0.1 0:00.65 memcached
30212 root 18 0 70336 3368 1068 S 0.0 0.3 0:00.61 php-fpm
30213 nginx 16 0 84960 49m 33m S 0.0 4.8 0:53.83 php-fpm
30214 nginx 16 0 74916 38m 31m S 0.0 3.8 0:53.33 php-fpm
30215 nginx 15 0 94500 58m 33m S 0.0 5.8 0:55.08 php-fpm
30216 nginx 16 0 83396 47m 32m S 0.0 4.6 0:52.06 php-fpm
30217 nginx 16 0 92184 54m 30m S 0.0 5.3 0:51.94 php-fpm
30218 nginx 15 0 81940 44m 30m S 0.0 4.3 0:52.18 php-fpm
30219 nginx 16 0 93332 55m 30m S 0.0 5.4 0:52.27 php-fpm
30221 nginx 15 0 84680 48m 32m S 0.0 4.7 0:53.48 php-fpm
30222 nginx 16 0 92820 56m 32m S 0.0 5.5 0:56.01 php-fpm
30224 nginx 15 0 81592 45m 31m S 0.0 4.4 0:52.05 php-fpm
30225 nginx 16 0 95708 58m 31m S 0.0 5.7 0:52.64 php-fpm
30227 nginx 15 0 81788 45m 31m S 0.0 4.4 0:55.63 php-fpm
30228 nginx 16 0 94364 56m 30m S 0.0 5.5 0:53.79 php-fpm
30230 nginx 16 0 93996 57m 31m S 0.0 5.6 0:54.69 php-fpm
30231 nginx 15 0 93216 55m 30m S 0.0 5.4 0:52.69 php-fpm
30233 nginx 16 0 85568 48m 31m S 0.0 4.8 0:50.74 php-fpm
30234 nginx 15 0 94628 57m 31m S 0.0 5.7 0:54.58 php-fpm
30235 nginx 16 0 95596 61m 34m S 0.0 6.0 0:52.02 php-fpm
30236 nginx 15 0 82888 45m 30m S 0.0 4.5 0:48.01 php-fpm
30237 nginx 15 0 95092 57m 31m S 0.0 5.6 0:52.14 php-fpm


How is it that the Plesk site shows RAM consumption at 205MB while the Centminmod site shows it at 610MB? The only incremental thing I added to Centmin is phpmyadmin (which is also there in the plesk site)

Same server?

No different servers.

I rebooted the Centminmod VPS, ruffled up a lot of pages, and the results are as follows:

[root@30007831 ~]# free -m
total used free shared buffers cached
Mem: 1024 529 494 0 0 0
-/+ buffers/cache: 529 494
Swap: 0 0 0
[root@30007831 ~]#


top - 20:21:54 up 29 min, 1 user, load average: 0.06, 0.10, 0.03
Tasks: 45 total, 1 running, 44 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1048800k total, 541288k used, 507512k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 15 0 2860 1332 1160 S 0.0 0.1 0:00.45 init
1161 root 14 -4 2456 560 324 S 0.0 0.1 0:00.00 udevd
1425 root 18 0 6348 1296 980 S 0.0 0.1 0:00.00 rsyslogd
1459 nsd 18 0 4348 844 592 S 0.0 0.1 0:00.00 nsd
1460 nsd 18 0 11212 860 388 S 0.0 0.1 0:00.00 nsd
1461 nsd 15 0 4396 576 256 S 0.0 0.1 0:00.03 nsd
1473 root 18 0 70336 3360 1068 S 0.0 0.3 0:00.01 php-fpm
1474 nginx 16 0 83120 39m 24m S 0.0 3.8 0:04.13 php-fpm
1475 nginx 15 0 85752 44m 26m S 0.0 4.3 0:03.64 php-fpm
1476 nginx 15 0 85096 39m 22m S 0.0 3.9 0:03.24 php-fpm
1477 nginx 16 0 83600 38m 22m S 0.0 3.7 0:02.20 php-fpm
1478 nginx 15 0 82440 35m 20m S 0.0 3.4 0:02.66 php-fpm
1479 nginx 15 0 83548 36m 21m S 0.0 3.6 0:02.35 php-fpm
1480 nginx 16 0 85236 39m 22m S 0.0 3.8 0:03.03 php-fpm
1481 nginx 15 0 85068 35m 18m S 0.0 3.5 0:02.36 php-fpm
1482 nginx 16 0 85136 41m 24m S 0.0 4.1 0:02.61 php-fpm
1484 nginx 15 0 85444 35m 17m S 0.0 3.4 0:02.49 php-fpm


The RAM usage is still higher than the Plesk site though both sites have identical content.

investorz, for memcached read troubleshooting part of FAQ at http://centminmod.com/faq.html#troubleshootingerrors one entry deals with memcached

as to memory usage it's php-fpm processes seems I need to reword the question regarding how much memory you have <256MB question needs to read <2048MB

try these 11 commands as root user in ssh telnet to grab the new php-fpm.conf ondemand version and minimum memory usage my.cnf


cd /usr/local/etc/
wget http://centminmod.com/phpfpm/php-fpm-minond.conf
cp php-fpm.conf php-fpm.conf-backupold
unalias cp
cp -f php-fpm-minond.conf php-fpm.conf
service php-fpm restart
cd /etc
wget http://centminmod.com/mariadb/my-mdb-min.cnf
unalias cp
cp -f my-mdb-min.cnf my.cnf
service mysql restart

Dear eva2000, now I have a smile on my lips:

[root@30007831 ~]# free -m
total used free shared buffers cached
Mem: 1024 182 842 0 0 0
-/+ buffers/cache: 182 842
Swap: 0 0 0
[root@30007831 ~]#

Thanks for your hard work!!


investorz, for memcached read troubleshooting part of FAQ at http://centminmod.com/faq.html#troubleshootingerrors one entry deals with memcached

as to memory usage it's php-fpm processes seems I need to reword the question regarding how much memory you have <256MB question needs to read <2048MB

try these 11 commands as root user in ssh telnet to grab the new php-fpm.conf ondemand version and minimum memory usage my.cnf


cd /usr/local/etc/
wget http://centminmod.com/phpfpm/php-fpm-minond.conf
cp php-fpm.conf php-fpm.conf-backupold
unalias cp
cp -f php-fpm-minond.conf php-fpm.conf
service php-fpm restart
cd /etc
wget http://centminmod.com/mariadb/my-mdb-min.cnf
unalias cp
cp -f my-mdb-min.cnf my.cnf
service mysql restart

I have a Level 3 VPS with hostgator running Apache & Plesk. The 1.3 Ghz CPU & 768 MB RAM is wholly inadequate and whenever I posted something which drew even 80-100 concurrent vistors, the VPS would crash. This is not HG’s fault but the sheer weight of Apache & Plesk.

So, I moved to a Level 2 “Premium” VPS with burstnet.eu. I was attracted to Burst because for a lesser price ($ 20), it gives much more in the form of a 2.5Ghz CPU, 1-2 GB RAM and a supposed less crowded space.

I installed Centminmod. I do not have a control panel. The transfer of 10+ GB data took only a few moments though the configuration took several hours owing to my learning curve. I moved 5 domains over.

My Centminmod site is now, content wise, an exact replica of my Apache-Plesk site.

The RAM figures of both in the morning were as follows:

In Apache-Plesk (nil visitors)

[root@ind ~]# free -m
total used free shared buffers cached
Mem: 768 209 558 0 0 0
-/+ buffers/cache: 209 558
Swap: 0 0 0
[root@ind ~]#

In Centminmod (about 50 concurrent visitors)

[root@30007831 ~]# free -m
total used free shared buffers cached
Mem: 1024 299 724 0 0 0
-/+ buffers/cache: 299 724
Swap: 0 0 0
[root@30007831 ~]# top

top - 19:09:12 up 23:16, 1 user, load average: 0.27, 0.30, 0.27
Tasks: 30 total, 1 running, 29 sleeping, 0 stopped, 0 zombie
Cpu(s): 3.2%us, 0.2%sy, 0.0%ni, 96.5%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1048800k total, 307092k used, 741708k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
18221 nginx 5 -10 20328 16m 928 S 2.0 1.6 1:10.81 nginx
1 root 15 0 2860 1336 1164 S 0.0 0.1 0:00.45 init
1161 root 14 -4 2456 560 324 S 0.0 0.1 0:00.00 udevd
1425 root 18 0 6348 1320 980 S 0.0 0.1 0:00.09 rsyslogd
1459 nsd 18 0 4348 844 592 S 0.0 0.1 0:00.00 nsd
1460 nsd 18 0 11212 860 388 S 0.0 0.1 0:00.00 nsd
1461 nsd 15 0 4396 576 256 S 0.0 0.1 0:01.34 nsd
1502 root 15 0 8464 992 512 S 0.0 0.1 0:00.01 sshd
1509 root 18 0 3164 892 704 S 0.0 0.1 0:00.00 xinetd
1822 root 18 0 8672 764 336 S 0.0 0.1 0:00.00 saslauthd
1823 root 18 0 8672 492 64 S 0.0 0.0 0:00.00 saslauthd
3586 nobody 15 0 7300 896 552 S 0.0 0.1 0:00.50 memcached
3613 root 15 0 12272 2196 960 S 0.0 0.2 0:00.79 sendmail
3620 smmsp 18 0 12064 1752 720 S 0.0 0.2 0:00.00 sendmail
3640 root 15 0 7064 1216 624 S 0.0 0.1 0:00.14 crond
7557 root 15 0 66956 3208 916 S 0.0 0.3 0:01.79 php-fpm
7610 root 19 0 3012 1320 1120 S 0.0 0.1 0:00.00 mysqld_safe
[root@30007831 ~]#

After that I posted something that drew about 1800 clicks in 30 minutes. The number of concurrent visitors touched 250+ and there is a constant load of about 100 concurrent visitors throughout. The visitors don’t just browse, they also download pdf files which are about 2-3 MB in weight.

If this had been my Apache-Plesk site, the site would have collapsed a long while ago. Pleasantly, the Centminmod site didn’t wince at all. The max that my RAM touched was 300 MB and the CPU 4%.

So, I think it was definitely worth my while to jettison Apache-Plesk and go for Centminmod.

Investorz glad to see you're liking and benefitting form Centmin Mod :)


New centmin mod v1.2.2-eva2000.14 release today quite a few updates including proper testing and support for CentOS 5.8 and newly released Nginx v1.1.18 and MariaDB 5.2.11 MySQL server

v1.2.2-eva2000.14 - 3/04/2012


Updated memcached init.d stop/start files with $SERVERIP variable
Updated Nginx from v1.1.17 to v1.1.18 http://nginx.org/en/CHANGES
Updated libevent from v2.0.17 stable to v2.0.18 stable
Updated MariaDB 5.2.10-107 MySQL to MariaDB 5.2.11-115 MySQL http://kb.askmonty.org/en/mariadb-5211-release-notes
Updated php-fpm upgrade routine to prompt for php-fpm.conf overwrite with latest version and backup existing php-fpm.conf
Updated php-fpm.conf templates with additional settings and changing from dynamic to ondemand PHP process manager with pm.process_idle_timeout defaulting to 10 seconds
Updated YUM install/checks for CentOS 5.8 detection
Updated MariaDB 5.2.x upgrade routine


rpm -qa | grep MariaDB
MariaDB-server-5.2.11-115.el5
MariaDB-shared-5.2.11-115.el5
MariaDB-test-5.2.11-115.el5
MariaDB-client-5.2.11-115.el5
MariaDB-devel-5.2.11-115.el5

mysqladmin ver
mysqladmin Ver 9.0 Distrib 5.2.11-MariaDB, for unknown-linux-gnu on x86_64
Copyright 2000-2008 MySQL AB, 2008 Sun Microsystems, Inc,
2009 Monty Program Ab
This software comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to modify and redistribute it under the GPL license

Server version 5.2.11-MariaDB-mariadb115
Protocol version 10
Connection Localhost via UNIX socket
UNIX socket /var/lib/mysql/mysql.sock
Uptime: 1 min 52 sec

Threads: 1 Questions: 1 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.8


Full change log at:
http://centminmod.com/changelog.html

Download at:
http://vbtechsupport.com/920/ (for now until transition to centminmod.com domain).


Also Centminmod.com now has further presence and link to Centminmod.com's own Google+ Page where you can follow updates of Centminmod.com news and releases. Already 214+ folks have added Centminmod to their own circles :D

Well, I can confirm that v1.2.2-eva2000.14 is NOT compatible with Centos 6. I suggest you should have a prominent warning next to the download page so people are warned before installation. The present warning is a bit obscure I thought.

Well I tried to install v1.2.2-eva2000.14 on Centos 5 and ran into trouble there as well. Haven't noted the errors down.

Well I tried to install v1.2.2-eva2000.14 on Centos 5 and ran into trouble there as well. Haven't noted the errors down.
strange i tested all CentOS 5.7, 5.8, 6.0, 6.1 and 6.2 all 64bit though.

what errors?

be sure

If you are upgrading a server which already previously had Centmin Mod installed, you DO NOT need to run option #1, instead run option #4 and then #5 for upgrading Nginx web server and upgrading PHP.

and

For Xen 32bit OS users on 64bit host nodes, please read FAQ note regarding ARCH_OVERRIDE value you need to enable for Centmin Mod or Original Centmin script to work.

Well this is a clean machine I just took. I'll try Centos 5 64 bit and report.

it seems to be a template problem. Its got stuck at the 'updating popt' part.

Later it got stuck here

Would you like to compile nginx with IPv6 support? [y/n] y
checking for OS
+ Linux 2.6.18-274.18.1.el5.028stab098.1 x86_64
checking for C compiler ... not found

./configure: error: C compiler gcc is not found

make: *** No rule to make target `build', needed by `default'. Stop.
make: *** No rule to make target `install'. Stop.
iptables: No chain/target/match by that name

I'll try it on another machine tomorrow & report.

looks like missing gcc which should get installed as a prerequisite at the start so problem could be with your VPS and it's YUM repos.

what does output for this command reveal

yum list gcc gcc-c++ automake distcache

MariaDB 5.2.11 build 115 is out

:)

MariaDB 5.2.11 build 115 is out

:)
indeed http://www.webhostingtalk.com/showthread.php?p=8043972#post8043972 ;)

I loaded v1.2.2-eva2000.14 on another Centos 6 64 bit machine and it worked flawlessly. Would love to install it on my production site but I am running 32 bit there. If I try an upgrade there and something goes wrong, can it be uninstalled without hurting the site?

I'm running this for my wordpress site. But when I want to delete a plugin, it asking me the FTP account/details.

Did someone ever face this?

I try to run chown -R www-data:www-data /webdir, but it said there is no www-data user

I loaded v1.2.2-eva2000.14 on another Centos 6 64 bit machine and it worked flawlessly. Would love to install it on my production site but I am running 32 bit there. If I try an upgrade there and something goes wrong, can it be uninstalled without hurting the site?upgrade from what an existing centmin mod installation ? i.e. 0.13 to 0.14 ? There shouldn't be any problems if upgrade is from existing centmin mod install. Worse case is just re-run the nginx and php upgrade routines for and specify the previous nginx and php versions. i.e. if upgrading from 0.13 to 0.14 nginx versions from v1.1.17 to v1.1.18. If that fails, just re-run upgrade menu option but specify v1.1.17 instead.

Currently no uninstall routines, but working on one for disabling centmin mod installed options.

I'm running this for my wordpress site. But when I want to delete a plugin, it asking me the FTP account/details.

Did someone ever face this?

I try to run chown -R www-data:www-data /webdir, but it said there is no www-data user unless you changed nginx's default user/group, then the default user/group for centmin mod is nginx:nginx not www-data:www-data.

unless you changed nginx's default user/group, then the default user/group for centmin mod is nginx:nginx not www-data:www-data.

Thank you :)

Dear eva2000,

Is sendmail included in the installation. I don't see it listed. (it is in centmin). If not, is there an easy tutorial to receive and send mail using the server?

I'll try the upgrade on a slow day after taking a backup. (I have 32 bit ... hope that won't be a problem).

At the moment, centminmod is working very well keeping my RAM and CPU cool as a cucumber even when I get spikes of traffic.

I'm having trouble to install centmin-v1.2.2-eva2000.14 on my fresh install VPS CentOS 5.7 (32-bit). It has SSD and 1gb ram.

After the installation, all standard command like yum, vi etc doesn't work even as root. The commands work before the installation.

Any advice?

Dear eva2000,

Is sendmail included in the installation. I don't see it listed. (it is in centmin). If not, is there an easy tutorial to receive and send mail using the server?

I'll try the upgrade on a slow day after taking a backup. (I have 32 bit ... hope that won't be a problem).

At the moment, centminmod is working very well keeping my RAM and CPU cool as a cucumber even when I get spikes of traffic.
yes sendmail is indeed by default, but no tutorials, you will have to search for sendmail + centos tutorials via google or better yet just use google app free email @yourdomain.com which is what i do for my domains :)

I'm having trouble to install centmin-v1.2.2-eva2000.14 on my fresh install VPS CentOS 5.7 (32-bit). It has SSD and 1gb ram.

After the installation, all standard command like yum, vi etc doesn't work even as root. The commands work before the installation.

Any advice?What type of VPS, Xen, OpenVZ, VMWare ?

Never seen that happen before, i know after install you can't update php and mysql via YUM as i set it so in /etc/yum.conf exclude listing. What does your /etc/yum.conf contents look like now ?

should look like something like this if on 64bit centOS

[main]
cachedir=/var/cache/yum
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
distroverpkg=redhat-release
tolerant=1
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
exclude=*.i386 *.i586 *.i686 mysql* php*

# Note: yum-RHN-plugin doesn't honor this.
metadata_expire=1h

installonly_limit = 5

# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d

Heads up guys, added new FAQ item for how to upgrade at http://centminmod.com/faq.html#howtoupgrade

MariaDB 5.2.12 build 115 is out.

It's an important security fix.

I had to edit /inc/mariadb_upgrade.inc

and change

all instances of

http://mirror.aarnet.edu.au/pub/MariaDB

to

http://ftp.yz.yamagata-u.ac.jp/pub/dbms/mariadb

Tell me please, how can i setup WinSCP user for upload and download to nginx home directory?

I'm having trouble to install centmin-v1.2.2-eva2000.14 on my fresh install VPS CentOS 5.7 (32-bit). It has SSD and 1gb ram.

After the installation, all standard command like yum, vi etc doesn't work even as root. The commands work before the installation.

Any advice?

Same here although on CentOS 5.5 and instead I just wanted to update PHP, then it just broke my VPS, disabling SSH and all standard commands, and unfortunately lost some files, o well.

Same here although on CentOS 5.5 and instead I just wanted to update PHP, then it just broke my VPS, disabling SSH and all standard commands, and unfortunately lost some files, o well.

I suspect it is a problem with the VPS and not the script. I tried installing it repeatedly on UBServers and Alien Layer (on their cheapest annual plan) on multiple occasions and it failed.

The same thing on another UBServers' VPS (bit of an upgrade plan) worked.

It also worked flawlessly on Burstnet and BHost.

So, it appears that the cheapest of the cheap VPS' block some port or the other and that throttles the script. Of course, this is only my guess and not based on any evidence.

Also, there seem to be issues with the 32 bit Centos 6. Try the 64 bit Centos 6 and it works well.

There is also a problem with the NSD installation. You have to invariably "reinstall" it later.

But all said and done, it is a superb installer and keeps your VPS cool as a cucumber even in times of great stress (I just had 350+ concurrent visitors and the VPS did not even blink). So, it is worth a bit of trouble-shooting to get it right.

MariaDB 5.2.12 build 115 is out.

It's an important security fix.

I had to edit /inc/mariadb_upgrade.inc

and change

all instances of

http://mirror.aarnet.edu.au/pub/MariaDB

to

http://ftp.yz.yamagata-u.ac.jp/pub/dbms/mariadbthe original mirror does work, just you updated too soon before all mirrors had a copy of MariaDB 5.2.12 hehe.

Tell me please, how can i setup WinSCP user for upload and download to nginx home directory?google search for useradd & usermod commands for centos for adding users. But centmin mod isn't setup for shared hosting where every user has their own username/password for their own accounts. Maybe in future but not now.

Other folks can share their tips for this if they want though :)

Same here although on CentOS 5.5 and instead I just wanted to update PHP, then it just broke my VPS, disabling SSH and all standard commands, and unfortunately lost some files, o well.weird shouldn't break a VPS at all. What VPS type ? OpenVZ, KVM, Xen, VMWARE, Virtuozzo ? 32bit or 64bit ?

Misfire, what previous version of centmin mod was installed prior to trying to use 1.2.2-eva2000.14 to update PHP ? Make sure to read how to upgrade FAQ at http://centminmod.com/faq.html#howtoupgrade

I suspect it is a problem with the VPS and not the script. I tried installing it repeatedly on UBServers and Alien Layer (on their cheapest annual plan) on multiple occasions and it failed.

The same thing on another UBServers' VPS (bit of an upgrade plan) worked.

It also worked flawlessly on Burstnet and BHost.

So, it appears that the cheapest of the cheap VPS' block some port or the other and that throttles the script. Of course, this is only my guess and not based on any evidence.

Also, there seem to be issues with the 32 bit Centos 6. Try the 64 bit Centos 6 and it works well.

There is also a problem with the NSD installation. You have to invariably "reinstall" it later.

But all said and done, it is a superb installer and keeps your VPS cool as a cucumber even in times of great stress (I just had 350+ concurrent visitors and the VPS did not even blink). So, it is worth a bit of trouble-shooting to get it right.
Yeah unfortunately, I can't test every VPS type out there and every VPS provider may have differences in their setups.

I have had no problems with CentOS 6.x 32bit for buyvm.net OpenVZ and KVM based VPSes and on chicagovps.net OpenVZ CentOS 6.x 32bit and CentOS 5.7/5.8/6.0/6.1/6.2 64bit on VirtualBox local test servers.

NSD issue is that happening all the time, or that once time you experienced it ?

Heads up, also updated Nginx configure page for some example configs for cloudflare, vbulletin 4 rewrites, xenforo rewrites and wordpress http://centminmod.com/nginxconfigure/

Misfire, what previous version of centmin mod was installed prior to trying to use 1.2.2-eva2000.14 to update PHP ? Make sure to read how to upgrade FAQ at




I believe it was 1.2.2-eva2000.04, a version from October. I just wanted to update things. I mean I never had any problems before, used to work flawlessly every time I used this, but now I'm having issues installing centmin on centos 5.5. I used a centos 6 image and everything seems to be working again.

But yeah, its pretty weird.

Quite a few changes since 1.2.2-eva2000.04 http://centminmod.com/changelog.html but never see it break ssh itself and lose files.

Next version v1.2.2-eva2000.15 will have automatic logging for each menu option so can get to the bottom of some of the more problematic upgrade/installs.

i.e.

ls -lhrt /root/centminlogs/
total 5.6M
-rw-r--r-- 1 root root 4.3M Apr 11 01:12 centminmod_1.2.2-eva2000.15_110412-003308_install.log
-rw-r--r-- 1 root root 24K Apr 11 01:15 centminmod_1.2.2-eva2000.15_110412-011453_suhosin_install.log
-rw-r--r-- 1 root root 17K Apr 11 01:17 centminmod_1.2.2-eva2000.15_110412-011453_ffmpeg_install.log
-rw-r--r-- 1 root root 1016 Apr 11 01:19 centminmod_1.2.2-eva2000.15_110412-011453_nginx_addvhost.log
-rw-r--r-- 1 root root 4.3K Apr 11 01:19 centminmod_1.2.2-eva2000.15_110412-011453_nsd_setup.log
-rw-r--r-- 1 root root 30K Apr 11 01:20 centminmod_1.2.2-eva2000.15_110412-011453_apc_reinstall.log
-rw-r--r-- 1 root root 1.2M Apr 11 01:31 centminmod_1.2.2-eva2000.15_110412-011453_nginx_upgrade.log

Quite a few changes since 1.2.2-eva2000.04 but never see it break ssh itself and lose files.

Next version v1.2.2-eva2000.15 will have automatic logging for each menu option so can get to the bottom of some of the more problematic upgrade/installs.

i.e.

ls -lhrt /root/centminlogs/
total 5.6M
-rw-r--r-- 1 root root 4.3M Apr 11 01:12 centminmod_1.2.2-eva2000.15_110412-003308_install.log
-rw-r--r-- 1 root root 24K Apr 11 01:15 centminmod_1.2.2-eva2000.15_110412-011453_suhosin_install.log
-rw-r--r-- 1 root root 17K Apr 11 01:17 centminmod_1.2.2-eva2000.15_110412-011453_ffmpeg_install.log
-rw-r--r-- 1 root root 1016 Apr 11 01:19 centminmod_1.2.2-eva2000.15_110412-011453_nginx_addvhost.log
-rw-r--r-- 1 root root 4.3K Apr 11 01:19 centminmod_1.2.2-eva2000.15_110412-011453_nsd_setup.log
-rw-r--r-- 1 root root 30K Apr 11 01:20 centminmod_1.2.2-eva2000.15_110412-011453_apc_reinstall.log
-rw-r--r-- 1 root root 1.2M Apr 11 01:31 centminmod_1.2.2-eva2000.15_110412-011453_nginx_upgrade.log

To clarify, the script didn't delete any files or anything like that.

What exactly happen was this, normally the script takes at least 20 minutes to complete a fully install. However, this time when I reached the point where it installs the development tools, something would happen (maybe errors) and it would skip all the way to the end like it completed the installation in a matter of like 5 minutes or so.

If I scroll up, i can see that it said it was installing php, mariadb and what not but in actuality it didn't and just skipped it.

After I exit the menu, all the normal shell commands would not register, things like ls, vi, cd and stuff don't get recognized and I was just stuck.

If I close the ssh session, I wasn't able to connect back to it (connection refused every time, even the solusVM console counted connect, and restarting of the VPS caused it not being able to boot back up anymore.

I didn't expect SSH to stop working anymore or not being able to boot the vps back up so I lost all my files I had on there.

Exactly the same situation that ujai described with centos 5.7 on the previous page of this thread.

Weird.. either way it always pays to have back ups for your files and data on your VPS regardless - preferably remotely hosted.

Hello,

I'm having an issue with getting NSD to work, I always get this error for example:

ls: cannot access /etc/nsd/master/: No such file or directory

I read this topic and I made sure it is the .10 version, I downloaded centmin today anyway.
I'm running CentOS 6.2 32bit on XEN paravirtualization and I did the ARCH thingy mentioned in the FAQ.
Tried re-installing NSD, didn't help.
There are no yum packages for it either installed @

Package(s) nsd* available, but not installed.
No Packages marked for removal

strange indeed..

everyone having problems with NSD install, can you provide


centos version used
32bit or 64bit
virtualisation type: xen, kvm, openvz, vmware


If any of you are able to freshly reload their operating system and willing to provide me root access, i will when I have some spare time, try a test run and figure out what's going on. You can contact me (http://vbtechsupport.com/contactme/).

Right now i don't have any issues so hard for me to reproduce the problem.

Can't promise to look into everyone's VPS though.

CentOS 6.2
32bit
Xen Paravirtualization
Fresh OS installed via BurstNET template for CentOS 6.2 32bit
I will send you root info for my VPS in an hour or so.

CentOS 6.2
32bit
Xen Paravirtualization
Fresh OS installed via BurstNET template for CentOS 6.2 32bit
I will send you root info for my VPS in an hour or so.

Thanks mate, with v1.2.2-eva2000.15 with auto logging of routines, managed to figure out the problem and fix it :D

Testing the fixed version on my test servers for now before public release.

Just so you folks know what's going into v1.2.2-eva2000.15

v1.2.2-eva2000.15

Updated MariaDB 5.2.11-115 MySQL to MariaDB 5.2.12-115 MySQL http://kb.askmonty.org/en/mariadb-5212-release-notes
Updated APC Cache install and re-install routine including setting up password protected file using htpasswd.py tool
Updated php-fpm.conf files and vhost virtual.conf with pm.status and ping settings. PHP-FPM status/ping is disabled by default, uncomment setting #include /usr/local/nginx/conf/phpstatus.conf; in vhost virtual.conf and restart nginx and php-fpm services to enable. For folks upgrading Centmin Mod, ensure /usr/local/nginx/conf/phpstatus.conf exists, you can find a copy of it in v1.2.2-eva2000.15 zip file's config/nginx/phpstatus.conf location.
Fixed CentOS 6.x EPEL Repo link
Fixed NSD v3.2.10 install/reinstall issue by moving NSD install routine further down the order for installation, seems v3.2.10 complains it can't find the SSL libraries for some reason and fails to compile, so no /etc/nsd directory is created.
Add logging support to menu options. Log directory defined by variable CENTMINLOGDIR='/root/centminlogs' in inc/centminlogs.inc. When run menu option, the entire process will be logged to a time stamped text log file named ${CENTMINLOGDIR}/centminmod_${SCRIPT_VERSION}_${DT}_*.log so you can review the logs for error messages etc.


coming soon, just testing right now

Thanks mate, with v1.2.2-eva2000.15 with auto logging of routines, managed to figure out the problem and fix it :D

Testing the fixed version on my test servers for now before public release.

Just so you folks know what's going into v1.2.2-eva2000.15


coming soon, just testing right now

Oh, I wonder if this will fix my issue with 5.5. Actually, is there any reason to not use CentOS 6.x?

I recommend and prefer centos 6.x - EXT4 out of the box and updated kernel are 2 reasons :D

I recommend and prefer centos 6.x - EXT4 out of the box and updated kernel are 2 reasons :D

Thanks, def seems faster actually. Mumble used to lag when switching channels, now its instantaneous.

As a note, I initially did have a problem installing centminmod on a CentOS 6 fresh install. Everything would install correctly except for nginx.

The 2nd time I tired again, I disabled NSD from installing, and everything worked correctly.

I also remember when I first did my 5.5 centminmod setup with centminmod 04, I also didn't install NSD, and everything worked prefectly. So I believe your NSD order fix will have fixed both problems.

New centmin mod v1.2.2-eva2000.15 release today quite a few updates including Nginx v1.1.19, PHP-FPM status page support and MariaDB 5.2.12 as well as updated YUM, APC Cache and NSD install routines.

Useful addition is automated logging to time stamped text files for all menu options so you can review the entire process and troubleshoot errors etc.

Logging

ls -lhrt /root/centminlogs/

total 7.3M
-rw-r--r-- 1 root root 4.3M Apr 14 17:14 centminmod_1.2.2-eva2000.15_140412-151749_install.log
-rw-r--r-- 1 root root 1.7M Apr 14 17:44 centminmod_1.2.2-eva2000.15_140412-173219_php_upgrade.log
-rw-r--r-- 1 root root 30K Apr 14 17:44 centminmod_1.2.2-eva2000.15_140412-173219_apc_reinstall.log
-rw-r--r-- 1 root root 89K Apr 14 17:45 centminmod_1.2.2-eva2000.15_140412-173219_memcached_reinstall.log
-rw-r--r-- 1 root root 24K Apr 14 17:46 centminmod_1.2.2-eva2000.15_140412-173219_suhosin_install.log
-rw-r--r-- 1 root root 17K Apr 14 17:49 centminmod_1.2.2-eva2000.15_140412-173219_ffmpeg_install.log
-rw-r--r-- 1 root root 1.3M Apr 14 18:02 centminmod_1.2.2-eva2000.15_140412-173219_nginx_upgrade.log
-rw-r--r-- 1 root root 23K Apr 14 18:31 centminmod_1.2.2-eva2000.15_140412-183136_nsd_reinstall.log


Change Log

v1.2.2-eva2000.15 -14/04/2012


Updated Nginx from v1.1.18 to v1.1.19 http://nginx.org/en/CHANGES
Updated MariaDB 5.2.11-115 MySQL to MariaDB 5.2.12-115 MySQL http://kb.askmonty.org/en/mariadb-5212-release-notes
Updated APC Cache install and re-install routine including setting up password protected file using htpasswd.py tool
Updated YUM Install routine to be smarter in checking each package whether it's already installed and needs updating or whether it's not installed and needs installing
Updated php-fpm.conf files and vhost virtual.conf with pm.status and ping settings. PHP-FPM status/ping is disabled by default, uncomment setting #include /usr/local/nginx/conf/phpstatus.conf; in vhost virtual.conf and restart nginx and php-fpm services to enable. For folks upgrading Centmin Mod, ensure /usr/local/nginx/conf/phpstatus.conf exists, you can find a copy of it in v1.2.2-eva2000.15 zip file's config/nginx/phpstatus.conf location.
Fixed CentOS 6.x EPEL Repo link
Fixed NSD v3.2.10 install/reinstall issue by moving NSD install routine further down the order for installation, seems v3.2.10 complains it can't find the SSL libraries for some reason and fails to compile, so no /etc/nsd directory is created.
Add logging support to menu options. Log directory defined by variable CENTMINLOGDIR='/root/centminlogs' in inc/centminlogs.inc. When run menu option, the entire process will be logged to a time stamped text log file named ${CENTMINLOGDIR}/centminmod_${SCRIPT_VERSION}_${DT}_*.log so you can review the logs for error messages etc.


rpm -qa | grep MariaDB
MariaDB-shared-5.2.12-115.el5
MariaDB-devel-5.2.12-115.el5
MariaDB-server-5.2.12-115.el5
MariaDB-test-5.2.12-115.el5
MariaDB-client-5.2.12-115.el5


Server version 5.2.12-MariaDB-mariadb115
Protocol version 10
Connection Localhost via UNIX socket
UNIX socket /var/lib/mysql/mysql.sock
Uptime: 59 min 0 sec

Threads: 1 Questions: 1 Slow queries: 0 Opens: 15 Flush tables: 1
Open tables: 8 Queries per second avg: 0.0


Full change log at:
http://centminmod.com/changelog.html

Download at:
http://vbtechsupport.com/920/ (for now until transition to centminmod.com domain).


Also Centminmod.com now has further presence and link to Centminmod.com's own Google+ Page where you can follow updates of Centminmod.com news and releases. Already 220+ folks have added Centminmod to their own circles :D

Sample of new YUM install/update routine

----------------------------------------------------------------------------------
Processing package: autoconf213
Error: No matching Packages to list
----------------------------------------------------------------------------------
Installing autoconf213
----------------------------------------------------------------------------------
Installed Packages
autoconf213.noarch 2.13-12.1 installed
----------------------------------------------------------------------------------
Processing package: cronie
Error: No matching Packages to list
----------------------------------------------------------------------------------
Installing cronie
----------------------------------------------------------------------------------
Error: No matching Packages to list
----------------------------------------------------------------------------------
Processing package: crontabs
----------------------------------------------------------------------------------
Installing crontabs
----------------------------------------------------------------------------------
Package crontabs-1.10-8.noarch already installed and latest version
Installed Packages
crontabs.noarch 1.10-8 installed
----------------------------------------------------------------------------------
Processing package: cronie-anacron
Error: No matching Packages to list
----------------------------------------------------------------------------------
Installing cronie-anacron
----------------------------------------------------------------------------------
Error: No matching Packages to list
----------------------------------------------------------------------------------
Processing package: nc
----------------------------------------------------------------------------------
Installing nc
----------------------------------------------------------------------------------
Package nc-1.84-10.fc6.x86_64 already installed and latest version
Installed Packages
nc.x86_64 1.84-10.fc6 installed
----------------------------------------------------------------------------------

PHP-FPM status output

lynx --dump http://127.0.0.1/phpstatus
pool: www
process manager: ondemand
start time: 14/Apr/2012:17:49:06 +1000
start since: 974
accepted conn: 1
listen queue: 0
max listen queue: 0
listen queue len: 0
idle processes: 0
active processes: 1
total processes: 1
max active processes: 1
max children reached: 0

correct me if I'm wrong

Shouldn't these be deleted or commented

pm.start_servers = 20
pm.min_spare_servers = 5
pm.max_spare_servers = 35
pm.max_requests = 500

when pm = ondemand

in /usr/local/etc/php-fpm.conf

Just leave them as is :)

Dear eva2000, my compliments for your hard work. v1.2.2-eva2000.15 works very well. I tried it on a cheap $12 pa VPS and there were no issues at all. Even the NSD, which was the trouble-maker in the past, has fallen into line now.

I also did an upgrade on two VPS. My maria db does not seem to have been upgraded as is seen from this:

[root@abc ~]# rpm -qa | grep MariaDB
MariaDB-devel-5.2.10-107.el5.x86_64
MariaDB-client-5.2.10-107.el5.x86_64
MariaDB-server-5.2.10-107.el5.x86_64
MariaDB-shared-5.2.10-107.el5.x86_64
MariaDB-test-5.2.10-107.el5.x86_64
You have new mail in /var/spool/mail/root
[root@abc ~]#

So, is there anything that should be done to upgrade maria db. Also how does one check that the nginx, php-fpm etc have also been upgraded? (the php version is 5.3.10).

Hi! I tried to install the latest centminmod in my fresh Linode VPS but I am always stuck when downloading ngx-fancyindex-0.3.1.tar.gz.

I tried it on both CentOS 6.2 32&64 bit. Is it only me? Please advice. Thanks everyone!

Dear eva2000, my compliments for your hard work. v1.2.2-eva2000.15 works very well. I tried it on a cheap $12 pa VPS and there were no issues at all. Even the NSD, which was the trouble-maker in the past, has fallen into line now.

I also did an upgrade on two VPS. My maria db does not seem to have been upgraded as is seen from this:

[root@abc ~]# rpm -qa | grep MariaDB
MariaDB-devel-5.2.10-107.el5.x86_64
MariaDB-client-5.2.10-107.el5.x86_64
MariaDB-server-5.2.10-107.el5.x86_64
MariaDB-shared-5.2.10-107.el5.x86_64
MariaDB-test-5.2.10-107.el5.x86_64
You have new mail in /var/spool/mail/root
[root@abc ~]#for the two VPS what was previous centmin mod version installed ?

So, is there anything that should be done to upgrade maria db. Also how does one check that the nginx, php-fpm etc have also been upgraded? (the php version is 5.3.10).

Hi! I tried to install the latest centminmod in my fresh Linode VPS but I am always stuck when downloading ngx-fancyindex-0.3.1.tar.gz.

I tried it on both CentOS 6.2 32&64 bit. Is it only me? Please advice. Thanks everyone!i test first on CentOS 6.2 and have no such issues.

in ssh telnet what you do get when you manually run this command as root user

it's a single line command

cd /svr-setup; rm -rf ngx-fancyindex*; wget -c http://gitorious.org/ngx-fancyindex/ngx-fancyindex/archive-tarball/v0.3.1 -O ngx-fancyindex-0.3.1.tar.gz --tries=3

Here's the result:
--2012-04-15 13:23:45-- http://gitorious.org/ngx-fancyindex/ngx-fancyindex/archive-tarball/v0.3.1
Resolving gitorious.org... 2a02:c0:1014::1, 87.238.52.168
Connecting to gitorious.org|2a02:c0:1014::1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 13148 (13K) [application/x-gzip]
Saving to: ângx-fancyindex-0.3.1.tar.gzâ

0% [ ] 0 --.-K/s

It is just stuck there. I am using Linode hosted in Japan fyi.

if you try this command does it work ?

cd /svr-setup; rm -rf ngx-fancyindex*; wget -c http://centminmod.com/centminmodparts/nginx/modules/ngx-fancyindex-0.3.1.tar.gz --tries=3

basically, i'm hosting the file on centminmod.com instead of gitorious.org

if it works, i'll do a quick update to download zip file

Yes it's working already using centminmod.com mirror. :)

K then, updated the v1.2.2-eva2000.15 zip download package for updated mirror for that file :)

Dear eva2000, my compliments for your hard work. v1.2.2-eva2000.15 works very well. I tried it on a cheap $12 pa VPS and there were no issues at all. Even the NSD, which was the trouble-maker in the past, has fallen into line now.

I also did an upgrade on two VPS. My maria db does not seem to have been upgraded as is seen from this:

So, is there anything that should be done to upgrade maria db. Also how does one check that the nginx, php-fpm etc have also been upgraded? (the php version is 5.3.10).

sorry put my reply in the wrong place in the other post

meant to say:

for the two VPS what was previous centmin mod version installed ?

investorz, for folks on upgrading MariaDB 5.2.10 and stuck on that version, read FAQ updated item in the troubleshooting section http://centminmod.com/faq.html#troubleshootingerrors

Dear eva2000, you have thought of everything! All upgrades went off smoothly & without incident. Many thanks for your generous help.

Dear eva2000, you have thought of everything! All upgrades went off smoothly & without incident. Many thanks for your generous help.

Glad to hear it all went well :)

Quick heads up for next Centmin Mod v1.2.2-eva2000.16 release should be some time at end of April, will include updates for APC Cache v3.1.10 which is a beta release for proper PHP 5.4 support.

The php.net folks report PHP 5.4.1 will be released around April 26th, so timing Centmin Mod's next release until after PHP 5.4.1 release should be perfect. Note, Xcache and FFMPEG php extensions I am not sure work with PHP 5.4 yet.

preview of current change log for next version:

v1.2.2-eva2000.16 TBD

Updated APC Cache from v3.1.9 to v3.1.10 beta for PHP 5.4 support http://pecl.php.net/package-changelog.php?package=APC (note: v3.1.10 beta retains v3.1.9 version name in PHPINFO so I modified the APC files to correct version number to v3.1.10 etc)
Updated APC configuration template files with additional settings you will need to manually add these to your /usr/local/lib/php.ini

Centmin Mod v1.2.2-eva2000.16 released !

Change Log

v1.2.2-eva2000.16 - 29/04/2012


Updated PHP from v5.3.10 to v5.3.11 http://php.net/ChangeLog-5.php
Updated Nginx from v1.1.19 to v1.2.0 stable release http://nginx.org/en/CHANGES
Updated Xcache from v1.3.2 to v2.0.0 for PHP 5.4 support http://xcache.lighttpd.net/wiki/Release-2.0.0
Updated APC Cache from v3.1.9 to v3.1.10 beta for PHP 5.4 support http://pecl.php.net/package-changelog.php?package=APC (note: v3.1.10 beta retains v3.1.9 version name in PHPINFO so I modified the APC files to correct version number to v3.1.10 etc)
Updated APC configuration template files with additional settings you will need to manually add these to your /usr/local/lib/php.ini. You can compare using download zip's copy at config/apc/apc-min.ini or apc.ini
Updated staticfiles.conf nginx includes file. You can find updated file in zip dowload config/nginx/staticfiles.conf which you can replace and overwrite the one on server at /usr/local/nginx/conf/staticfiles.conf
Updated nginx.conf and vhost template to add a 32K buffer to access_log logging. Changes aren't updated automatically, you will need to update the /usr/local/nginx/conf/nginx.conf manually to remove line log_format bytes_log "$msec $bytes_sent ."; and add the line access_log logs/access.log combined buffer=32k;. You can compare using download zip's copy at config/nginx/nginx.conf to compare against your live servers copy
Added optional Nginx modules from Agentzh's Openresty bundle, memc-nginx-module and srcache-nginx-module. These modules are disabled by default but can be enabled by setting 'y' for new variable named NGINX_OPENRESTY=n. For more details read https://github.com/agentzh/memc-nginx-module and https://github.com/agentzh/srcache-nginx-module. No support is provided by me, optional modules are provided as is



php -v
PHP 5.4.1 (cli) (built: Apr 26 2012 21:42:00)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2012 Zend Technologies
with XCache v2.0.0, Copyright (c) 2005-2012, by mOo


nginx -V
nginx version: nginx/1.2.0
built by gcc 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC)
TLS SNI support enabled
configure arguments: --sbin-path=/usr/local/sbin --conf-path=/usr/local/nginx/conf/nginx.conf --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-http_sub_module --with-http_addition_module --with-http_secure_link_module --with-http_flv_module --with-http_realip_module --add-module=../ngx-fancyindex-ngx-fancyindex --add-module=../ngx_cache_purge-1.4 --add-module=../nginx-accesskey-2.0.3 --add-module=../agentzh-memc-nginx-module-4007350 --add-module=../agentzh-srcache-nginx-module-fa2da58 --with-openssl=../openssl-1.0.0e --with-openssl-opt=enable-tlsext

Full change log at:
http://centminmod.com/changelog.html

Download at:
http://vbtechsupport.com/920/ (for now until transition to centminmod.com domain).


Also Centminmod.com now has further presence and link to Centminmod.com's own Google+ Page where you can follow updates of Centminmod.com news and releases. Already 200+ folks have added Centminmod to their own circles :D

thanks george!
how about adding wordpress to the installer?

thanks

For now, I prefer to leave the front end web applications to the end user to install/manage - keeping the focus on server backend apps :)

I tried xcache 2.0.0 and I'm getting these errors when I click on List PHP inside the xcache administration area

Notice: Undefined index: sourcesize in /usr/local/nginx/html/myxcacheadmin/xcache.tpl.php on line 212 Notice: Undefined index: mtime in /usr/local/nginx/html/myxcacheadmin/xcache.tpl.php on line 216 Notice: Undefined index: sourcesize in /usr/local/nginx/html/myxcacheadmin/xcache.tpl.php on line 244 Notice: Undefined index: mtime in /usr/local/nginx/html/myxcacheadmin/xcache.tpl.php on line 245

Here's a screenshot

https://img.skitch.com/20120430-f45dcm728x23sethycaug2n5ij.jpg

hmmm might not have taken into account the need to update xcache admin on live servers during the xcache 1.3.2 to 2.0.0 upgrade/reinstall routine.

try this

1. rename existing xcacheadmin directory

mv /usr/local/nginx/html/myxcacheadmin /usr/local/nginx/html/myxcacheadmin_old

2. edit php.ini - you can use centmin mod command shortcut = phpedit http://centminmod.com/faq.html#commandshortcuts to quickly get to php.ini

remove entries related to xcache settings and save php.ini file

3. run menu option #8 to Install Xcache

does that work ? if it does you can remove the old version at /usr/local/nginx/html/myxcacheadmin_old

Thanks George.

It worked like a charm.

Where does centminmod store php comp/temp files? My provider decided to restart my vps in the middle of a PHP 5.3.11 upgrade, I am worried about temporary left over files.

I did re-run the upgrade process again successfully, just wondering if theres any temp files I can delete because I want to save space.

Thanks

Thanks George.

It worked like a charm.
thanks for the confirmation, looks like next version i release has to deal with this in some way for xcache jump from 1.3.2 to 2.0.0 :)

Where does centminmod store php comp/temp files? My provider decided to restart my vps in the middle of a PHP 5.3.11 upgrade, I am worried about temporary left over files.

I did re-run the upgrade process again successfully, just wondering if theres any temp files I can delete because I want to save space.

Thanks

should be /tmp :)

Where do I find the csf config file?

Where do I find the csf config file?

/etc/csf/csf.conf

:)

/etc/csf/csf.conf

:)

Don't think centminmod installs it there, there is no directory there.

Dear eva2000, I followed the upgrade instructions including reinstall of x-caxche, memcache & sohosin. I had three problems:

(i) I got a "502 Bad Gateway" error immediately after the upgrade was over. I waited several minutes, refreshed the pages several times and the pages were restored. Is this something to do with the buffer?

(ii) PHP mail function is not working. The error is "Could not instantiate mail function." (this is an existing problem and appears to have crept in during the upgrade to v.15)

(iii) When I download pdf files of 1MB+, the download ceases when the files reaches 255KB. Smaller files can be downloaded without a problem. Large files always stop at 255KB. I have tried this with 'wp-downloadmanger' and 'Wordpress Download Monitor'

As a troubleshooting exercise, I uninstalled vsftpd, csf and ip tables. However, as there is no improvement, I suspect it is a php configuration issue.

I am running Centos 6 64 bit.

Based on your vast experience, do you have any ideas on what could be causing the problem? Shall I downgrade to v.14 and see if that helps?

Addendum: The 502 Bad Gateway error is occurring quite regularly

I tried a fresh install on a 128MB Centos 6 32 bit VPS and hit a 502 Gateway error when I try to access memcache.php and myxcacheadmin. The index.html, logo etc are accessible. I uploaded a phpinfo.php file but even that is not accessible. All files are in the default root /usr/local/nginx/html

I'll do a fresh reinstall with v.15 and see what the position is.

Well, I'm happy to report that v.15 works as it should without any 502 gateway errors.

I am worried about what to do on my production site where v.16 seems to have messed things up with recurrent 502 errors. I'll try a downgrade and report.

I downgraded from v.16 to v.14 and seem to have solved the problem of the 502 gateway errors. So, that's a big relief! (the site seems to load faster but that may only be my imagination!)

The problem of download of large files being terminated at 255KB seems to be related to the "force file to download" vs. "open file in browser" setting in php. Where and when did the setting change is a mystery.

phpmail is still not functional.

Don't think centminmod installs it there, there is no directory there.sounds like CSF wasn't installed, did you select yes when prompted to install CSF when you first installed Centmin Mod ? what version of Centmin Mod ?

I downgraded from v.16 to v.14 and seem to have solved the problem of the 502 gateway errors. So, that's a big relief! (the site seems to load faster but that may only be my imagination!)

The problem of download of large files being terminated at 255KB seems to be related to the "force file to download" vs. "open file in browser" setting in php. Where and when did the setting change is a mystery.

phpmail is still not functional.

502 could be php related, list exact steps you took to

1. upgrade centmin from v0.14 to v0.16
2. to upgrade nginx from version ??? to version ???
3. to upgrade PHP from which PHP version to which PHP upgraded version
4. php mail, is sendmail properly setup ? output of this command

netstat -plant | grep sendmail; php -i | grep sendmail

create test mail.php file with contents, edit to and from email addresses and run mail.php in browser does it work ?

<?php
$to = "yourtoemail@yourdomain.com";
$subject = "Test mail";
$message = "Hello! This is a simple email message.";
$from = "yourfromemail@yourdomain.com";
$headers = "From: $from";
mail($to,$subject,$message,$headers);
echo "Mail Sent.";
?>

I haven't experienced any of these issues myself.

since v1.2.2-eva2000.0.15 added automatic logging you can also check the logs for your upgrade options via command to list the logs

ls -lhrt /root/centminlogs/

i.e.

ls -lhrt /root/centminlogs/

total 7.3M
-rw-r--r-- 1 root root 4.3M Apr 14 17:14 centminmod_1.2.2-eva2000.15_140412-151749_install.log
-rw-r--r-- 1 root root 1.7M Apr 14 17:44 centminmod_1.2.2-eva2000.15_140412-173219_php_upgrade.log
-rw-r--r-- 1 root root 30K Apr 14 17:44 centminmod_1.2.2-eva2000.15_140412-173219_apc_reinstall.log
-rw-r--r-- 1 root root 89K Apr 14 17:45 centminmod_1.2.2-eva2000.15_140412-173219_memcached_reinstall.log
-rw-r--r-- 1 root root 24K Apr 14 17:46 centminmod_1.2.2-eva2000.15_140412-173219_suhosin_install.log
-rw-r--r-- 1 root root 17K Apr 14 17:49 centminmod_1.2.2-eva2000.15_140412-173219_ffmpeg_install.log
-rw-r--r-- 1 root root 1.3M Apr 14 18:02 centminmod_1.2.2-eva2000.15_140412-173219_nginx_upgrade.log
-rw-r--r-- 1 root root 23K Apr 14 18:31 centminmod_1.2.2-eva2000.15_140412-183136_nsd_reinstall.log

and check individual log files for errors during reinstall or upgrades

Dear eva2000

(i) The output of the command:

[root@abc ~]# netstat -plant | grep sendmail; php -i | grep sendmail
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 1841/sendmail
sendmail_from => no value => no value
sendmail_path => /usr/sbin/sendmail -t -i => /usr/sbin/sendmail -t -i
Path to sendmail => /usr/sbin/sendmail -t -i

(ii) mail.php does not send any mail. I added an else argument and it shows a failure. A solution is to use smtp which works.

(iii) The 502 errors have gone by the downgrade to v. 14. I don't want to mess with that anymore because it works very well. I had 500+ concurrent visitors today downloading pdf files and my RAM did not cross 300MB. So, I am not going to finger that now.

(iv) The download problem is very peculiar because while small files continue to be downloaded normally, large files (1+ MB) files stop downloading at (exactly) 255KB. This is a critical issue for me and if I cannot resolve it, I will have to do a reinstall.

1. sendmail, php mail only had one instance of some reporting having such issues and it turned out hotmail/isp blocked their VPS's ip address from receiving email due to being on a spam list so not sure.

2. downloads, just tested on centmin mod local server with 14MB download file and downloaded fine so not sure where the problem would be ???

very strange you keep running up against issues which most folks using centmin mod don't run into :(

after the upgrade to php 3.5.13 and reinstall XCache php-v does not show XCache although bearing in php.ini

php -v
PHP 5.3.13 (cli) (built: May 9 2012 15:31:25)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies
with Suhosin v0.9.33, Copyright (c) 2007-2012, by SektionEins GmbH

php -i | grep xcache
xcache.admin.enable_auth => On => On
xcache.cacher => On => On
xcache.coredump_directory => no value => no value
xcache.count => 2 => 2
xcache.experimental => Off => Off
xcache.gc_interval => 7200 => 7200
xcache.mmap_path => /dev/zero => /dev/zero
xcache.readonly_protection => no value => no value
xcache.shm_scheme => mmap => mmap

after the upgrade to php 3.5.13 and reinstall XCache php-v does not show XCache although bearing in php.ini


PHP 5.3.13 (cli) (built: May 9 2012 15:31:25)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies
with Suhosin v0.9.33, Copyright (c) 2007-2012, by SektionEins GmbH


xcache.admin.enable_auth => On => On
xcache.cacher => On => On
xcache.coredump_directory => no value => no value
xcache.count => 2 => 2
xcache.experimental => Off => Off
xcache.gc_interval => 7200 => 7200
xcache.mmap_path => /dev/zero => /dev/zero
xcache.readonly_protection => no value => no value
xcache.shm_scheme => mmap => mmap

have not tested with PHP 5.3.13 yet as per latest tested versions listed on centminmod.com (http://centminmod.com/) web site is only at PHP 5.3.11 (have internallly tested 5.3.12 without probs but not yet 5.3.13).

Tried this method for reinstall of xcache http://www.webhostingtalk.com/showpost.php?p=8095971&postcount=128 ? let me know if that works

Tested upgrading to PHP 5.3.13 using latest centmin

great, thank you

Hi,

I've just installed onto a fresh VPS running CentOS 6 32bit with v.16 (using #1) and am encountering a 502 bad gateway error.

Restarting php-fpm gives the following output

[root@orange centmin-v1.2.2mod]# service php-fpm restart
Gracefully shutting down php-fpm warning, no pid file found - php-fpm is not running ?
Starting php-fpm /etc/init.d/php-fpm: line 68: /usr/local/sbin/php-fpm: No such file or directory
failed

A quick locate for php-fpm gives the following files and directories

[root@orange centmin-v1.2.2mod]# locate php-fpm
/etc/logrotate.d/php-fpm
/etc/rc.d/init.d/php-fpm
/etc/rc.d/rc0.d/K50php-fpm
/etc/rc.d/rc1.d/K50php-fpm
/etc/rc.d/rc2.d/S50php-fpm
/etc/rc.d/rc3.d/S50php-fpm
/etc/rc.d/rc4.d/S50php-fpm
/etc/rc.d/rc5.d/S50php-fpm
/etc/rc.d/rc6.d/K50php-fpm
/svr-setup/php-5.3.11/fpm-build/sapi/fpm/init.d.php-fpm
/svr-setup/php-5.3.11/fpm-build/sapi/fpm/php-fpm.8
/svr-setup/php-5.3.11/fpm-build/sapi/fpm/php-fpm.conf
/svr-setup/php-5.3.11/sapi/fpm/init.d.php-fpm.in
/svr-setup/php-5.3.11/sapi/fpm/php-fpm.8.in
/svr-setup/php-5.3.11/sapi/fpm/php-fpm.conf.in
/usr/local/etc/php-fpm.conf
/usr/local/src/centmin-v1.2.2mod/config/php-fpm
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm-2pools.conf
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm-min-2pools.conf
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm-min.conf
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm-min.conf-fullcomments
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm-minond.conf
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm-minond_readme.txt
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm.conf
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm.conf-fullcomments
/usr/local/src/centmin-v1.2.2mod/config/php-fpm/php-fpm.conf.default
/usr/local/src/centmin-v1.2.2mod/init/php-fpm
/var/log/php-fpm
/var/log/php-fpm/www-error.log
/var/run/php-fpm


I'm not sure where the binary has gone, any ideas?

Cheers
Bump

Bump check your install log at /root/centminlogs/ to see why php-fpm failed to install (don't post log as it's too big for forums).

If you can't see the problem, try running PHP upgrade option #5

Hi eva2000,

Looks like the box has run out of memory when compiling (128mb RAM).

I'll have to have a look at the script to see about passing some cflags to use gcc's garbage collector I'm guessing.

If you have any thoughts, just let me know.

Cheers
Bump

Minimum you'd want for Centmin Mod is 256MB to take care YUM and MariaDB requirements.

I'll have to have a think about my approach for this one.

Cheers for the help, It's much appreciated.

Bump

I'll have to have a think about my approach for this one.

Cheers for the help, It's much appreciated.

Bump

Actually CGLAGS for setting lower threshold for gcc garbarge collection may work if you just do it for php-fpm compile. Haven't tried yet. You can find php-fpm compilation includes file at inc/php_configure.inc and tinker with it if you want on a test install.

Looking into a better memory detection routine to accommodate different memory sized servers for certain routines and config file selections. Something for future Centmin Mod versions

i.e. with 128MB total memory size threshold


[root@tools]# ./memcheck.sh
Ok: physically installed memory is sufficient [Installed: 996 MB]

[root@tools]# ./memcheck.sh 131072
Ok: physically installed memory is sufficient [Installed: 128 MB]

[root@tools]# ./memcheck.sh 100000
Warning: physically installed memory too low [Installed: 97 MB < 128 MB]

I just tried internal testing for centmin mod v1.2.2-eva2000.17 with only 112MB system memory available, full install finished properly but man was it slow, swapped to disk by around 68MB, so yes you'd need at least 180-192MB to complete install safely. Although if you have swap space setup, you could do it very very slowly on 112-192MB system.

For now i setup centmin mod v1.2.2-eva2000.17 to detect less than 256MB installs and warn/abort to save the trouble if you run into issues. You will be able to override aborting install via inc/memcheck.inc file variable for next version centmin mod v1.2.2-eva2000.17 if you want to try a very slow installation with <256MB memory heh.

Centmin Mod v1.2.2-eva2000.17 released !

Change Log

v1.2.2-eva2000.17 -19/05/2012


Updated PHP from v5.3.11 to v5.3.13 http://php.net/ChangeLog-5.php
Updated libevent from v2.0.18 stable to v2.0.19 stable
Updated Xcache re-install routine to detect from 1.3.2 to 2.0.0 upgrade to update xcache admin directory. Manual instructions are provided during upgrade to properly update xcache admin directory
Updated MariaDB 5.2 Upgrade menu option to detect for MariaDB 5.3 being the existing version on server and to abort when MariaDB 5.3 server already detected. The MariaDB 5.2 Upgrade menu option is for MariaDB 5.2.x based upgrades only. Centmin Mod will have an official MariaDB 5.3 Upgrade menu option added separately in future Centmin Mod versions.
Updated EPEL release YUM install
Updated Nginx and PHP upgrade routines to to allow skipping YUM checks, end user will be prompted if they want to skip YUM checks prior to upgrading Nginx or PHP to speed up upgrade times
Updated CSF tweaks to raise both DENY_IP_LIMIT & DENY_TEMP_IP_LIMIT from 100 to 1000 entries in /etc/csf/csf.conf
Updated MariaDB 5.2 upgrade routine's download mirror to main MariaDB download mirror as it's quickest to get new MariaDB MySQL updated versions uploaded to
Added MariaDB 5.3 upgrade routine (not active right now), currently doing internal tests for probable release for Centmin Mod v1.2.3 series
Added server memory installed check, to make sure you have at least 256MB of memory to run centmin.sh installation successfully

Do you want to run YUM install checks ? [y/n]

This will increase your upgrade duration time wise.
Check the change log centminmod.com/changelog.html
to see if any Nginx or PHP related new additions
which require checking YUM prequisites are met.
If no new additions made, you can skip the
YUM install check to speed up upgrade time.

[y/n]: n

PHP Upgrade - Would you like to continue? [y/n]

ls -lhrt /root/centminlogs/
total 9.1M
-rw-r--r-- 1 root root 4.3M May 19 22:24 centminmod_1.2.2-eva2000.17_190512-213407_install.log
-rw-r--r-- 1 root root 1.2M May 19 22:37 centminmod_1.2.2-eva2000.17_190512-223132_nginx_upgrade.log
-rw-r--r-- 1 root root 1.7M May 19 22:45 centminmod_1.2.2-eva2000.17_190512-223132_php_upgrade.log
-rw-r--r-- 1 root root 32K May 19 22:46 centminmod_1.2.2-eva2000.17_190512-223132_apc_reinstall.log
-rw-r--r-- 1 root root 91K May 19 22:47 centminmod_1.2.2-eva2000.17_190512-223132_memcached_reinstall.log
-rw-r--r-- 1 root root 1.6M May 19 22:57 centminmod_1.2.2-eva2000.17_190512-225211_php_upgrade.log
-rw-r--r-- 1 root root 30K May 19 22:58 centminmod_1.2.2-eva2000.17_190512-225211_apc_reinstall.log
-rw-r--r-- 1 root root 89K May 19 22:59 centminmod_1.2.2-eva2000.17_190512-225211_memcached_reinstall.log
-rw-r--r-- 1 root root 24K May 19 23:00 centminmod_1.2.2-eva2000.17_190512-225211_suhosin_install.log
-rw-r--r-- 1 root root 17K May 19 23:13 centminmod_1.2.2-eva2000.17_190512-225211_ffmpeg_install.log

Full change log at:
http://centminmod.com/changelog.html

Download at:
http://vbtechsupport.com/920/ (for now until transition to centminmod.com domain).


Also Centminmod.com now has further presence and link to Centminmod.com's own Google+ Page where you can follow updates of Centminmod.com news and releases. Already 200+ folks have added Centminmod to their own circles :D

i have install but i have problem configure nsd


[root@joglo master]# cat ditusuk.com.zone
$TTL 14400
@ IN SOA ns1.ditusuk.com. admin.ditusuk.com. (
2010091500
300
3600
1209600
300 )

; Nameservers
ditusuk.com. 14400 IN NS ns1.ditusuk.com.
ditusuk.com. 14400 IN NS ns2.ditusuk.com.
ditusuk.org. 14400 IN NS ns1.ditusuk.com.
ditusuk.org. 14400 IN NS ns2.ditusuk.com
ditusuk.in. 14400 IN NS ns1.ditusuk.com.
ditusuk.in. 14400 IN NS ns2.ditusuk.com.
ditusuk.info. 14400 IN NS ns1.ditusuk.com.
ditusuk.info. 14400 IN NS ns2.ditusuk.com.


; A Records
ditusuk.com. 14400 IN A 94.242.208.115
ditusuk.org. 300 IN A 94.242.208.115
www.ditusuk.org. 14400 IN A 94.242.208.115
ditusuk.in. 300 IN A 94.242.208.115
ditusuk.info. 14400 IN A 94.242.208.115
ftp 14400 IN A 94.242.208.115
localhost 14400 IN A 127.0.0.1
mail 14400 IN A 94.242.208.115
ns1 14400 IN A 94.242.208.115
ns2 14400 IN A 94.242.208.115
pop 14400 IN A 94.242.208.115
smtp 14400 IN A 94.242.208.115
www 14400 IN A 94.242.208.115
ads 14400 IN A 94.242.208.115
joglo 14400 IN A 94.242.208.115
m 14400 IN A 94.242.208.115

; MX Record
ditusuk.com. 300 IN MX 10 aspmx.l.google.com
ditusuk.com. 300 IN MX 20 alt1.aspmx.l.google.com
ditusuk.com. 300 IN MX 30 alt2.aspmx.l.google.com
ditusuk.com. 300 IN MX 40 aspmx2.googlemail.com
ditusuk.com. 300 IN MX 50 aspmx3.googlemail.com
ditusuk.com. 300 IN MX 60 aspmx4.googlemail.com
ditusuk.com. 300 IN MX 70 aspmx5.googlemail.com

; TXT Record (for SPF)
ditusuk.com. 14400 IN TXT "v=spf1 a mx ip4:94.242.208.115 ~all"
[root@joglo master]#



but when i check intodns.com/ditusuk.com mail server not change to dns google ?

and intodns.com/ditusuk.org still to ns1.ditusuk.org

any advice ?

prandah, you still need to setup and register your nameservers with your domain registrar as well update domain's NS records :)